Microphotonic parabolic light directors fabricated by two-photon lithography

We have fabricated microphotonic parabolic light directors using two-photon lithography, thin-film processing, and aperture formation by focused ion beam lithography. Optical transmission measurements through upright parabolic directors 22 μm high and 10 μm in diameter exhibit strong beam directivity with a beam divergence of 5.6°, in reasonable agreement with ray-tracing and full-field electromagnetic simulations. The results indicate the suitability of microphotonic parabolic light directors for producing collimated beams for applications in advanced solar cell and light-emitting diode designs

An Unusual Evolution of Krukenberg Tumour: A Case Report

Krukenberg tumours are rare metastatic tumours of the ovaries characterized by the presence of mucin-producing neoplastic Signet Ring Cell Carcinoma (SRCC). At first glance, this tumour may be confused with a primary ovarian tumour. Surgery and chemotherapy combination have led to improvement in prognosis, but it still remains severe. We report the case of a 60-year-old woman with a Krukenberg tumour rising from a low differentiated gastric adenocarcinoma. The patient was clinically stable for 26 months after surgery until she experienced a prompt decline and died of cerebral haemorrhage within two weeks. The aim of this article was to give an overview of the Krukenberg tumour starting from our case report and comparing it with clinicopathological characteristics of this pathology derived from a review of recent literatur

Robotic vs laparoscopic total mesorectal excision for rectal cancers: has a paradigm change occurred? A systematic review by updated meta-analysis

Aim The debate about the oncological adequacy, safety and efficiency of robotic vs laparoscopic total mesorectal excision for rectal cancers continues. Therefore, an updated, traditional and cumulative meta-analysis was performed with the aim of assessing the new evidence on this topic. Method A systematic search of the literature for data pertaining to the last 25 years was performed. Fixed- and random-effects models were used to cumulatively assess the accumulation of evidence over time. Results Patients with a significantly higher body mass index (BMI), tumours located approximately 1 cm further distally and more patients undergoing neoadjuvant therapy were included in the robotic total mesorectal excision (RTME) cohort compared with those in the laparoscopic total mesorectal excision (LTME) cohort [RTME, mean difference (MD) = 0.22 (0.07, 0.36), P = 0.005; LTME, MD = -0.97 (-1.57, 0.36), P < 0.002; OR = 1.47 (1.11, 1.93), P = 0.006]. Significantly lower conversion rates to open surgery were observed in the RTME cohort than in the LTME cohort [OR = 0.33 (0.24, 0.46), P < 0.001]. Operative time in the LTME cohort was significantly reduced (by 50 min) compared with the RTME cohort. Subgroup analysis of the three randomized controlled trials (RCTs) challenged all the significant results of the main analysis and demonstrated nonsignificant differences between the RTME cohort and LTME cohort. Conclusion Although the RTME cohort included patients with a significantly higher BMI, more distal tumours and more patients undergoing neoadjuvant therapy, this cohort demonstrated lower conversion rates to open surgery when compared with the LTME cohort. However, subgroup analysis of the RCTs demonstrated nonsignificant differences between the two procedures

An assessment of microstructure and properties of laser clad coatings of ultrafine eutectic beta Ti-Fe-Nb-Sn composite for implants

[EN] High mechanical strength (1800¿2500 MPa), elastic modulus (50¿110 GPa) close to that of human bone and good corrosion resistance are some characteristics of ultrafine eutectic Ti-based nanocomposite alloys. This is explained due to a combination of soft ß-Ti (bcc) matrix and hard/refined TiFe and/or Ti3Sn intermetallic particles. The present study focuses on the production and characterization of Ti-Fe-Nb-Sn eutectic alloys using biocompatible ß-stabilizer elements, such as Nb, Fe and Sn. Different fabrication techniques based on rapid solidification may be highlighted considering the application of these alloys as implant materials. In the present investigation, the processing routes comprise single tracks and coatings (overlapped tracks) by laser melting of pre-alloyed powders of the Ti66Fe20Nb8Sn6 alloy deposited into a Ti substrate. To select this composition (i.e., the Ti66Fe20Nb8Sn6 alloy), three Ti-Fe-Nb based chemistries (Ti63Fe23Nb8Sn6, Ti60Fe23Nb8Sn9 and Ti66Fe20Nb8Sn6) were originally generated under bulk conditions by using a suction casting apparatus. These alloys were further evaluated. All samples were analyzed by metallography, X-ray diffraction (XRD), scanning electron microscopy (SEM-EBSD and SEM-EDS), microhardness, nanohardness and elastic modulus. The results showed that the proportions of the formed TiFe and Ti3Sn intermetallic particles dispersed within the soft ß-Ti matrix play a fundamental role on the final properties. Lower elastic modulus (E ~72 GPa) is associated with the Ti66Fe20Nb8Sn6 bulk alloy. The laser clad coatings showed a broad range of nanohardness (4.8¿8.0 GPa) and elastic modulus (98¿150 GPa) depending on the related laser power and scanning speeds.The authors acknowledge the financial supports provided by CNPq (National Council for Scientific and Technological Development - Universal Project # 473777/2011-8) and by FAPESP (Sao Paulo State Research Foundation - Thematic Project # 2013/05987-8). Furthermore, we are grateful for the Grants (#2015/17090-8 - BEPE of A.L.V. and # 2015/19978-6 - BPE of C.R.M.A.) provided by FAPESP.Afonso, CRM.; Vidilli, AL.; Spinelli, JE.; Riva, R.; Amigó, V.; Kiminami, CS. (2017). An assessment of microstructure and properties of laser clad coatings of ultrafine eutectic beta Ti-Fe-Nb-Sn composite for implants. Surface and Coatings Technology. 328:161-171. https://doi.org/10.1016/j.surfcoat.2017.08.035S16117132

The spatio-temporal mapping of epileptic networks: Combination of EEG–fMRI and EEG source imaging

Simultaneous EEG–fMRI acquisitions in patients with epilepsy often reveal distributed patterns of Blood Oxygen Level Dependant (BOLD) change correlated with epileptiform discharges. We investigated if electrical source imaging (ESI) performed on the interictal epileptiform discharges (IED) acquired during fMRI acquisition could be used to study the dynamics of the networks identified by the BOLD effect, thereby avoiding the limitations of combining results from separate recordings. Nine selected patients (13 IED types identified) with focal epilepsy underwent EEG–fMRI. Statistical analysis was performed using SPM5 to create BOLD maps. ESI was performed on the IED recorded during fMRI acquisition using a realistic head model (SMAC) and a distributed linear inverse solution (LAURA). ESI could not be performed in one case. In 10/12 remaining studies, ESI at IED onset (ESIo) was anatomically close to one BOLD cluster. Interestingly, ESIo was closest to the positive BOLD cluster with maximal statistical significance in only 4/12 cases and closest to negative BOLD responses in 4/12 cases. Very small BOLD clusters could also have clinical relevance in some cases. ESI at later time frame (ESIp) showed propagation to remote sources co-localised with other BOLD clusters in half of cases. In concordant cases, the distance between maxima of ESI and the closest EEG–fMRI cluster was less than 33 mm, in agreement with previous studies. We conclude that simultaneous ESI and EEG–fMRI analysis may be able to distinguish areas of BOLD response related to initiation of IED from propagation areas. This combination provides new opportunities for investigating epileptic networks

Spectral index of the Galactic foreground emission in the 50-87 MHz range

Radiometry using individual dipole antennas is a potentially effective way to study the cosmological epoch referred to as Cosmic Dawn (z~20) through measurement of sky brightness arising from the 21~cm transition of neutral hydrogen, provided this can be disentangled from much stronger Galactic and extragalactic foregrounds. In the process, measured spectra of integrated sky brightness temperature can be used to quantify properties of the foreground emission. In this work we analyze data from the Large-aperture Experiment to Detect the Dark Age (LEDA) in the range 50-87 MHz to constrain the spectral index $\beta$ of foreground emission in the northern sky. We focus on two zenith-directed LEDA radiometers and study how estimates of $\beta$ vary with local sidereal time (LST). We correct for the effect of gain pattern chromaticity and compare estimated absolute temperatures with simulations. During times with the best observing conditions, for a "reference" radiometer, we estimate that $\beta$ varies from -2.55 to -2.58, consistent with previous measurements of the southern sky and simulated sky models. Using data from the second, experimental, radiometer, we observe a similar trend vs. LST although with slightly smaller $|\beta|$, in the $-2.46 < \beta < -2.43$ range. We infer good instrument stability from consistency in computed spectral indices at a level of 1-2$\sigma$ for LST=9-12.5h, using data distributed between mid-2018 to mid-2019. Evidence for spectral curvature is weak owing to residual systematic errors, other than when the Galactic Center is in the sky, at which time we find evidence for negative curvature, $\gamma$~-0.4.Comment: 13 pages, 19 figure

Topology and phase transitions: a paradigmatic evidence

We report upon the numerical computation of the Euler characteristic \chi (a topologic invariant) of the equipotential hypersurfaces \Sigma_v of the configuration space of the two-dimensional lattice $\phi^4$ model. The pattern \chi(\Sigma_v) vs. v (potential energy) reveals that a major topology change in the family {\Sigma_v}_{v\in R} is at the origin of the phase transition in the model considered. The direct evidence given here - of the relevance of topology for phase transitions - is obtained through a general method that can be applied to any other model.Comment: 4 pages, 4 figure

Patterns and localized structures in bistable semiconductor resonators

We report experiments on spatial switching dynamics and steady state structures of passive nonlinear semiconductor resonators of large Fresnel number. Extended patterns and switching front dynamics are observed and investigated. Evidence of localization of structures is given.Comment: 5 pages with 9 figure

Measuring the mass of the central black hole in the bulgeless galaxy ngc 4395 from gas dynamical modeling

NGC 4395 is a bulgeless spiral galaxy, harboring one of the nearest known type 1 Seyfert nuclei. Although there is no consensus on the mass of its central engine, several estimates suggest it is one of the lightest massive black holes (MBHs) known. We present the first direct dynamical measurement of the mass of this MBH from a combination of two-dimensional gas kinematic data, obtained with the adaptive optics assisted near-infrared integral field spectrograph Gemini/NIFS and high-resolution multiband photometric data from Hubble Space Telescope's Wide Field Camera 3. We use the photometric data to model the shape and stellar mass-to-light ratio of the nuclear star cluster (NSC). From the Gemini/NIFS observations, we derive the kinematics of warm molecular hydrogen gas as traced by emission through the H2 1–0 S(1) transition. These kinematics show a clear rotational signal, with a position angle orthogonal to NGC 4395's radio jet. Our best-fitting tilted ring models of the kinematics of the molecular hydrogen gas contain a black hole with mass M={4}-3+8× {10}5 M⊙ (3σ uncertainties) embedded in an NSC of mass M=2× {10}6 M⊙. Our black hole mass measurement is in excellent agreement with the reverberation mapping mass estimate of Peterson et al. but shows some tension with other mass measurement methods based on accretion signals