Mounting of accelerometers with structural adhesives: experimental characterization of the dynamic response

The use of accelerometers to monitor the vibrations of either complex machinery or simple components involves some considerations about the mounting of the sensor to the structure. Different types of mounting solutions are commonly used, but in all cases they can be classified in one of these categories: stud mounting, screw mounting, adhesive mounting, magnetic mounting, and probe sensing. Indeed, each of them has a specific field of application depending on e.g. the mounting surface conditions, the temperature, the accessibility to the specific mounting point, etc. The choice of the mounting solution has an important effect on the accuracy of the usable frequency response of the accelerometer, since the higher the stiffness of the fixing, the higher the low-pass frequency limit of the mounting. This article specifically focuses on adhesive mounting of accelerometers, which includes a great number of different products from the temporary adhesives like the beeswax to the permanent ones like cyanoacrylate polymers. Among the variety of commercial adhesives, three specific products have been experimentally compared to assess their transmissivity and the results are reported in this article. A two-component methylmethacrylate (HBM X60), a modified silane (Terostat 737), and a cyanoacrylate (Loctite 454) adhesive have been used to join two aluminum bases, one connected to an accelerometer and the other to the head of electromagnetic shaker. A design of experiment (DOE) approach was used to test the system at several levels of amplitude and frequency of the external sinusoidal excitation supplied by the shaker

Effect of Temperature on the Dynamic Response of Adhesively Mounted Accelerometers

This paper focuses on the effect of temperature on the frequency response function (FRF) of three different structural adhesives; namely a two component methylmethacrylate (HBM X60), a modified silane (Terostat 939) and a cyanoacrylate (Loctite 454). The structural adhesives are commonly used in vibration analysis to mount accelerometers on structures or machines. The stiffness of the adhesive can influence the response function on large frequency band, affecting the proportional excitation between the structure and the accelerometer. In the “system structure + adhesive + accelerometer”, the adhesive may acts like a filter between the source and the sink of vibrations. A variation of the dynamic response of the filter could lead to an erroneous analysis. The authors already investigated the relation between the frequency response function and operating conditions of the test. This paper expands the research by considering the temperature effect in order to depict a complete picture of the adhesive behavior on dynamic response of an accelerometer. A design of experiments (DOE) approach was used to test two bonded aluminum bases at different levels of temperature and frequency of the external sinusoidal excitation, supplied by an electromagnetic shaker. The results clearly demonstrate that the adhesive is not able to change the system response, therefore the signal transmission is good in the entire range of temperature regardless the adhesive chosen

Innovazioni Tecnologiche e Sfide Educative: riflessioni sulle esperienze europee

Ao assumir o cargo de Diretor-Geral do Instituto Nacional de Estudos Pedagógicos (1952-1964), Anísio Spínola Teixeira desencadearia a discussão da reconstrução educacional em bases cientificas e sociais. Este trabalho pretende refletir sobre a aparelhagem institucional representada pelo Centro Brasileiro de Pesquisas Educacionais, pelos Centros Regionais de Pesquisas Educacionais e pelos Centros de Estudos e Pesquisas Educacionais vinculados à s Secretarias de Educação ou à s universidades que se destinaram a executar o Plano de Reconstrução Educacional de Anísio Teixeira e colaboradores. O texto constitui-se em uma reflexão acerca das vicissitudes da materialização do Plano de Reconstrução Educacional de Anísio Teixeira em alguns Estados brasileiros, especialmente no Rio Grande do Norte

Rice Bran By-Product: From Valorization Strategies to Nutritional Perspectives

The aim of this study is to review the innovative techniques based on bioprocessing, thermal or physical treatments which have been proposed during the last few decades to convert rice bran into a valuable food ingredient. Rice bran (Oryza sativa) is the main by-product of rice grain processing. It is produced in large quantities worldwide and it contains a high amount of valuable nutrients and bioactive compounds with significant health-related properties. Despite that, its application in food industry is still scarce because of its sensitivity to oxidation processes, instability and poor technological suitability. Furthermore, the health-related effects of pretreated rice bran are also presented in this review, considering the up-to-date literature focused on both in vivo and in vitro studies. Moreover, in relation to this aspect, a brief description of rice bran arabinoxylans is provided. Finally, the application of rice bran in the food industry and the main technology aspects are concisely summarized

A novel uncoupled quasi-3D Euler-Euler model to study the spiral jet mill micronization of pharmaceutical substances at process scale: model development and validation

In this work we present a novel approach to model the micronization of pharmaceutical ingredients at process scales and times. 3D single-phase fluid-dynamics simulations are used to compute the gas velocity field within a spiral jet mill which are provided as input in a 1D compartmentalized model to calculate solid velocities along the radial direction. The particles size reduction is taken into account through a breakage kernel that is function of gas energy and local solid holdup. Simulation results are validated against micronization experiments for lactose and paracetamol, comparing the model predictions with D10, D50 and D90 diameters values coming from Design of Experiments isosurfaces. The developed model allows for a fair estimation of the outlet particle size distribution in a short computational time, with very good predictions especially for D90 values

Does Myasthenia Gravis Affect Long-Term Survival in Thymic Carcinomas? An ESTS Database Analysis

Background: Thymic carcinoma is a rare and highly malignant tumor with a dismal prognosis, which occasionally coexists with myasthenia gravis (MG). This study aims to investigate the MG incidence on a surgical cohort of patients with thymic carcinoma and to explore its influence on long-term survival. Methods: the prospectively collected data from the ESTS database on thymic epithelial tumors were reviewed. Clinical, pathological, and survival information on thymic carcinoma were analyzed. Results: the analysis was conducted on 203 patients, with an equal gender distribution (96 males and 107 females). MG was detected in 22 (10.8%) patients, more frequently elderly (>60 years, p = 0.048) and male (p = 0.003). Induction therapy was performed in 22 (10.8%) cases. After surgery, 120 (59.1%) patients had a Masaoka stage II-III while complete resection (R0) was achieved in 158 (77.8%). Adjuvant therapy was performed in 68 cases. Mean follow-up was 60 (SD = 14) months. The 3-year, 5-year and 10-year survival rates were 79%, 75% and 63%, respectively. MG did not seem to influence long-term survival (5-year survival in non-MG-TCs 78% vs. 50% in MG-TCs, p = ns) as age < 60 years, female gender, early Masaoka stage, and postoperative radiotherapy did, conversely. Conclusions: myasthenia occurred in about 10% of thymic carcinomas and it did not seem to affect significantly the long-term prognosis in surgically treated thymic carcinoma-patients

The Role of Pathological Method and Clearance Definition for the Evaluation of Margin Status after Pancreatoduodenectomy for Periampullary Cancer. Results of a Multicenter Prospective Randomized Trial

Simple SummaryThere is no clear evidence on the most effective method of pathological analysis and clearance definition (0 vs. 1 mm) to define R1 resection after pancreatoduodenectomy (PD). However, several studies showed that the R1 resection is a poor prognostic factor in patients that have undergone PDs for periampullary cancers. In this randomized clinical trial, specimens were randomized with two pathological methods, the Leeds Pathology Protocol (LEEPP) or the conventional method adopted before the study. The 1 mm clearance is the most effective factor in determining R1 rate after PD but only when adopting the LEEP, the R1 resection represents a significant prognostic factor.Background: There is extreme heterogeneity in the available literature on the determination of R1 resection rate after pancreatoduodenectomy (PD); consequently, its prognostic role is still debated. The aims of this multicenter randomized study were to evaluate the effect of sampling and clearance definition in determining R1 rate after PD for periampullary cancer and to assess the prognostic role of R1 resection. Methods: PD specimens were randomized to Leeds Pathology Protocol (LEEPP) (group A) or the conventional method adopted before the study (group B). R1 rate was determined by adopting 0- and 1-mm clearance; the association between R1, local recurrence (LR) and overall survival (OS) was also evaluated. Results. One-hundred-sixty-eight PD specimens were included. With 0 mm clearance, R1 rate was 26.2% and 20.2% for groups A and B, respectively; with 1 mm, R1 rate was 60.7% and 57.1%, respectively (p &gt; 0.05). Only in group A was R1 found to be a significant prognostic factor: at 0 mm, median OS was 36 and 20 months for R0 and R1, respectively, while at 1 mm, median OS was not reached and 30 months. At multivariate analysis, R1 resection was found to be a significant prognostic factor independent of clearance definition only in the case of the adoption of LEEPP. Conclusions. The 1 mm clearance is the most effective factor in determining the R1 rate after PD. However, the pathological method is crucial to accurately evaluate its prognostic role: only R1 resections obtained with the adoption of LEEPP seem to significantly affect prognosis

Application of nnU-Net for Automatic Segmentation of Lung Lesions on CT Images and Its Implication for Radiomic Models.

Radiomics investigates the predictive role of quantitative parameters calculated from radiological images. In oncology, tumour segmentation constitutes a crucial step of the radiomic workflow. Manual segmentation is time-consuming and prone to inter-observer variability. In this study, a state-of-the-art deep-learning network for automatic segmentation (nnU-Net) was applied to computed tomography images of lung tumour patients, and its impact on the performance of survival radiomic models was assessed. In total, 899 patients were included, from two proprietary and one public datasets. Different network architectures (2D, 3D) were trained and tested on different combinations of the datasets. Automatic segmentations were compared to reference manual segmentations performed by physicians using the DICE similarity coefficient. Subsequently, the accuracy of radiomic models for survival classification based on either manual or automatic segmentations were compared, considering both hand-crafted and deep-learning features. The best agreement between automatic and manual contours (DICE = 0.78 ± 0.12) was achieved averaging 2D and 3D predictions and applying customised post-processing. The accuracy of the survival classifier (ranging between 0.65 and 0.78) was not statistically different when using manual versus automatic contours, both with hand-crafted and deep features. These results support the promising role nnU-Net can play in automatic segmentation, accelerating the radiomic workflow without impairing the models' accuracy. Further investigations on different clinical endpoints and populations are encouraged to confirm and generalise these findings

Disciplinary problems among high achiever students: the types and the causes

This qualitative study has been done to 24 teachers and 72 students from various secondary schools in Penang, Malaysia, in order to investigate the effect of between class ability grouping (BCAG) on high achiever secondary school students. Studies reported that BCAG triggered correspondence bias among teachers, which eventually affect them to show different perception and expectations towards high achiever classes (HAC) and low achiever classes (LAC) students. Symbolic interaction theories explained that individuals tend to be affected by others’ expectation, and therefore behave in a way they were expected to. Therefore, according to the previous studies on BCAG, it was assumed that HAC students would achieve better and would not be significantly involved in disciplinary problems. After semi-structured interview had been conducted in order to collect the data, and two-cycled analyses method, namely In-Vivo and Thematic Analyses had been operated in order to analyze the massive amount of qualitative data, the it was discovered that HAC students were involved with disciplinary problems, such as being disrespectful to teachers, paying less attention in the classroom, neglecting assignments and doing external work during classes. Other findings of this study showed that the disciplinary problems among HAC are related to their self-esteem types due to locus of control difference, as well as bigger issues apart from the competition among themselves. School management system, BCAG itself, reciprocal envy between HAC and LAC students, as well as their inclination towards tuition centers contributed to disciplinary problems among HAC students

The importance of a taste. A comparative study on wild food plant consumption in twenty-one local communities in Italy

A comparative food ethnobotanical study was carried out in twenty-one local communities in Italy, fourteen of which were located in Northern Italy, one in Central Italy, one in Sardinia, and four in Southern Italy. 549 informants were asked to name and describe food uses of wild botanicals they currently gather and consume. Data showed that gathering, processing and consuming wild food plants are still important activities in all the selected areas. A few botanicals were quoted and cited in multiple areas, demonstrating that there are ethnobotanical contact points among the various Italian regions (Asparagus acutifolius, Reichardia picroides, Cichorium intybus, Foeniculum vulgare, Sambucus nigra, Silene vulgaris, Taraxacum officinale, Urtica dioica, Sonchus and Valerianella spp.). One taxon (Borago officinalis) in particular was found to be among the most quoted taxa in both the Southern and the Northern Italian sites