Differences between and within individuals, and subprocesses of face cognition: implications for theory, research and personnel selection

Recent investigations of individual differences have demonstrated striking variability in performance both within the same subprocess in face cognition (e.g. face perception), but also between two different subprocesses (i.e. face perception versus face recognition) that are assessed using different tasks (face matching versus face memory). Such differences between and within individuals between and within laboratory tests raise practical challenges. This applies in particular to the development of screening tests for the selection of personnel in real-world settings where faces are routinely processed, such as at passport control. The aim of this study, therefore, was to examine the performance profiles of individuals within and across two different subprocesses of face cognition: face perception and face recognition. To this end, 146 individuals completed four different tests of face matching—one novel tool for assessing proficiency in face perception, as well as three established measures—and two benchmark tests of face memory probing face recognition. In addition to correlational analyses, we further scrutinized individual performance profiles of the highest and lowest performing observers identified per test, as well as across all tests. Overall, a number of correlations emerged between tests. However, there was limited evidence at the individual level to suggest that high proficiency in one test generalized to other tests measuring the same subprocess, as well as those that measured a different subprocess. Beyond emphasizing the need to honour inter-individual differences through careful multivariate assessment in the laboratory, our findings have real-world implications: combinations of tests that most accurately map the task(s) and processes of interest are required for personnel selection

Digital Image Correlation analysis on the bone displacement during split crest: An ex vivo study

The split crest is an established surgical technique for horizontal bone augmentation. It allows to place implants of adequate diameter in sites where the bone would be too thin for the implantation. In this study, two split crest techniques (using threaded bone expanders or ultrasonic bone surgery) were performed ex vivo on bovine ribs, and dental implants were then inserted in the so prepared implantation sites. Digital image correlation was used to measure the bone external surface displacement throughout the surgical procedures. Both techniques provided an adequate bone volume for implant insertion, and no significant differences were highlighted regarding the displacement. However, bone accidental fracture only occurred during split crest with threaded bone expanders, suggesting differences in the internal strain distribution induced by the two technique

Marginal bone changes around platform-switched conical connection implants placed 1 or 2 mm subcrestally: A multicenter crossover randomized controlled trial

AbstractIntroduction:This study analyzes early marginal bone modifications occurring aroundplatform-switched implants with conical connection placed 1 or 2 mm subcrestally.Methods:This crossover randomized controlled trial enrolled partially edentulouspatients needing two implants in either the posterior maxilla or mandible. Eachpatient received two platform-switched implants with conical connection inserted2 mm (Test) and 1 mm (Control) subcrestally. Definitive abutments were immediatelyconnected and, after 4 months of unsubmerged healing, screwed metal-ceramiccrowns were delivered. Radiographs were taken at implant placement (T0), prosthesisdelivery (T1), and after 1 year of prosthetic loading (T2).Results:Fifty-one patients (25 males and 26 females; mean age 61.2 ± 12.1 years)totaling 102 implants were included in the final analysis. Mean peri-implant bonelevel (PBL) reduction from T0 to T2 was not significantly different around Test (0.49± 0.32 mm) and Control implants (0.46 ± 0.35 mm;p=0.66). Multivariate linearregression models highlighted a significant positive correlation between history ofperiodontitis and PBL reduction. At T2, no Test group implant and 6 Control groupimplants exhibited PBL below the implant platform (11.8% of Control groupimplants).Conclusion:No significant differences in peri-implant marginal bone changes weredemonstrated after 1 year of prosthetic loading between platform-switched implantswith conical connection inserted either 1 or 2 mm subcrestally. However, 2 mm sub-crestal placement resulted in deeper implant positioning at T2, with no exposure oftreated implant surface and potential preventive effect against subsequent peri-implant pathology

ATHENA detector proposal - a totally hermetic electron nucleus apparatus proposed for IP6 at the Electron-Ion Collider

ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity.This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges

ATHENA detector proposal — a totally hermetic electron nucleus apparatus proposed for IP6 at the Electron-Ion Collider

ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges

Surgical relocation of a malpositioned unserviceable implant protruding into the maxillary sinus cavity. A clinical report

Malpositioned implants always result in significant mechanical and aesthetic restorative challenges. This case report describes the correction of position of an unserviceable osseointegrated implant also protruding into the maxillary sinus cavity. This surgical technique facilitated the relocation of an implant-bony segment into a more favorable aesthetic and biomechanical position in a single stage surgery

Retracted publications and their citation in dental literature: A systematic review

Objectives: The present systematic review aimed to perform an in-depth analysis of the different features of retracted publications in the dental field. Material and methods: This review has been recorded in the PROSPERO database (CRD42017075634). Two independent reviewers performed an electronic search (Pubmed, Retraction Watch) for retracted articles in dental literature up to December 31, 2018. Results: 180 retracted papers were identified, the first published in 2001. Retractions increased by 47% in the last four-year period (2014\u20132018), when compared with 2009\u20132013 (94 and 64 retracted publications, respectively). Author misconduct was the most common reason for retraction (65.0%), followed by honest scientific errors (12.2%) and publisher-related issues (10.6%). The majority of retracted research was conducted in Asia (55.6%), with 49 papers written in India (27.2%). 552 researchers (89%) are listed as authors in only one retracted article, while 10 researchers (1.6%) are present in five or more retracted publications. Retracted articles were cited 530 times after retraction: the great majority of these citations (89.6%) did not consider the existence of the retraction notice and treated data from retracted articles as reliable. Conclusions: Retractions in dental literature have constantly increased in recent years, with the majority of them due to misconduct and fraud. The publication of unreliable research has many negative consequences. Studies derived from such material are designed on potentially incorrect bases, waste funds and resources, and most importantly, increase risk of incorrect treatment for patients. Citation of retracted papers represents a major issue for the scientific community

Laurell-Gottlow suture modified by Sentineri for tight closure of a wound with a single line of sutures

Laurell-Gottlow suture modified by Sentineri for tight closure of a wound with a single line of suture

Relocation of a malpositioned maxillary implant with piezoelectric osteotomies: a case report.

Implant relocation is a new surgical technique for correcting the alignment of malpositioned implants by mobilizing them with the surrounding bone until the desired position is achieved. In this case report, a 25-year-old woman was treated for the malposition of an implant in the maxillary left canine site. The use of a piezoelectric scalpel permits narrow, precise, and safe osteotomies, thus preventing involvement of the soft tissue and producing better healing potential compared to burs or saws. The results suggest that inadequately axially inclined implants can be successfully reconfigured using segmental piezoelectric osteotomies