Hyper Market Industry in Dubai – An Evaluation Using AHP Technique

Among all retail formats hypermarket is growing very fast in UAE that is at the rate of 150 percent.The major players in this sector are Carrefour, Spinney’s, United, Choithram and Lulu.The focus of the problem is selecting a best hypermarket among the existing operators of Dubai andfor which we used seven major criteria for evaluating the hypermarkets such as product availabilityand variety, market coverage, channel density, customer density, nationality served, facilities andservices and customer spending pattern. We used Analytic hierarchy process (AHP), developed byThomas saaty (1980) to provide a simple but theoretically sound multiple criteria methodology forevaluating the alternatives

Granular anchors for stabilising slopes

A series of small-scale tests was undertaken to verify if granular anchors could be used as a slope stabilisation technique. The nature of the material used and the resulting loading configuration are described here. The work confirms that the inclusion of anchors within a slope mass, irrespective of their number or orientation, significantly enhances the capacity and ductility of the failure mode. The small-scale nature of this research did influence the observed capacities, but the overarching hypothesis was confirmed. A simple analysis method is proposed that allows designers to accurately remediate natural or man-made slopes using existing analytical methods for slope stability

Optimization of electrocoagulation process to treat biologically pretreated bagasse effluent

The main objective of the present study was to investigate the efficiency of electrocoagulation process as a post-treatment to treat biologically pretreated bagasse effluent using iron electrodes. The removal of chemical oxygen demand (COD) and total suspended solids (TSS) were studied under different operating conditions such as amount of dilution, initial pH, applied current and electrolyte dose by using response surface methodology (RSM) coupled with four-factor three-level Box-Behnken experimental design (BBD). The experimental results were analyzed by Pareto analysis of variance (ANOVA) and second order polynomial mathematical models were developed with high correlation of efficiency (R2) for COD, TSS removal and electrical energy consumption (EEC). The individual and combined effect of variables on responses was studied using three dimensional response surface plots. Under the optimum operating conditions, such as amount of dilution at 30 %, initial pH of 6.5, applied current of 8 mA cm-2 and electrolyte dose of 740 mg l-1 shows the higher removal efficiency of COD (98 %) and TSS (93 %) with EEC of 2.40 Wh, which were confirmed by validation experiments

Wetting of compacted clays under laterally restrained conditions:initial state, overburden pressure and mineralogy

International audienceCompacted clay fills are generally placed at the optimum value of water content and, immediately after placement, they are unsaturated. Wetting might subsequently occur due, for example, to rainfall infiltration, which can cause volumetric deformation of the fill (either swell or collapse) with associated loss of shear strength and structural integrity. If swelling takes place under partially restrained deformation, due for example to the presence of a buried rigid structure or a retaining wall, additional stresses will develop in the soil and these can be detrimental to the stability of walling elements and other building assets. Factors such as dry density, overburden pressure, compaction water content and type of clay are known to influence the development of stresses. This paper investigates these factors by means of an advanced stress path testing programme performed on four different clays with different mineralogy, index properties and geological histories. Specimens of kaolin clay, London Clay, Belfast Clay and Ampthill Clay were prepared at different initial states and subjected to `controlled' wetting, whereby the suction was reduced gradually to zero under laterally restrained conditions (i.e. K0 conditions). The results showed that the magnitude of the increase in horizontal stresses (and therefore the increase of K0) is influenced by the overburden pressure, compaction water content, dry density at the time of compaction and mineralogy

Methyl 6-(4-chloro­phen­yl)-2,4-dimethyl-1,3-dioxo-1,2,3,4,6,6a,7,12b-octa­hydro­chromeno[4′,3′:4,5]pyrano[2,3-d]pyrimidine-6a-carboxyl­ate

In the title compound, C24H21ClN2O6, the two fused six-membered pyran rings adopt half-chair conformations. The dihedral angle between the pyrimidine ring and the chloro­phenyl ring is 51.55 (3)°. In the crystal, mol­ecules are linked by pairs of weak inter­molecular C—H⋯O hydrogen bonds, forming inversion dimers. A C—H⋯π inter­action is also observed

An improved experimental test set-up to study the performance of granular columns

This paper describes an innovative design of a newly developed large test setup for testing the performance of footings supported on soft clay reinforced with granular columns. This advanced testing method is used to examine the settlement of footings supported on granular columns. Two important features of the equipment are (a) the axial loading system which allows samples to be consolidated under Ko condition while the load is applied onto a small foundation area of the sample, and (b) a relatively large sample size of 300-mm diameter and 400-mm high. The system is also equipped with pressure cells located beneath the footing and top cap to measure the pressure distribution with respect to foundation displacement and a lateral strain gage to monitor boundary effects. This paper reports on some of the early findings from the preliminary tests carried out using this equipment. Samples for testing were prepared by consolidating kaolin slurry in a large one-dimensional consolidation chamber. The granular columns were installed using the replacement method by compacting crushed basalt (uniformly graded with 90 % between 1.5–2-mm particle sizes) into a preformed hole. The preliminary tests have yielded promising results, validating the functionality of the equipment and support the prospect of increasing the knowledge with respect to settlement response and design of a footing supported on granular columns

Photon-added coherent states as nonlinear coherent states

The states $|\alpha,m>$, defined as ${a^{\dagger}}^{m}|\alpha>$ up to a normalization constant and $m$ is a nonnegative integer, are shown to be the eigenstates of $f(\hat{n},m)\hat{a}$ where $f(\hat{n},m)$ is a nonlinear function of the number operator $\hat{n}$. The explicit form of $f(\hat{n},m)$ is constructed. The eigenstates of this operator for negative values of $m$ are introduced. The properties of these states are discussed and compared with those of the state $|\alpha,m >$.Comment: Rev Tex file with two figures as postscript files attached. Email: [email protected]

Extracting Independent Local Oscillatory Geophysical Signals by Geodetic Tropospheric Delay

Zenith Tropospheric Delay (ZTD) due to water vapor derived from space geodetic techniques and numerical weather prediction simulated-reanalysis data exhibits non-linear and non-stationary properties akin to those in the crucial geophysical signals of interest to the research community. These time series, once decomposed into additive (and stochastic) components, have information about the long term global change (the trend) and other interpretable (quasi-) periodic components such as seasonal cycles and noise. Such stochastic component(s) could be a function that exhibits at most one extremum within a data span or a monotonic function within a certain temporal span. In this contribution, we examine the use of the combined Ensemble Empirical Mode Decomposition (EEMD) and Independent Component Analysis (ICA): the EEMD-ICA algorithm to extract the independent local oscillatory stochastic components in the tropospheric delay derived from the European Centre for Medium-Range Weather Forecasts (ECMWF) over six geodetic sites (HartRAO, Hobart26, Wettzell, Gilcreek, Westford, and Tsukub32). The proposed methodology allows independent geophysical processes to be extracted and assessed. Analysis of the quality index of the Independent Components (ICs) derived for each cluster of local oscillatory components (also called the Intrinsic Mode Functions (IMFs)) for all the geodetic stations considered in the study demonstrate that they are strongly site dependent. Such strong dependency seems to suggest that the localized geophysical signals embedded in the ZTD over the geodetic sites are not correlated. Further, from the viewpoint of non-linear dynamical systems, four geophysical signals the Quasi-Biennial Oscillation (QBO) index derived from the NCEP/NCAR reanalysis, the Southern Oscillation Index (SOI) anomaly from NCEP, the SIDC monthly Sun Spot Number (SSN), and the Length of Day (LoD) are linked to the extracted signal components from ZTD. Results from the synchronization analysis show that ZTD and the geophysical signals exhibit (albeit subtle) site dependent phase synchronization index

Global temperature estimates in the troposphere and stratosphere: a validation study of COSMIC/FORMOSAT-3 measurements

This paper mainly focuses on the validation of temperature estimates derived with the newly launched Constellation Observing System for Meteorology Ionosphere and Climate (COSMIC)/Formosa Satellite 3 (FORMOSAT-3) system. The analysis is based on the radio occultation (RO) data samples collected during the first year observation from April 2006 to April 2007. For the validation, we have used the operational stratospheric analyses including the National Centers for Environmental Prediction - Reanalysis (NCEP), the Japanese 25-year Reanalysis (JRA-25), and the United Kingdom Met Office (MetO) data sets. Comparisons done in different formats reveal good agreement between the COSMIC and reanalysis outputs. Spatially, the largest deviations are noted in the polar latitudes, and height-wise, the tropical tropopause region noted the maximum differences (2–4 K). We found that among the three reanalysis data sets the NCEP data sets have the best resemblance with the COSMIC measurements

Interpolating Coherent States for Heisenberg-Weyl and Single-Photon SU(1,1) Algebras

New quantal states which interpolate between the coherent states of the Heisenberg_Weyl and SU(1,1) algebras are introduced. The interpolating states are obtained as the coherent states of a closed and symmetric algebra which interpolates between the two algebras. The overcompleteness of the interpolating coherent states is established. Differential operator representations in suitable spaces of entire functions are given for the generators of the algebra. A nonsymmetric set of operators to realize the Heisenberg-Weyl algebra is provided and the relevant coherent states are studied.Comment: 13 pages nd 5 ps figure