1,015 research outputs found
Missing data in spatiotemporal datasets: the UK rainfall chemistry network
Rainfall chemistry networks inevitably report some missing data, caused by contamination or loss of samples. However, there are no universally accepted rules about how such data, particularly from samples contaminated in the field, are identified and reported, leading to uncertainties in data usage by third parties, and possible incorrect inferences based on the reported data. This paper describes how the UK rainfall chemistry network data have been analysed for contamination, and how missing values can be estimated based on cross-correlations in time and space, using data from 20 sites over 26 years. The final flagged dataset is available through the CEH Environmental Information Data Centre (EIDC). Erroneous data values are identified through consideration of ion balance (internal consistency), and evidence of contamination by birds or windblown dust based on the reported chemical analysis. Overall data capture with the erroneous data excluded and no replacement of missing data was 86%, but with much smaller data capture at some sites in some years, to less than 30% in some cases. The use of estimated data to replace missing values resulted in an increase in overall data capture to 96%, with only one site having data capture less than 70% in an individual year, and all sites achieving a data capture of 88% or more over the full period. The implications of using the reported ‘official’ annual data, as opposed to the dataset with missing values replaced by estimates, are illustrated by consideration of the temporal trend in nitrate at one site, which shows twice the value in the ‘official’ reported annual data compared with the ‘estimated’ data, part of a consistent pattern across all sites. Use of the uncorrected ‘raw’ sample data leads to large errors
Lubricant degradation, transport and the effect of extended oil drain intervals on piston assembly tribology
There are ever increasing demands on lubricant manufacturers to meet governmental legislation and customer needs by improving fuel economy, engine durability and exhaust system compatibility as shown by the introduction of GF4 and move towards GF5 specification oils. This has created an ever increasing need to understand how oil degrades in an engine and how this degraded oil affects piston assembly tribology. This review conference paper will give an overview of a collaborative project that has been undertaken to further enhance the understanding of how lubricant degrades in an operating engine, its transport through the engine and effect upon piston assembly tribology
Extraction and tribological investigation of top piston ring zone oil from a gasoline engine
With tightening emission regulations, increased expected fuel economy, and longer drain intervals impacting on lubricant formulation, greater understanding of how oil degrades in an automotive engine is becoming ever more important. Equally significant is the effect that this degraded lubricant has on the tribological operation of the engine, particularly its overall internal friction and component wear. In a previous paper, four tests to degrade oil in a single cylinder engine were reported [1]. These tests were set up such that the lubricating oil was degraded in the ring pack before returning to the sump, where it was sampled and chemical and rheological analysis undertaken. This paper reports the extension of this work using the same Hydra engine and describes how oil has additionally been extracted from the rear of the top piston ring during engine operation. This extracted oil has then been subjected to similar analysis as the sump oil samples in the previous tests, along with additional analysis to look at the tribological properties of the oil using tribometers. The results clearly show significant differences in the rheological, tribological, and chemical properties of the fresh oil and used sump oil samples when compared with the top ring zone (TRZ) oil samples, particularly the effect of load on the levels of volatiles present in the TRZ samples and their effect on traction and friction coefficient values during tribological testing
Are we teaching our students what they need to know about ageing? Results from the National Survey of Undergraduate Teaching in Ageing and Geriatric Medicine
Introduction - Learning about ageing and the appropriate management of older patients is important for all doctors. This survey set out to evaluate what medical undergraduates in the UK are taught about ageing and geriatric medicine and how this teaching is delivered.
Methods – An electronic questionnaire was developed and sent to the 28/31 UK medical schools which agreed to participate.
Results – Full responses were received from 17 schools. 8/21 learning objectives were recorded as taught, and none were examined, across every school surveyed. Elder abuse and terminology and classification of health were taught in only 8/17 and 2/17 schools respectively. Pressure ulcers were taught about in 14/17 schools but taught formally in only 7 of these and examined in only 9. With regard to bio- and socio- gerontology, only 9/17 schools reported teaching in social ageing, 7/17 in cellular ageing and 9/17 in the physiology of ageing.
Discussion – Even allowing for the suboptimal response rate, this study presents significant cause for concern with UK undergraduate education related to ageing. The failure to teach comprehensively on elder abuse and pressure sores, in particular, may be significantly to the detriment of older patients
Long-term trends in rain and cloud chemistry in a region of complex topography
Rain and cloud water from a high-elevation site and an adjacent lower-level site in the northern Pennines of England were sampled and analysed between 1994 and 2008. The comparison of wet deposition and rainfall depth at the high and low-level sites has been used to estimate the additional deposition of pollutants arising from ‘seeder–feeder’ enhancement by washout of the orographic cap cloud that forms over the high-level site. The derived ‘orographic scavenging ratio’ for different ions is used to map the orographic enhancement of wet deposition across the U.K. The ratio of ion concentrations in cloud and in rain at the high-level site is also important for estimating the input of pollutants through the direct capture of cloud water droplets at high elevation sites.
Long-term trends in ion concentrations in cloud and rain showed significant downward trends in non-sea sulphate, and a weaker downward trend in nitrate, but no trend in other ions. There was also no trend in the orographic scavenging ratios, implying that the methods used to estimate orographic enhancement across the U.K. are robust over time
Supporting 'design for reuse' with modular design
Engineering design reuse refers to the utilization of any knowledge gained from the design activity to support future design. As such, engineering design reuse approaches are concerned with the support, exploration, and enhancement of design knowledge prior, during, and after a design activity. Modular design is a product structuring principle whereby products are developed with distinct modules for rapid product development, efficient upgrades, and possible reuse (of the physical modules). The benefits of modular design center on a greater capacity for structuring component parts to better manage the relation between market requirements and the designed product. This study explores the capabilities of modular design principles to provide improved support for the engineering design reuse concept. The correlations between modular design and 'reuse' are highlighted, with the aim of identifying its potential to aid the little-supported process of design for reuse. In fulfilment of this objective the authors not only identify the requirements of design for reuse, but also propose how modular design principles can be extended to support design for reuse
Recommended from our members
Revised analyses of decommissioning for the reference boiling water reactor power station. Effects of current regulatory and other considerations on the financial assurance requirements of the decommissioning rule and on estimates of occupational radiation exposure: Main report, draft report for comment. Volume 1
On June 27, 1988, the U.S. Nuclear Regulatory Commission (NRC) published in the Federal Register (53 FR 24018) the final rule for the General Requirements for Decommissioning Nuclear Facilities. With the issuance of the final rule, owners and operators of licensed nuclear power plants are required to prepare, and submit to the NRC for review, decommissioning plans and cost estimates. The NRC staff is in need of updated bases documentation that will assist them in assessing the adequacy of the licensee submittals, from the viewpoint of both the planned actions, including occupational radiation exposure, and the probable costs. The purpose of this reevaluation study is to update the needed bases documentation. This report presents the results of a review and reevaluation of the PNL 1980 decommissioning study of the Washington Public Power Supply System`s Washington Nuclear Plant Two (WNP-2), including all identifiable factors and cost assumptions which contribute significantly to the total cost of decommissioning the plant for the DECON, SAFSTOR, and ENTOMB alternatives, which now include an initial 5-7 year period during which time the spent fuel is stored in the spent fuel pool prior to beginning major disassembly or extended safe storage of the plant. This report also includes consideration of the NRC requirement that decontamination and decommissioning activities leading to termination of the nuclear license be completed within 60 years of final reactor shutdown, consideration of packaging and disposal requirements for materials whose radionuclide concentrations exceed the limits for Class C low-level waste. Costs for labor, transport, and disposal activities are given in 1993 dollars. Sensitivities of the total license termination cost to the disposal costs at different low-level radioactive waste disposal sites, to different depths of contaminated concrete surface removal within the facilities, and to different transport distances are also examined
A collaborative platform for integrating and optimising Computational Fluid Dynamics analysis requests
A Virtual Integration Platform (VIP) is described which provides support for the integration of Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) analysis tools into an environment that supports the use of these tools in a distributed collaborative manner. The VIP has evolved through previous EU research conducted within the VRShips-ROPAX 2000 (VRShips) project and the current version discussed here was developed predominantly within the VIRTUE project but also within the SAFEDOR project. The VIP is described with respect to the support it provides to designers and analysts in coordinating and optimising CFD analysis requests. Two case studies are provided that illustrate the application of the VIP within HSVA: the use of a panel code for the evaluation of geometry variations in order to improve propeller efficiency; and, the use of a dedicated maritime RANS code (FreSCo) to improve the wake distribution for the VIRTUE tanker. A discussion is included detailing the background, application and results from the use of the VIP within these two case studies as well as how the platform was of benefit during the development and a consideration of how it can benefit HSVA in the future
Soft-mode anisotropy in the negative thermal expansion material ReO3
We use a symmetry-motivated approach to analyse neutron pair distribution function data to investigate the character of the soft phonon modes in negative thermal expansion (NTE) material ReO3. This analysis shows that its local structure is dominated by an in-phase octahedral tilting mode and that the octahedral units are far less flexible to scissoring type deformations than in the related NTE compound ScF3. The lack of flexibility in ReO3 restricts the NTE-driving phonons to a smaller region of reciprocal space, limiting the magnitude and temperature range of NTE. These results support the idea that structural flexibility is an important factor in NTE materials. Surprisingly, our results show that the local fluctuations, even at elevated temperatures, respect the symmetry and order parameter direction of the initial pressure induced phase transition in ReO3. The result indicates that the dynamic motions associated with rigid unit modes are highly anisotropic in these systems
- …