38 research outputs found
On the ultrathin gold film used as buffer layer at the transparent conductive anode/organic electron donor interface
Previously, we have shown that a gold thin film of only 0.5 nm introduced at the interface between the indium tin oxide or ZnO anode and the organic electron donor in organic photovoltaic cells induces a strong improvement of the cell efficiency. Of course a thickness of 0.5 nm corresponds only to an averaged thickness, the films being too thin to be continuous. For a clear understanding of the physical mechanisms that are responsible for this improved behaviour, it is important to know the fractional coverage and the island height of this thin Au film. In the present work, we have used two different techniques, such as treated scanning electron microscope images and analysis of the inelastic part of peaks of X-ray photoelectron spectroscopy spectra, to estimate the gold coverage and island height of the transparent conductive anode. There is an excellent agreement between the results achieved by both methods. Only 15% of the anode is covered, which proves the high efficiency of gold as an anode buffer layer in organic photovoltaic devices
Effect of the deposition conditions of NiO anode buffer layers inorganic solar cells, on the properties of these cells
tNiO thin films deposited by DC reactive sputtering were used as anode buffer layer in organic photovoltaiccells (OPVs) based on CuPc/C60planar heterojunctions. Firstly we show that the properties of the NiOfilms depend on the O2 partial pressure during deposition. The films are first conductive between 0 and2% partial oxygen pressure, then they are semiconductor and p-type between 2 and 6% partial oxygenpressure, between 6 and 9% partial oxygen pressure the conduction is very low and the films seem to be n-type and finally, for a partial oxygen pressure higher than 9%, the conduction is p-type. The morphology ofthese films depends also on the O2 partial pressure. When the NiO films is thick of 4 nm, its peak to valleyroughness is 6 nm, when it is sputtered with a gas containing 7.4% of oxygen, while it is more than double,13.5 nm, when the partial pressure of oxygen is 16.67%. This roughness implies that a forming process,i.e. a decrease of the leakage current, is necessary for the OPVs. The forming process is not necessary ifthe NiO ABL is thick of 20 nm. In that case it is shown that optimum conversion efficiency is achievedwith NiO ABL annealed 10 min at 400◦C
Recommended from our members
Hydrogen in acapulcoites and lodranites: A unique source of water for planetesimals in the inner Solar System
Acapulcoites and lodranites are primitive achondrites, sampling a common planetesimal formed a few million years after calcium-aluminium rich inclusions in the inner Solar System, that provides information into melting and differentiation processes in the early inner Solar System. The chemistry and mineralogy of their chondritic parent body lies in between enstatite and ordinary chondrites. As they record a range in planetary differentiation degree, from 1% up to 20% partial melting, with lodranites experiencing the most melt extraction, we investigate (i) the behaviour of hydrogen in terms of abundance and isotopic composition during the early stages of planetary differentiation and (ii) the source(s) of hydrogen for the acapulcoite-lodranite parent body in order to place it in our current understanding of the source(s) of water in the inner Solar System. In this study, we analysed water content and hydrogen isotopic composition of phosphates and nominally anhydrous minerals in a range of acapulcoite and lodranite meteorite samples. While apatites seemed to have recorded a degassing signature, no such variations were observed in the H2O–δD systematics of the nominally anhydrous minerals suggesting that subsequent to their crystallisation, acapulcoites and lodranites experienced minimal modifications to their volatile composition during thermal metamorphism and partial melting. The low abundance of water in acapulcoite and lodranite nominally anhydrous minerals (i.e., average 5.2±1.6 μg/g H2O) suggests that their parent body was much drier than what has been estimated for enstatite and ordinary chondrite parent bodies. We estimated a bulk water content for the acapulcoite-lodranite parent body of 3 to 19 μg/g H2O, similar to the ureilite parent body. The hydrogen isotopic composition of nominally anhydrous minerals in acapulcoites and lodranites (–211±145‰), and in particular for the two falls Acapulco and Lodran (–239±149‰), matches with the hydrogen isotopic composition recorded by nominally anhydrous minerals in ordinary chondrite falls, eucrites, S–type asteroid Itokawa, consistent with a common source of water for the inner Solar System planetesimals, isotopically distinctive to bulk carbonaceous chondrites
Recommended from our members
Chondritic chlorine isotope composition of acapulcoites and lodranites
Bulk rock chondrites and Earth’s reservoirs share a common chlorine isotopic value, while more differentiated bodies such as the Moon or Vesta record significant chlorine isotopic fractionation in their Ca phosphates. As such, an important but scarcely studied parameter is the effect of melting and differentiation processes on chlorine concentration and isotopic composition of a planetesimal. Here we report chlorine abundances and isotopic compositions for apatite in a range of primitive achondrites, acapulcoites and lodranites. These meteorites originated from a parent body that experienced some partial melting, allowing an assessment of chlorine behaviour during the early stages of planetary evolution in the inner Solar System. Overall, while bulk rock estimates of F and Cl abundances are indicative of degassing during the early stages of partial melting, no chlorine isotopic fractionation is recorded in apatite. Consequently, acapulcoites and lodranites retain their chondritic precursor isotopic signature for chlorine
Recommended from our members
Tissemouminites: A new group of primitive achondrites spanning the transition between acapulcoites and winonaites
The Northwest Africa (NWA) 090 meteorite, initially classified as an acapulcoite, presents petrological, chemical, and isotopic characteristics comparable to a group of seven primitive winonaites: Dhofar 1222, NWA 725, NWA 1052, NWA 1054, NWA 1058, NWA 1463, and NWA 8614. Five of these samples were previously classified as acapulcoites or ungrouped achondrites before being reclassified as winonaites based on their oxygen isotopic compositions. These misclassifications are indicative of the particular compositional nature of these primitive achondrites. All contain relict chondrules and a lower closure temperature of metamorphism of 820 ± 20 °C compared to other typical winonaites, as well as mineral elemental compositions similar to those of acapulcoites. The oxygen isotopic signature of these samples, δ17O of 1.18 ± 0.17‰, δ18O of 3.18 ± 0.30‰, and Δ17O of −0.47 ± 0.02, is in fact resolvable from both acapulcoites and winonaites. We investigate the relationship between these eight primitive achondrites, typical winonaites, and acapulcoites, to redefine petrological, mineralogical, and geochemical criteria of primitive achondrite classification. Distinguishing between winonaites, acapulcoites, and this group of eight primitive achondrites can be unambiguously done using a combination of several mineralogical and chemical criteria. A combination of olivine fayalite content and FeO/MnO ratio, as well as plagioclase potassium content allow us to separate these three groups without the absolute necessity of oxygen isotope analyses. NWA 090 as well as the other seven primitive achondrites, although related to winonaites, are most likely derived from a parent body distinct from winonaites and acapulcoites–lodranites, and define a new group of primitive achondrites that can be referred to as tissemouminites
Cor triatriatum and lipomatous hypertrophy of the interatrial septum in the elderly: a case report
Cor triatriatum is a rare congenital heart defect characterized by the presence of a fibromuscular membrane dividing the left atrium into two distinct chambers. Lipomatous hypertrophy of the atrial septum is an infrequently observed benign abnormality caused by large fatty tissue deposits in the interatrial septum. An increased incidence of atrial arrhythmias is described in both pathologies, while a significant obstruction of blood flow mimicking mitral stenosis is typically manifested in cor triatriatum. We report the case of a 75-year-old woman with a previously undescribed association of the above stated abnormalities detected by both transthoracic and transeosophageal echocardiography. Diagnosis was confirmed by means of computed tomography. The singular physiologic and anatomic factors underlying survival until such a late age are described. The diagnostic, therapeutic and surgical management is discussed and a short review of the literature performed
What is the Oxygen Isotope Composition of Venus? The Scientific Case for Sample Return from Earth’s “Sister” Planet
Venus is Earth’s closest planetary neighbour and both bodies are of similar size and mass. As a consequence, Venus is often described as Earth’s sister planet. But the two worlds have followed very different evolutionary paths, with Earth having benign surface conditions, whereas Venus has a surface temperature of 464 °C and a surface pressure of 92 bar. These inhospitable surface conditions may partially explain why there has been such a dearth of space missions to Venus in recent years.The oxygen isotope composition of Venus is currently unknown. However, this single measurement (Δ17O) would have first order implications for our understanding of how large terrestrial planets are built. Recent isotopic studies indicate that the Solar System is bimodal in composition, divided into a carbonaceous chondrite (CC) group and a non-carbonaceous (NC) group. The CC group probably originated in the outer Solar System and the NC group in the inner Solar System. Venus comprises 41% by mass of the inner Solar System compared to 50% for Earth and only 5% for Mars. Models for building large terrestrial planets, such as Earth and Venus, would be significantly improved by a determination of the Δ17O composition of a returned sample from Venus. This measurement would help constrain the extent of early inner Solar System isotopic homogenisation and help to identify whether the feeding zones of the terrestrial planets were narrow or wide.Determining the Δ17O composition of Venus would also have significant implications for our understanding of how the Moon formed. Recent lunar formation models invoke a high energy impact between the proto-Earth and an inner Solar System-derived impactor body, Theia. The close isotopic similarity between the Earth and Moon is explained by these models as being a consequence of high-temperature, post-impact mixing. However, if Earth and Venus proved to be isotopic clones with respect to Δ17O, this would favour the classic, lower energy, giant impact scenario.We review the surface geology of Venus with the aim of identifying potential terrains that could be targeted by a robotic sample return mission. While the potentially ancient tessera terrains would be of great scientific interest, the need to minimise the influence of venusian weathering favours the sampling of young basaltic plains. In terms of a nominal sample mass, 10 g would be sufficient to undertake a full range of geochemical, isotopic and dating studies. However, it is important that additional material is collected as a legacy sample. As a consequence, a returned sample mass of at least 100 g should be recovered.Two scenarios for robotic sample return missions from Venus are presented, based on previous mission proposals. The most cost effective approach involves a “Grab and Go” strategy, either using a lander and separate orbiter, or possibly just a stand-alone lander. Sample return could also be achieved as part of a more ambitious, extended mission to study the venusian atmosphere. In both scenarios it is critical to obtain a surface atmospheric sample to define the extent of atmosphere-lithosphere oxygen isotopic disequilibrium. Surface sampling would be carried out by multiple techniques (drill, scoop, “vacuum-cleaner” device) to ensure success. Surface operations would take no longer than one hour.Analysis of returned samples would provide a firm basis for assessing similarities and differences between the evolution of Venus, Earth, Mars and smaller bodies such as Vesta. The Solar System provides an important case study in how two almost identical bodies, Earth and Venus, could have had such a divergent evolution. Finally, Venus, with its runaway greenhouse atmosphere, may provide data relevant to the understanding of similar less extreme processes on Earth. Venus is Earth’s planetary twin and deserves to be better studied and understood. In a wider context, analysis of returned samples from Venus would provide data relevant to the study of exoplanetary systems
Aluminium diboride-type structure in Ethiopian opal-CT revealed by fast Fourier transform
International audienc