Statistical features of edge turbulence in RFX-mod from Gas Puffing Imaging

Plasma density fluctuations in the edge plasma of the RFX-mod device are measured through the Gas Puffing Imaging Diagnostics. Statistical features of the signal are quantified in terms of the Probability Distribution Function (PDF), and computed for several kinds of discharges. The PDFs from discharges without particular control methods are found to be adequately described by a Gamma function, consistently with the recent results by Graves et al [J.P. Graves, et al, Plasma Phys. Control. Fusion 47, L1 (2005)]. On the other hand, pulses with external methods for plasma control feature modified PDFs. A first empirical analysis suggests that they may be interpolated through a linear combination of simple functions. An inspection of the literature shows that this kind of PDFs is common to other devices as well, and has been suggested to be due to the simultaneous presence of different mechanisms driving respectively coherent bursts and gaussian background turbulence. An attempt is made to relate differences in the PDFs to plasma conditions such as the local shift of the plasma column. A simple phenomenological model to interpret the nature of the PDF and assign a meaning to its parameters is also developed.Comment: 27 pages. Published in PPC

investigation of probe surfaces after ion cyclotron wall conditioning in asdex upgrade

For the first time, material analysis techniques have been applied to study the effect of ion cyclotron wall conditioning (ICWC) on probe surfaces in a metal-wall machine. ICWC is a technique envisaged to contribute to the removal of fuel and impurities from the first wall of ITER. The objective of this work was to assess impurity migration under ICWC operation. Tungsten probes were exposed in ASDEX Upgrade to discharges in helium. After wall conditioning, the probes were covered with a co-deposited layer containing D, B, C, N, O and relatively high amount of He. The concentration ratio He/C+B was 0.7. The formation of the co-deposited layer indicates that a fraction of the impurities desorbed from the wall under ICWC operation are transported by plasma and deposited away from their original location. Keywords: ICWC, Erosion-deposition, Fuel removal, Ion beam analysis, ASDEX Upgrad

Microalgae production in fresh market wastewater and its utilization as a protein substitute in formulated fish feed for oreochromis spp.

Rapid growing of human population has led to increasing demand of aquaculture production. Oreochromis niloticus or known as tilapia is one of the most globally cultured freshwater fish due to its great adaptation towards extreme environment. Besides, farming of tilapia not only involves small scales farming for local consumption but also larger scales for international market which contributes to a foreign currency earning. Extensive use of fishmeal as feed for fish and for other animals indirectly caused an increasing depletion of the natural resource and may consequently cause economic and environmental unstable. Microalgae biomass seems to be a promising feedstock in aquaculture industry. It can be used for many purposes such as live food for fish larvae and dried microalgae to substitute protein material in fish feed. The microalgae replacement in fish feed formulation as protein alternative seem potentially beneficial for long term aqua-business sustainability. The present chapter discussed the potential of microalgae as an alternative nutrition in fish feed formulations, specifically Tilapia

The plasma boundary in Single Helical Axis RFP plasmas

Single Helical Axis (SHAx) states obtained in high current reversed field pinch (RFP) plasmas display, aside from a dominant mode in the m=1 spectrum, also a dominant m=0 mode, with the same toroidal mode number as the m=1 one. The two modes have a fixed phase relationship. The island chain created by the m=0 mode across the reversal surface gives rise, at shallow reversal of the toroidal field, to an X-point structure which separates the last closed flux surface from the first wall, creating a divertor-like configuration. The plasma-wall interaction is found to be related to the connection length of the field lines intercepting the wall, which displays a pattern modulated by the dominant mode toroidal periodicity. This configuration, which occurs only for shallow toroidal field reversal, could be exploited to realize an island divertor in analogy to stellarators.Comment: 12 pages, 9 figures Submitted to Nuclear Fusio

Start of SPIDER operation towards ITER neutral beams

Heating Neutral Beam (HNB) Injectors will constitute the main plasma heating and current drive tool both in ITER and JT60-SA, which are the next major experimental steps for demonstrating nuclear fusion as viable energy source. In ITER, in order to achieve the required thermonuclear fusion power gain Q=10 for short pulse operation and Q=5 for long pulse operation (up to 3600s), two HNB injectors will be needed [1], each delivering a total power of about 16.5 MW into the magnetically-confined plasma, by means of neutral hydrogen or deuterium particles having a specific energy of about 1 MeV. Since only negatively charged particles can be efficiently neutralized at such energy, the ITER HNB injectors [2] will be based on negative ions, generated by caesium-catalysed surface conversion of atoms in a radio-frequency driven plasma source. A negative deuterium ion current of more than 40 A will be extracted, accelerated and focused in a multi-aperture, multi-stage electrostatic accelerator, having 1280 apertures (~ 14 mm diam.) and 5 acceleration stages (~200 kV each) [3]. After passing through a narrow gas-cell neutralizer, the residual ions will be deflected and discarded, whereas the neutralized particles will continue their trajectory through a duct into the tokamak vessels to deliver the required heating power to the ITER plasma for a pulse duration of about 3600 s. Although the operating principles and the implementation of the most critical parts of the injector have been tested in different experiments, the ITER NBI requirements have never been simultaneously attained. In order to reduce the risks and to optimize the design and operating procedures of the HNB for ITER, a dedicated Neutral Beam Test Facility (NBTF) [4] has been promoted by the ITER Organization with the contribution of the European Union\u2019s Joint Undertaking for ITER and of the Italian Government, with the participation of the Japanese and Indian Domestic Agencies (JADA and INDA) and of several European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache. The NBTF, nicknamed PRIMA, has been set up at Consorzio RFX in Padova, Italy [5]. The planned experiments will verify continuous HNB operation for one hour, under stringent requirements for beam divergence (< 7 mrad) and aiming (within 2 mrad). To study and optimise HNB performances, the NBTF includes two experiments: MITICA, full-scale NBI prototype with 1 MeV particle energy and SPIDER, with 100 keV particle energy and 40 A current, aiming at testing and optimizing the full-scale ion source. SPIDER will focus on source uniformity, negative ion current density and beam optics. In June 2018 the experimental operation of SPIDER has started

Pattern and determinants of hospitalization during heat waves: an ecologic study

<p>Abstract</p> <p>Background</p> <p>Numerous studies have investigated mortality during a heatwave, while few have quantified heat associated morbidity. Our aim was to investigate the relationship between hospital admissions and intensity, duration and timing of heatwave across the summer months.</p> <p>Methods</p> <p>The study area (Veneto Region, Italy) holds 4577408 inhabitants (on January 1^st, 2003), and is subdivided in seven provinces with 60 hospitals and about 20000 beds for acute care. Five consecutive heatwaves (three or more consecutive days with Humidex above 40°C) occurred during summer 2002 and 2003 in the region. From the regional computerized archive of hospital discharge records, we extracted the daily count of hospital admissions for people aged ≥75, from June 1 through August 31 in 2002 and 2003. Among people aged over 74 years, daily hospital admissions for disorders of fluid and electrolyte balance, acute renal failure, and heat stroke (grouped in a single nosologic entity, heat diseases, HD), respiratory diseases (RD), circulatory diseases (CD), and a reference category chosen a priori (fractures of the femur, FF) were independently analyzed by Generalized Estimating Equations.</p> <p>Results</p> <p>Heatwave duration, not intensity, increased the risk of hospital admissions for HD and RD by, respectively, 16% (p < .0001) and 5% (p < .0001) with each additional day of heatwave duration. At least four consecutive hot humid days were required to observe a major increase in hospital admissions, the excesses being more than twofold for HD (p < .0001) and about 50% for RD (p < .0001). Hospital admissions for HD peaked equally at the first heatwave (early June) and last heatwave (August) in 2004 as did RD. No correlation was found for FF or CD admissions.</p> <p>Conclusion</p> <p>The first four days of an heatwave had only minor effects, thus supporting heat health systems where alerts are based on duration of hot humid days. Although the finding is based on a single late summer heatwave, adaptations to extreme temperature in late summer seem to be unlikely.</p

Electromagnetic turbulent structures: A ubiquitous feature of the edge region of toroidal plasma configurations

Electromagnetic features of turbulent filaments, emerging from a turbulent plasma background, have been studied in four different magnetic configurations: the stellarator TJ-II, the Reversed Field Pinch RFX-mod, a device that can be operated also as a ohmic tokamak, and the Simple Magnetized Torus, TORPEX. By applying an analogous diagnostic concept in all cases, direct measurements of both field-aligned current density and vorticity were performed inside the filament. The inter-machine comparison reveals a clear dependence of the filament vorticity upon the local time-averaged E x B flow shear. Furthermore, a wide range of local beta was explored allowing concluding that this parameter plays a fundamental role in the appearance of filament electromagnetic features

Spectroscopy near the proton drip line in the deformed A=130 mass region : the Pr-126 nucleus

The near proton drip line nucleus Pr-126 was studied via in-beam gamma-ray spectroscopy using the Ca-40 + Mo-92 reaction at 190 MeV. We observed for the first time excited states above the known isomer in this nucleus up to 31 h over bar. The observed band is discussed in the interacting boson-fermion-fermion model.The calculations and the experimental information suggest a spin 8(+) for the lowest observed state.With such a spin assignment the moment of inertia of Pr-126 gets larger than in the heavier Pr isotopes, suggesting a sudden change in deformation close to the proton drip line

Stable triaxiality at the highest spins in 138 Nd and 139 Nd

The nuclei ${}^{138}\mathrm{Nd}$ and ${}^{139}\mathrm{Nd}$ have been studied at very high spins via the ${}^{48}\mathrm{Ca}{+}^{94}\mathrm{Zr}$ reaction. Several new rotational bands were observed, four in ${}^{138}\mathrm{Nd}$ and two in ${}^{139}\mathrm{Nd}.$ The ${J}^{(2)}$ moments of inertia calculated from the observed \ensuremath{\gamma}-ray energies are very small and almost constant, indicating that these bands are triaxial. Cranked Nilsson-Strutinsky calculations reproduce the general behavior of the bands, supporting this interpretation and suggesting an approximately constant \ensuremath{\gamma} value of \ensuremath{\sim}+35\ifmmode^\circ\else\textdegree\fi{} over a large spin range up to the highest observed spins. These bands and a few similar bands in other nuclei of the N\ensuremath{\approx}80 region are a unique example of almost undisturbed triaxial bands