Comparison of the Effects of Two Whitening Toothpastes on Microhardness of the Enamel and a Microhybride Composite Resin: An in Vitro Study

Introduction: Whitening toothpastes which have been accepted in populations may affect properties of enamel and restorative materials. The aim of this study was to compare the microhardness of human enamel and Z250 microhybrid composite resin after brushing with two whitening toothpastes.Materials and Methods: In this experimental study of enamel specimens, forty five freshly extracted human incisors were prepared and divided into three groups of control enamel (ClE), Crest enamel (CtE) and Aquafresh enamel (AfE). For composite resin specimens, forty five cylindrical-shaped specimens of light-cured Z250 composite were prepared and divided into three groups of control composite (ClC), Crest composite (CtC) and Aquafresh composite (AfC). The control groups were brushed without toothpaste. Crest and Aquafresh group specimens were brushed with Crest and Aquafresh whitening toothpastes, respectively. Vickers microhardness test wasperformed for all groups. Data were analyzed by One-way ANOVA and Tukey tests.Results: Microhardness values of ClE, CtE, AfE, ClC, CtC and AfC groups were 332.99 ± 26.59, 313.99 ± 20.56, 323.57 ± 27.96, 137.1 ± 3.16, 122.95 ± 3.27 and 130.36 ± 4.8, respectively. One-way ANOVA showed no significant differences among three enamel groups but there was significant difference among composite groups(p<0.01).Conclusion: Crest and Aquafresh whitening toothpastes did not affect enamel hardness but reduced the microhardness value of Z-250 composite resin. However, Crest whitening toothpaste decreased the microhardness more than Aquafresh

Premi\`ere valeur propre du laplacien, volume conforme et chirurgies

We define a new differential invariant a compact manifold by $V_{\mathcal M}(M)=\inf_g V_c(M,[g])$, where $V_c(M,[g])$ is the conformal volume of $M$ for the conformal class $[g]$, and prove that it is uniformly bounded above. The main motivation is that this bound provides a upper bound of the Friedlander-Nadirashvili invariant defined by \inf_g\sup_{\tilde g\in[g]}\lambda_1(M,\tilde g)\Vol(M,\tilde g)^{\frac 2n}. The proof relies on the study of the behaviour of $V_{\mathcal M}(M)$ when one performs surgeries on $M$.Comment: 11 pages, 5 figures, in Frenc

FILOU oscillation code

The present paper provides a description of the oscillation code FILOU, its main features, type of applications it can be used for, and some representative solutions. The code is actively involved in CoRoT/ESTA exercises (this volume) for the preparation for the proper interpretation of space data from the CoRoT mission. Although CoRoT/ESTA exercises have been limited to the oscillations computations for non-rotating models, the main characteristic of FILOU is, however, the computation of radial and non-radial oscillation frequencies in presence of rotation. In particular, FILOU calculates (in a perturbative approach) adiabatic oscillation frequencies corrected for the effects of rotation (up to the second order in the rotation rate) including near degeneracy effects. Furthermore, FILOU works with either a uniform rotation or a radial differential rotation profile (shellular rotation), feature which makes the code singular in the field.Comment: 6 pages, 5 figures. Astrophysics and Space Science (in press

Ramified rolling circle amplification for synthesis of nucleosomal DNA sequences

Nucleosomes are a crucial platform for the recruitment and assembly of protein complexes that process the DNA. Mechanistic and structural in vitro studies typically rely on recombinant nucleosomes that are reconstituted using artificial, strong-positioning DNA sequences. To facilitate such studies on native, genomic nucleosomes, there is a need for methods to produce any desired DNA sequence in an efficient manner. The current methods either do not offer much flexibility in choice of sequence or are less efficient in yield and labor. Here, we show that ramified rolling circle amplification (RCA) can be used to produce milligram amounts of a genomic nucleosomal DNA fragment in a scalable, one-pot reaction overnight. The protocol is efficient and flexible in choice of DNA sequence. It yields 10-fold more product than PCR, and rivals production using plasmids. We demonstrate the approach by producing the genomic DNA from the human LIN28B locus and show that it forms functional nucleosomes capable of binding pioneer transcription factor Oct4

Nonlinear mode coupling in rotating stars and the r-mode instability in neutron stars

We develop the formalism required to study the nonlinear interaction of modes in rotating Newtonian stars in the weakly nonlinear regime. The formalism simplifies and extends previous treatments. At linear order, we elucidate and extend slightly a formalism due to Schutz, show how to decompose a general motion of a rotating star into a sum over modes, and obtain uncoupled equations of motion for the mode amplitudes under the influence of an external force. Nonlinear effects are added perturbatively via three-mode couplings. We describe a new, efficient way to compute the coupling coefficients, to zeroth order in the stellar rotation rate, using spin-weighted spherical harmonics. We apply this formalism to derive some properties of the coupling coefficients relevant to the nonlinear interactions of unstable r-modes in neutron stars, postponing numerical integrations of the coupled equations of motion to a later paper. From an astrophysical viewpoint, the most interesting result of this paper is that many couplings of r-modes to other rotational modes (modes with zero frequencies in the non-rotating limit) are small: either they vanish altogether because of various selection rules, or they vanish to lowest order in the angular velocity. In zero-buoyancy stars, the coupling of three r-modes is forbidden entirely and the coupling of two r-modes to one hybrid rotational mode vanishes to zeroth order in rotation frequency. In incompressible stars, the coupling of any three rotational modes vanishes to zeroth order in rotation frequency.Comment: 62 pages, no figures. Corrected error in computation of coupling coefficients, added new selection rule and an appendix on energy and angular momentum of mode

Performance of Candidate Urinary Biomarkers for Pancreatic Cancer - Correlation with Pancreatic Cyst Malignant Progression?

Background Intraductal papillary mucinous neoplasms (IPMN) are precursors of pancreatic cancer. Potential biomarkers of IPMN progression have not been identified in urine. A few urinary biomarkers were reported to be predictive of pancreatic ductal adenocarcinoma (PDAC). Here, we seek to assess their ability to detect high-risk IPMN. Methods Urine was collected from patients undergoing pancreatic resection and healthy controls. TIMP-1(Tissue Inhibitor of Metalloproteinase-1), LYVE-1(Lymphatic Vessel Endothelial Receptor 1), and PGEM(Prostaglandin E Metabolite) levels were determined by ELISA and analyzed by Kruskal-Wallis. Results Median urinary TIMP-1 levels were significantly lower in healthy controls (n = 9; 0.32 ng/mg creatinine) compared to PDAC (n = 13; 1.95) but not significantly different between low/moderate-grade (n = 20; 0.71) and high-grade/invasive IPMN (n = 20; 1.12). No significant difference in urinary LYVE-1 was detected between IPMN low/moderate (n = 16; 0.37 ng/mg creatinine) and high/invasive grades (n = 21; 0.09). Urinary PGEM levels were not significantly different between groups. Conclusions Urinary TIMP-1, LYVE-1, and PGEM do not correlate with malignant potential of pancreatic cysts

On the use of Process Mining and Machine Learning to support decision making in systems design

Research on process mining and machine learning techniques has recently received a significant amount of attention by product development and management communities. Indeed, these techniques allow both an automatic process and activity discovery and thus are high added value services that help reusing knowledge to support decision-making. This paper proposes a double layer framework aiming to identify the most significant process patterns to be executed depending on the design context. Simultaneously, it proposes the most significant parameters for each activity of the considered process pattern. The framework is applied on a specific design example and is partially implemented.FUI GONTRAN

Patient satisfaction in an acute medicine department in Morocco

<p>Abstract</p> <p>Background</p> <p>Patients' satisfaction is an important indicator for quality of care. Measuring healthcare quality and improving patient satisfaction have become increasingly prevalent, especially among healthcare providers and purchasers of healthcare. This is mainly due to the fact that consumers are becoming increasingly more knowledgeable about healthcare. No studies of inpatients' satisfaction with hospital care have been conducted in Morocco. The first objective of the present study was to confirm the reliability and validity of the Arabic version of the EQS-H (Echelle de Qualité des Soins en Hospitalisation). The second objective was to evaluate patient satisfaction in an acute medicine department in Morocco by using the EQS-H questionnaire; and also to assess the influence of certain demographics, socioeconomics, and health characteristics in patient satisfaction.</p> <p>Methods</p> <p>it was a patient survey conducted in an acute medicine department of a Moroccan University Hospital. We surveyed their socio demographic status, and health characteristics at admission. We performed structured face to face interviews with patients who were discharged from hospital. The core of the EQS-H questionnaire was translated to Arabic, adapted to the present setting, and then used to measure patient satisfaction with quality of care. The internal consistency of the EQS-H scale was assessed by Chronbach's coefficient alpha. Validity was assessed by factor analysis. Factors influencing inpatients' satisfaction were identified using multiple linear regression.</p> <p>Results</p> <p>The Arabic version of EQS-H demonstrated an excellent internal consistency for the two dimensions studied (0.889 for 'quality of medical information' (MI) and 0.906 for 'Relationship with staff and daily routine' (RS)). The principal component analysis confirmed the bidimensional structure of the questionnaire and explained 60% of the total variance. In the univariate analysis, urban residence, higher income, better perceived health status compared to admission, better perceived health status compared to people of the same age, and satisfaction with life in general were related to MI dimension; Otherwise, mal gender, urban residence, higher income, staying in double room, better perceived health status compared to admission, and satisfaction with life in general were related to RS dimension. The multiple linear regression showed that four independent variables were associated with higher satisfaction in MI: More than 2 prior hospitalizations, a longer length of stay (10-14 days) (<it>P </it>= 0.002), staying in double room (<it>P </it>= 0.022), and better perceived health status compared to admission (<it>P </it>= 0.036). Three independent variables were associated with higher satisfaction in RS: a longer length of stay (10-14 days) (<it>P </it>= 0.017), better perceived health status compared to admission day (<it>P </it>= 0.013), and satisfaction with life in general (<it>P </it>= 0.006).</p> <p>Conclusions</p> <p>Our current data assessing patient satisfaction with acute health care by the Arabic version of the EQS-H showed that the satisfaction rate was average on MI dimension; and good on RS dimension of the questionnaire. The majority of participants were satisfied with the overall care. Demographic, socioeconomic, and health characteristics may influence in-patients satisfaction in Morocco, a low/middle income country. An appreciation and understanding of these factors is essential to develop socio culturally appropriate interventions in order to improve satisfaction of patients.</p