Local Development Initiatives - an Intercultural Comparison: Life Strategies and Global Structural Change

Series: IIR-Discussion Paper

Planar E-Band (71-76 GHz) Platforms for Integrating Millimeter Wave Photodiodes with WR-12 Waveguides

A planar 71-76 GHz integration platform is designed and fabricated for high-power radio-over-fiber (RoF) wireless photonic transmitters (PTs). The platform enables the integration of high-electron-mobility-transistor RF amplifiers and millimeter wave photodiodes (PDs), e.g., the waveguide triple transit region PD. An efficient electrical coupling between the PD chip and the rectangular waveguide (WR-12) output is attained through a low-loss grounded coplanar waveguide to a rectangular waveguide transition. The integration platform features a novel planar bias-tee design making use of a single quarter-wave coupled-lines (SCLs) section and slotted split-ring resonators (SRRs). The bias-tee network enables proper biasing for the PD chip and protects the hybrid integrated RF amplifier from being damaged by the DC bias voltage. The introduced design together with the WR-12 output enables the development of high-power (>17 dBm) PTs for mobile backhaul links and radar applications. Experimental characterization of the designed platform is introduced and compared to numerical results

A 220 GHz to 325 GHz Grounded Coplanar Waveguide Based Periodic Leaky-Wave Beam-Steering Antenna in Indium Phosphide Process

This paper presents a novel periodic grounded coplanar waveguide (GCPW) leaky-wave antenna implemented in an Indium Phosphide (InP) process. The antenna is designed to operate in the 220 GHz–325 GHz frequency range, with the goal of integrating it with an InP uni-traveling-carrier photodiode to realize a wireless transmitter module. Future wireless communication systems must deliver a high data rate to multiple users in different locations. Therefore, wireless transmitters need to have a broadband nature, high gain, and beam-steering capability. Leaky-wave antennas offer a simple and cost-effective way to achieve beam-steering by sweeping frequency in the THz range. In this paper, the first periodic GCPW leaky-wave antenna in the 220 GHz–325 GHz frequency range is demonstrated. The antenna design is based on a novel GCPW leaky-wave unit cell (UC) that incorporates mirrored L-slots in the lateral ground planes. These mirrored L-slots effectively mitigate the open stopband phenomenon of a periodic leaky-wave antenna. The leakage rate, phase constant, and Bloch impedance of the novel GCPW leaky-wave UC are analyzed using Floquet’s theory. After optimizing the UC, a periodic GCPW leaky-wave antenna is constructed by cascading 16 UCs. Electromagnetic simulation results of the leaky-wave antenna are compared with an ideal model derived from a single UC. The two design approaches show excellent agreement in terms of their reflection coefficient and beam-steering range. Therefore, the ideal model presented in this paper demonstrates, for the first time, a rapid method for developing periodic leaky-wave antennas. To validate the simulation results, probe-based antenna measurements are conducted, showing close agreement in terms of the reflection coefficient, peak antenna gain, beam-steering angle, and far-field radiation patterns. The periodic GCPW leaky-wave antenna presented in this paper exhibits a high gain of up to 13.5 dBi and a wide beam-steering range from −60° to 35° over the 220 GHz–325 GHz frequency range

Factors influencing the spatial and temporal distribution of microplastics at the sea surface – A year-long monitoring case study from the urban Kiel Fjord, southwest Baltic Sea

Highlights: • Microplastic abundance was overall low and not related to environmental parameters. • High microplastic loads were found on few occasions after rainfall and snowmelt. • Microplastics were mainly hard fragments of PE and PP in various colours. • Microplastic contamination from the wastewater treatment plant was the lowest. • Stormwater drains are important source of microplastics into the marine environment. Abstract: Microplastics are ubiquitous to most marine environments worldwide, and their management has become one of the major challenges facing stakeholders. Here we monitored monthly, between March 2018 and March 2019, the abundance of microplastics (0.3–18.2 mm) at the sea surface within the Kiel Fjord, southwest Baltic Sea. Microplastics were sampled at eight locations, inside and outside the fjord, near potential source of microplastics, such as the outlets of storm drains or the Kiel-Bülk wastewater treatment plant, the Schwentine River mouth and the entrance of the Kiel Canal. Weather (wind, precipitations) and seawater (salinity, temperature) parameters were compared to the spatiotemporal distribution of the microplastics. We found an overall stable, and low (0.04 particles/m3), microplastic load within the Kiel Fjord compared to other urban areas worldwide with comparable population densities. No relationship was found between the microplastic abundance and the environmental factors, but the few samples that yielded unusually high amount of microplastics were all preceded by rainfall and snow/ice melt. During such events, vast amounts of water, potentially contaminated with microplastics, were released into the fjord via the storm drainage system. The microplastic abundances at the wastewater plant outflow were among the lowest of our survey, likely thanks to an efficient filtering system. The results of this study highlight the importance to repeat microplastic samplings over time and space to determine with confidence baseline microplastic abundance and to detect unusual acute contamination, especially during snow and ice melting. Overall, the microplastic abundance within the Kiel Fjord was low, probably thanks to efficient waste management on land. However, improvements are still needed to filter millimetre-sized particles within the storm drainage system, which is likely a major source of microplastics into the marine environment

Microwave soft x-ray microscopy for nanoscale magnetization dynamics in the 5-10 GHz frequency range

We present a scanning transmission x-ray microscopy setup combined with a novel microwave synchronization scheme in order to study high frequency magnetization dynamics at synchrotron light sources. The sensitivity necessary to detect small changes of the magnetization on short time scales and nanometer spatial dimensions is achieved by combination of the developed excitation mechanism with a single photon counting electronics that is locked to the synchrotron operation frequency. The required mechanical stability is achieved by a compact design of the microscope. Our instrument is capable of creating direct images of dynamical phenomena in the 5-10 GHz range, with 35 nm resolution. When used together with circularly polarized x-rays, the above capabilities can be combined to study magnetic phenomena at microwave frequencies, such as ferromagnetic resonance (FMR) and spin waves. We demonstrate the capabilities of our technique by presenting phase resolved images of a 6 GHz nanoscale spin wave generated by a spin torque oscillator, as well as the uniform ferromagnetic precession with ~0.1 deg amplitude at 9 GHz in a micrometer-sized cobalt strip.Comment: 9 pages, 7 figure

Radio-over-fiber-supported 60GHz multiuser transmission using leaky wave antenna

Simultaneous transmission to multiple users using a single-feed leaky-wave antenna (LWA) has been demonstrated. A composite signal transported through a Radio-over-Fibre (RoF) setup is upconverted to V-band frequencies and a LWA is used to direct different user data to their respective locations. An EVM analysis has been performed for two-user and three-user transmission for a range of angular locations. A performance analysis for user interference has been carried out by varying the signal spacing for 152 MHz and 305 MHz bandwidth OFDM signals, centered at 61.75 GHz after 4m of wireless transmission. The experimental results show degradation not only due to insufficient frequency spacing between the channels but also when the sidelobe interference of the neighboring data channels is higher

Design and characterization of terahertz CORPS beam forming networks

This work reviews the design and applicability of beam-forming networks based on Coherently Radiating Periodic Structures (CORPS-BFN) at Terahertz (THz) frequency bands. These versatile networks offer two operation modes: a continuous beam steering – feeding an antenna array with a linearly progressive phase distribution – using a reduced number of phase controls; or a multi-beam operation, generating independent, overlapped beams. These networks are built upon the concatenation of power combiners/dividers (PCDs) with isolated outputs. The isolation is provided by monolithically integrated resistors, implemented with Ti/TiO thin films for the first time. In this work, a planar prototype of a (inputs/outputs) microstrip CORPS-BFN for operation in the WR3.4/WM-864 band (220–330 GHz) on a thin 50 m Indium Phosphide (InP) substrate is designed, fabricated, and characterized. The measured S-parameters show a reflection coefficient better than -15 dB and an insertion loss between 1.6 and 3.2 dB in the whole band. In addition, an isolation better than 20 dB between the input ports has been measured. An overall remarkable agreement is observed between the measurements and the simulations. Last, the applications, scalability and efficiency of this type of networks at the targeted band are discussed in detail.This research was funded partially by the FPU Program from the Spanish Ministry of Science and Innovation, grant No. FPU18/00013, and project PID2019-109984RB-C43 (FRONT-MiliRAD); by the Deutsche Forschungs-Gemeinschaft (DFG, German Research Foundation) under Project 287022738-CRC/TRR 196 MARIE (Projects C02, C05, C06, C07 and S03); by BMBF (smartBeam, 6GEM grant No. EFRE-0400215, grant No.16KISK017 and grant No.16KISK039) and by the NRW/EFRE Terahertz-Integrationszentrum (Open6GHub and THz.NRW). Open Access funding provided by Universidad Pública de Navarra