Local structural analysis of erbium-doped tellurite modified silica glass with x-ray photoelectron spectroscopy

Ultrafast laser plasma doping (ULPD) is a recently developed technique that enables the blending of femtosecond laser produced plasma from a TeO2 (target) based glass with a SiO2 (substrate) without or minimum phase separation to form a silicate glass. The background oxygen gas pressure plays a major role in ULPD as it directly impacts the plasma plume characteristics, resulting in lower erbium doped tellurite modified silica (EDTS) thickness and refractive index at higher process gas pressure. X-ray photoelectron spectroscopy (XPS) used in this study to analyse the formation of EDTS and local bonding environment of its constituents. This report confirms the presence of both target materials and SiO2 in the resulting EDTS films. XPS of O 1 s core, confirms that bridging oxygen (BO) is more dominant compared to non-bridging oxygen (NBO) in the EDTS glass network, and the amount of BO is more stand out for higher gas pressures when the glass modifiers are relatively smaller in concentration. Our study revealed the nucleation Te and Er to form metal nanoparticles in glass under certain preparation conditions/doping concentration which were previously undetected using other experimental techniques. It is important to control this nanoparticle formation in engineering EDTS for photonic device applications

Low-Cost Microfabrication for MEMS Switches and Varactors

This paper presents a low-cost micro-fabrication technique for manufacturing RF MEMS switches and varactors without intensive cleanroom environments. The fabrication process entails only laser micro-structuring technique, noncleanroom micro-lithography, standard wet-bench and hot-film emboss of SU-8 and ADEX polymers. MEMS movable structures were fabricated out of 14-μm-thick Aluminum foils and suspended above coplanar-waveguide transmission lines, which were implemented on top Duroid substrates, via 5-μm-thick SU-8 dielectric anchors. Both MEMS structures and Duroid substrate were integrated using micro-patterned polymers, developed by using dry-film ADEX and SU-8 polymers, for a composite assembly. An average fabrication yield of higher than 60% was achieved, calculated from ten fabrication attempts. The RF measurement results show that the RF MEMS devices fabricated by using the novel micro-fabrication process have good figure-of-merits, at much lower overall fabrication costs, as compared to the devices fabricated by conventional cleanroom process, enabling it as a very good micro-fabrication process for cost-effective rapid prototyping of MEMS

Reservoir dynamics of rabies in Southeast Tanzania and the roles of cross-species transmission and domestic dog vaccination

1) Understanding the role of different species in the transmission of multi-host pathogens, such as rabies virus, is vital for effective control strategies. Across most of sub-Saharan Africa domestic dogs (Canis familiaris) are considered the reservoir for rabies, but the role of wildlife has been long debated. Here we explore the multi-host transmission dynamics of rabies across southeast Tanzania. 2) Between January 2011 and July 2019 data on probable rabies cases were collected in the regions of Lindi and Mtwara. Hospital records of animal-bite patients presenting to healthcare facilities were used as sentinels for animal contact tracing. The timing, location and species of probable rabid animals was used to reconstruct transmission trees to infer who infected whom and the relative frequencies of within-and between-species transmission. 3) During the study, 688 probable human rabies exposures were identified, resulting in 47 deaths. Of these exposures, 389 were from domestic dogs (56.5%) and 262 from jackals (38.1%). Over the same period 549 probable animal rabies cases were traced: 303 in domestic dogs (55.2%) and 221 in jackals (40.3%). 4) Although dog-to-dog transmission was most commonly inferred (40.5% of transmission events), a third of inferred events involved wildlife-to-wildlife transmission (32.6%) and evidence suggested some sustained transmission chains within jackal populations. 5) A steady decline in probable rabies cases in both humans and animals coincided with the implementation of widespread domestic dog vaccination during the first six years of the study. Following the lapse of this programme dog rabies cases began to increase in one of the northernmost districts. 6) Synthesis and applications: in southeast Tanzania, despite a relatively high incidence of rabies in wildlife and evidence of wildlife-to-wildlife transmission, domestic dogs remain essential to the reservoir of infection. Continued dog vaccination alongside improved surveillance would allow a fuller understanding of the role of wildlife in maintaining transmission in this area. Nonetheless, dog vaccination clearly suppressed rabies in both domestic dog and wildlife populations, reducing both public health and conservation risks and, if sustained, has potential to eliminate rabies from this region

Femtosecond pulsed laser deposited Er3+-doped zinc-sodium tellurite glass on Si: Thin-film structural and photoluminescence properties

We characterise the thin-film structural properties and photoluminescence of femtosecond (40 fs, 800 nm) pulsed laser deposited Er3+-doped zinc-sodium tellurite glass on Si as a function of laser fluence. The laser fluence regime required for the formation of films composed of nanoparticles without droplets is found, the composition and crystallinity of the deposited material is reported and the photoluminescence of the films is characterised in dependence of film thickness

Glass-polymer superlattice for integrated optics

Glass and polymer interstacked superlattice like nanolayers were fabricated by nanosecond-pulsed laser deposition with a 193-nm-ultraviolet laser. The individual layer thickness of this highly transparent thin film could be scaled down to 2 nm, proving a near atomic scale deposition of complex multilayered optical and electronic materials. The layers were selectively doped with Er3\+ and Eu3\+ ions, making it optically active and targeted for integrated sensor application

Integrated injection seeded terahertz source and amplifier for time-domain spectroscopy.

We used a terahertz (THz) quantum cascade laser (QCL) as an integrated injection seeded source and amplifier for THz time-domain spectroscopy. A THz input pulse is generated inside a QCL by illuminating the laser facet with a near-IR pulse from a femtosecond laser and amplified using gain switching. The THz output from the QCL is found to saturate upon increasing the amplitude of the THz input power, which indicates that the QCL is operating in an injection seeded regime

Rapid identification of in vitro cell toxicity using an electrochemical membrane screening platform

This study compares the performance and output of an electrochemical phospholipid membrane platform against respective in vitro cell-based toxicity testing methods using three toxicants of different biological action (chlorpromazine (CPZ), colchicine (COL) and methyl methanesulphonate (MMS)). Human cell lines from seven different tissues (lung, liver, kidney, placenta, intestine, immune system) were used to validate this physicochemical testing system. For the cell-based systems, the effective concentration at 50 % cell death (EC₅₀) values are calculated. For the membrane sensor, a limit of detection (LoD) value was extracted as a quantitative parameter describing the minimum concentration of toxicant which significantly affects the structure of the phospholipid sensor membrane layer. LoD values were found to align well with the EC₅₀ values when acute cell viability was used as an end-point and showed a similar toxicity ranking of the tested toxicants. Using the colony forming efficiency (CFE) or DNA damage as end-point, a different order of toxicity ranking was observed. The results of this study showed that the electrochemical membrane sensor generates a parameter relating to biomembrane damage, which is the predominant factor in decreasing cell viability when in vitro models are acutely exposed to toxicants. These results lead the way to using electrochemical membrane-based sensors for rapid relevant preliminary toxicity screens

Rapid in-country sequencing of whole virus genomes to inform rabies elimination programmes.

Genomic surveillance is an important aspect of contemporary disease management but has yet to be used routinely to monitor endemic disease transmission and control in low- and middle-income countries. Rabies is an almost invariably fatal viral disease that causes a large public health and economic burden in Asia and Africa, despite being entirely vaccine preventable. With policy efforts now directed towards achieving a global goal of zero dog-mediated human rabies deaths by 2030, establishing effective surveillance tools is critical. Genomic data can provide important and unique insights into rabies spread and persistence that can direct control efforts. However, capacity for genomic research in low- and middle-income countries is held back by limited laboratory infrastructure, cost, supply chains and other logistical challenges. Here we present and validate an end-to-end workflow to facilitate affordable whole genome sequencing for rabies surveillance utilising nanopore technology. We used this workflow in Kenya, Tanzania and the Philippines to generate rabies virus genomes in two to three days, reducing costs to approximately £60 per genome. This is over half the cost of metagenomic sequencing previously conducted for Tanzanian samples, which involved exporting samples to the UK and a three- to six-month lag time. Ongoing optimization of workflows are likely to reduce these costs further. We also present tools to support routine whole genome sequencing and interpretation for genomic surveillance. Moreover, combined with training workshops to empower scientists in-country, we show that local sequencing capacity can be readily established and sustainable, negating the common misperception that cutting-edge genomic research can only be conducted in high resource laboratories. More generally, we argue that the capacity to harness genomic data is a game-changer for endemic disease surveillance and should precipitate a new wave of researchers from low- and middle-income countries

Measuring the sampling coherence of a terahertz quantum cascade laser

The emission of a quantum cascade laser can be synchronized to the repetition rate of a femtosecond laser through the use of coherent injection seeding. This synchronization defines a sampling coherence between the terahertz laser emission and the femtosecond laser which enables coherent field detection. In this letter the sampling coherence is measured in the time-domain through the use of coherent and incoherent detection. For large seed amplitudes the emission is synchronized, while for small seed amplitudes the emission is non-synchronized. For intermediate seed amplitudes the emission exhibits a partial sampling coherence that is time-dependent