Isotropic-Resolution Tomographic Diffractive Microscopy

International audienceMicroscopy techniques based on recording of the optical field diffracted by the specimen, in amplitude and phase, like Digital Holographic Microscopy (DHM) have been a growing research topic in recent years. Tomographic acquisitions are possible if one is able to record information, while controlling variations of the specimen illumination. Classical approaches consider either illumination variation, simple to implement, but suffering fro the classical "missing cone" problem, or sample rotation, delivering images with quasi-isotropic, but lower resolution. We have developed an original-, combined tomographic diffractive microscope setup, making use of specimen rotation as well as illumination rotation, which is able to deliver images with an almost isotropic resolution better than 200 nm

Two-Photon Absorption in a Conformationally Twisted D-π-A Oligomer : A Synergic Photosensitizing Approach for Multiphoton Lithography

International audienceA comparative study of the linear and nonlinear optical properties of a novel triphenylamine–pyrimidine alternated oligomer and its corresponding V-shaped quadrupolar monomer is presented. Both chromophores strikingly exhibit the same spectral shape when considering their respective one- and two-photon absorption spectra. This effect was attributed to a weak interchromophore coupling within the oligomer which exhibits a highly distorted geometry resulting in a strong reduction of the effective conjugation length. The recursive implementation of nine monomers into a three-dimensional architecture leads however to a cooperative enhancement of the two-photon absorption (2PA) cross-section with a δMAX of 5093 GM at 800 nm. This very high 2PA ability has been oriented to improve the two-photon induced polymerization efficiency of a bicomponent photoinitiator system implying a hexaarylbiimidazole used as a H-abstractor and an aliphatic amine used as a H-donor. The photosensitizing mechanism is investigated and we clearly show that the intrinsic photoinitiation efficiency of the oligomer is increased by a factor 3 as compared to its corresponding monomer. We therefore demonstrate that such a two-photon sensitizing strategy leads to a synergy effect combining a higher photoinitiation reactivity and a very large two-photon absorption cross-section

Soft molecularly imprinted nanoparticles with simultaneous lossy mode and surface plasmon multi-resonances for femtomolar sensing of serum transferrin protein

: The simultaneous interrogation of both lossy mode (LMR) and surface plasmon (SPR) resonances was herein exploited for the first time to devise a sensor in combination with soft molecularly imprinting of nanoparticles (nanoMIPs), specifically entailed of the selectivity towards the protein biomarker human serum transferrin (HTR). Two distinct metal-oxide bilayers, i.e. TiO2-ZrO2 and ZrO2-TiO2, were used in the SPR-LMR sensing platforms. The responses to binding of the target protein HTR of both sensing configurations (TiO2-ZrO2-Au-nanoMIPs, ZrO2-TiO2-Au-nanoMIPs) showed femtomolar HTR detection, LODs of tens of fM and KDapp ~ 30 fM. Selectivity for HTR was demonstrated. The SPR interrogation was more efficient for the ZrO2-TiO2-Au-nanoMIPs configuration (sensitivity at low concentrations, S = 0.108 nm/fM) than for the TiO2-ZrO2-Au-nanoMIPs one (S = 0.061 nm/fM); while LMR was more efficient for TiO2-ZrO2-Au-nanoMIPs (S = 0.396 nm/fM) than for ZrO2-TiO2-Au-nanoMIPs (S = 0.177 nm/fM). The simultaneous resonance monitoring is advantageous for point of care determinations, both in terms of measurement's redundancy, that enables the cross-control of the measure and the optimization of the detection, by exploiting the individual characteristics of each resonance

Achieving saturation in vertical organic transistors for organic light-emitting diode driving by nanorod channel geometric control

When conventional field-effect transistors with short channel length suffer from non-saturated output characteristics, this work proposed a vertical channel transistor to operate like a solid-state vacuum tube and exhibit good saturated curves. We utilized deep ultra-violet interference lithography to produce ordered grid-like metal to control the potential profile in vertical channel. We compared experimental and simulated characteristics to investigate the keys to achieve saturation. Finally, with an optimized design, a vertical organic transistor is used to drive a solution-processed white-light organic light-emitting diode to perform a luminescence control (0-260 cd/m(2)) with a 3.3-V base potential swing. (C) 2013 AIP Publishing LLC. [10.1063/1.4802999

Rapid Prototyping of Polymeric Nanopillars by 3D Direct Laser Writing for Controlling Cell Behavior

Mammalian cells have been widely shown to respond to nano-and microtopography that mimics the extracellular matrix. Synthetic nano-and micron-sized structures are therefore of great interest in the field of tissue engineering, where polymers are particularly attractive due to excellent biocompatibility and versatile fabrication methods. Ordered arrays of polymeric pillars provide a controlled topographical environment to study and manipulate cells, but processing methods are typically either optimized for the nano-or microscale. Here, we demonstrate polymeric nanopillar (NP) fabrication using 3D direct laser writing (3D DLW), which offers a rapid prototyping across both size regimes. The NPs are interfaced with NIH3T3 cells and the effect of tuning geometrical parameters of the NP array is investigated. Cells are found to adhere on a wide range of geometries, but the interface depends on NP density and length. The Cell Interface with Nanostructure Arrays (CINA) model is successfully extended to predict the type of interface formed on different NP geometries, which is found to correlate with the efficiency of cell alignment along the NPs. The combination of the CINA model with the highly versatile 3D DLW fabrication thus holds the promise of improved design of polymeric NP arrays for controlling cell growth

Polarization-dependent fluorescence from an anisotropic gold/polymer hybrid nano-emitter

Based on nanoscale photopolymerization triggered by the dipolar surface plasmon mode, we developed a light-emitting gold nanoparticle/Eosin Y-doped polymer hybrid nanostructure. Due to the anisotropic spatial distribution of the dipolar surface plasmon mode during photopolymerization, this nano-emitter is anisotropic in both geometry and emission. The trapped dye molecules in the hybrid nanostructure display fluorescence intensity that is dependent upon the polarization of the incident excitation light. This nano-emitter further allows the photo-selection of fluorescence configuration (i.e., molecule concentration and refractive index of active medium) by controlling the incident polarization. (C) 2014 AIP Publishing LLC

Deep ultraviolet laser direct write for patterning sol-gel InGaZnO semiconducting micro/nanowires and improving field-effect mobility

Deep-UV (DUV) laser was used to directly write indium-gallium-zinc-oxide (IGZO) precursor solution and form micro and nanoscale patterns. The directional DUV laser beam avoids the substrate heating and suppresses the diffraction effect. A IGZO precursor solution was also developed to fulfill the requirements for direct photopatterning and for achieving semi-conducting properties with thermal annealing at moderate temperature. The DUV-induced crosslinking of the starting material allows direct write of semi-conducting channels in thin-film transistors but also it improves the field-effect mobility and surface roughness. Material analysis has been carried out by XPS, FTIR, spectroscopic ellipsometry and AFM and the effect of DUV on the final material structure is discussed. The DUV irradiation step results in photolysis and a partial condensation of the inorganic network that freezes the sol-gel layer in a homogeneous distribution, lowering possibilities of thermally induced reorganization at the atomic scale. Laser irradiation allows high-resolution photopatterning and high-enough field-effect mobility, which enables the easy fabrication of oxide nanowires for applications in solar cell, display, flexible electronics, and biomedical sensors

Nanostructuration par photolithographie DUV de matériaux organiques

L'objectif principal de ce travail de thèse a été de développer un montage de lithographie à 193 nm (Deep-UV, DUV), avec comme but d'obtenir des nanostructures de période l 00 nm sur des surfaces relativement importantes (cm2) dans différents matériaux organiques. Ainsi, une partie importante de cette thèse a consisté à mettre en place un interféromètre achromatique pour le DUV, ainsi que les méthodes d'analyse des échantillons aux différentes échelles. Le premier chapitre a pour but d'énoncer les enjeux et techniques de nanofabrication en comparant notamment les deux grandes approches dites top-down et bottom-up . Dans ce chapitre, une part importante est donnée aux techniques lithographiques dans lesquelles s'inscrit la technique utilisée ici. Le deuxième chapitre décrit les techniques utilisées, pour la nanofabrication (photolithographie interférentielle DUV) et les méthodes de caractérisation. Le troisième chapitre expose les résultats obtenus au sujet de résines positives, dites à amplification chimique , formulées à partir des nouveaux polymères, et destinées à des applications en microélectronique. Le quatrième chapitre décrit les résultats obtenus en photolithographie DUV de polymères déposés par voie plasma. Il se présente sous la forme d'une compilation de 4 articles précédés d'une introduction pour expliquer les enjeux de cette démarche.Enfin, le cinquième chapitre constitue une ouverture vers une nouvelle technique de nanofabrication qui s'appuie sur la photolithographie 193 nm. Il s'agit d'utiliser une approche hybride de nanofabrication qui repose sur l'auto organisation de films de copolymères dibloc dans des espaces nanoconfinés.The main objective of this thesis was to develop a montage of lithography at 193 nm (Deep UV, DUV), to obtain nanostructures with a period of 100 nm on large surfaces (cm2) in different organic materials. Thus, an important part of this thesis was to establish an achromatic interferometer for the DUV, as well as methods for analyzing samples at different scales.MULHOUSE-SCD Sciences (682242102) / SudocSudocFranceF