The effects of shoe temperature on the kinetics and kinematics of running

The aim of the current investigation was to examine the effects of cooled footwear on the kinetics and kinematics of running in comparison to footwear at normal temperature. Twelve participants ran at 4.0 m/s ± 5% in both cooled and normal temperature footwear conditions over a force platform. Two identical footwear were worn, one of which was cooled for 30 min. Lower extremity kinematics were obtained using a motion capture system and tibial accelerations were measured using a triaxial accelerometer. Differences between cooled and normal footwear temperatures were contrasted using paired samples t-tests. The results showed that midsole temperature (cooled = 4.21 °C and normal = 23.25 °C) and maximal midsole deformation during stance (cooled = 12.85 mm and normal = 14.52 mm) were significantly reduced in the cooled footwear. In addition, instantaneous loading rate (cooled = 186.21 B.W/s and normal = 167.08 B W/s), peak tibial acceleration (cooled = 12.75 g and normal = 10.70 g) and tibial acceleration slope (cooled = 478.69 g/s and normal = 327.48 g/s) were significantly greater in the cooled footwear. Finally, peak eversion (cooled = −10.57 ° and normal = −7.83°) and tibial internal rotation (cooled = 10.67 ° and normal = 7.77°) were also shown to be significantly larger in the cooled footwear condition. This study indicates that running in cooled footwear may place runners at increased risk from the biomechanical parameters linked to the aetiology of injuries

Quantization and simulation of Born-Infeld non-linear electrodynamics on a lattice

Born-Infeld non-linear electrodynamics arises naturally as a field theory description of the dynamics of strings and branes. Most analyses of this theory have been limited to studying it as a classical field theory. We quantize this theory on a Euclidean 4-dimensional space-time lattice and determine its properties using Monte-Carlo simulations. The electromagnetic field around a static point charge is measured using Luscher-Weisz methods to overcome the sign problem associated with the introduction of this charge. The D field appears identical to that of Maxwell QED. However, the E field is enhanced by quantum fluctuations, while still showing the short distance screening observed in the classical theory. In addition, whereas for the classical theory, the screening increases without bound as the non-linearity increases, the quantum theory approaches a limiting conformal field theory.Comment: 24 pages, 10 figures. Latex with postscript figure

Cut loci and conjugate loci on Liouville surfaces

In the earlier paper (Itoh and Kiyohara, Manuscr Math 114:247–264, 2004), we showed that the cut locus of a general point on two-dimensional ellipsoid is a segment of a curvature line and proved "Jacobi’s last geometric statement" on the singularities of the conjugate locus. In the present paper,we showthat a wider class of Liouville surfaces possess such simple cut loci and conjugate loci. The results include the determination of cut loci and the set of poles on two-sheeted hyperboloids and elliptic paraboloids

An Australia telescope survey for CMB anisotropies

We have surveyed six distinct `empty fields' using the Australia Telescope Compact Array in an ultra-compact configuration with the aim of imaging, with a high brightness sensitivity, any arcmin-scale brightness-temperature anisotropies in the background radio sky. The six well-separated regions were observed at a frequency of 8.7 GHz and the survey regions were limited by the ATCA primary beams which have a full width at half maximum of 6 arcmin at this frequency; all fields were observed with a resolution of 2 arcmin and an rms thermal noise of 24 microJy/beam. After subtracting foreground confusion detected in higher resolution images of the fields, residual fluctuations in Stokes I images are consistent with the expectations from thermal noise and weaker (unidentified) foreground sources; the Stokes Q and U images are consistent with expectations from thermal noise. Within the sensitivity of our observations, we have no reason to believe that there are any Sunyaev-Zeldovich holes in the microwave sky surveyed. Assuming Gaussian-form CMB anisotropy with a `flat' spectrum, we derive 95 per cent confidence upper limits of Q_flat < 10--11 microK in polarized intensity and Q_flat < 25 microK in total intensity. The ATCA filter function peaks at l=4700 and has half maximum values at l=3350 and 6050.Comment: 17 pages, includes 8 figures and 6 tables, accepted for publication in MNRA

Ultra-dense magnetoresistive mass memory

This report details the progress and accomplishments of Nonvolatile Electronics (NVE), Inc., on the design of the wafer scale MRAM mass memory system during the fifth quarter of the project. NVE has made significant progress this quarter on the one megabit design in several different areas. A test chip, which will verify a working GMR bit with the dimensions required by the 1 Meg chip, has been designed, laid out, and is currently being processed in the NVE labs. This test chip will allow electrical specifications, tolerances, and processing issues to be finalized before construction of the actual chip, thus providing a greater assurance of success of the final 1 Meg design. A model has been developed to accurately simulate the parasitic effects of unselected sense lines. This model gives NVE the ability to perform accurate simulations of the array electronic and test different design concepts. Much of the circuit design for the 1 Meg chip has been completed and simulated and these designs are included. Progress has been made in the wafer scale design area to verify the reliable operation of the 16 K macrocell. This is currently being accomplished with the design and construction of two stand alone test systems which will perform life tests and gather data on reliabiliy and wearout mechanisms for analysis

Rapidity Gaps Between Jets

An excess of events with a rapidity gap between jets, over what would be expected from non-diffractive processes, has been observed at HERA. A process based on a perturbative QCD calculation of colour singlet exchange has been added to HERWIG. With this addition, HERWIG is able to describe the number of events with a gap between jets over the number without a gap. This gap fraction is predicted to rise at large rapidity intervals between jets which would only be visible if the detector coverage were increased.Comment: 5 pages including 3 figures. To appear in the conference proceedings of the Workshop "Future Physics at HERA

3-D kinematic comparison of treadmill and overground running.

Studies investigating the mechanics of human movement are often conducted using the treadmill. The treadmill is an attractive device for the analysis of human locomotion. Studies comparing overground and treadmill running have analyzed discrete variables, however differences in excursion from footstrike to peak angle and range of motion during stance have yet to be examined. This study aimed to examine the 3-D kinematics of the lower extremities during overground and treadmill locomotion to determine the extent to which the two modalities differ. Twelve participants ran at 4.0m/s in both treadmill and overground conditions. 3-D angular kinematic parameters during the stance phase were collected using an eight camera motion analysis system. Hip, knee and ankle joint kinematics were quantified in the sagittal, coronal and transverse planes, then compared using paired t-tests. Of the parameters analyzed hip flexion at footstrike 12° hip range of motion 17°, peak hip flexion 12.7°, hip transverse plane range of motion 8° peak knee flexion 5° and peak ankle excursion range 6.6°, coronal plane ankle angle at toe-off 6.5° and peak ankle eversion 6.3° were found to be significantly different. These results lead to the conclusion that the mechanics of treadmill locomotion cannot be generalized to overground

Evidence for O(2) universality at the finite temperature transition for lattice QCD with 2 flavours of massless staggered quarks

We simulate lattice QCD with 2 flavours of massless quarks on lattices of temporal extent N_t=8, to study the finite temperature transition from hadronic matter to a quark-gluon plasma. A modified action which incorporates an irrelevant chiral 4-fermion interaction is used, which allows simulations at zero quark mass. We obtain excellent fits of the chiral condensates to the magnetizations of a 3-dimensional O(2) spin model on lattices small enough to model the finite size effects. This gives predictions for correlation lengths and chiral susceptibilities from the corresponding spin-model quantities. These are in good agreement with our measurements over the relevant range of parameters. Binder cumulants are measured, but the errors are too large to draw definite conclusions. From the properties of the O(2) spin model on the relatively small lattices with which we fit our `data', we can see why earlier attempts to fit staggered lattice data to leading-order infinite-volume scaling functions, as well as finite size scaling studies, failed and led to erroneous conclusions.Comment: 27 pages, Latex with 10 postscript figures. Some of the discussions have been expanded to satisfy a referee. Typographical errors were correcte

Suggestions for developing a reliable evidence base for the efficacy of dimensions of learning implementations

This paper advocates the development of an empirical evidence base to guide and enhance Dimensions of Learning (DoL) implementations. The discussion is two-fold. The American research evidence base supporting DoL is outlined and categorized in relation to specific Dimensions. The paper then discusses two approaches to how extant data might be used to shed light on the efficacy of DoL implementations in this country. The paper argues that using these approaches will enable the development of a situated, empirical evidence base reliable enough to guide and enhance DoL implementations in Australia.<br /

S-band omnidirectional antenna for the SERT-C satellite

The program to design an S-band omnidirectional antenna system for the SERT-C spacecraft is discussed. The program involved the tasks of antenna analyses by computer techniques, scale model radiation pattern measurements of a number of antenna systems, full-scale RF measurements, and the recommended design, including detailed drawings. A number of antenna elements were considered: the cavity-backed spiral, quadrifilar helix, and crossed-dipoles were chosen for in-depth studies. The final design consisted of a two-element array of cavity-backed spirals mounted on opposite sides of spacecraft and fed in-phase through a hybrid junction. This antenna system meets the coverage requirement of having a gain of at least minus 10 dBi over 50 percent of a 4 pi steradian sphere with the solar panels in operation. This coverage level is increased if the ground station has the capability to change polarization