Review and assessment of the database and numerical modeling for turbine heat transfer

The objectives of the NASA Hot Section Technology (HOST) Turbine Heat Transfer subproject were to obtain a better understanding of the physics of the aerothermodynamic phenomena and to assess and improve the analytical methods used to predict the flow and heat transfer in high-temperature gas turbines. At the time the HOST project was initiated, an across-the-board improvement in turbine design technology was needed. A building-block approach was utilized and the research ranged from the study of fundamental phenomena and modeling to experiments in simulated real engine environments. Experimental research accounted for approximately 75 percent of the funding while the analytical efforts were approximately 25 percent. A healthy government/industry/university partnership, with industry providing almost half of the research, was created to advance the turbine heat transfer design technology base

Program Notes For Graduate Recital

AN ABSTRACT OF THE RESEARCH PAPER OF Abigail Simoneau, for the Masters of Music degree in MUSIC PERFORMANCE, presented on April 12, 2013, at Southern Illinois University Carbondale. TITLE: PROGRAM NOTES FOR GRADUATE RECITAL MAJOR PROFESSOR: Dr. Douglas Worthen The objective of this research paper is to provide scholarly program notes to accompany the Graduate Recital of Abigail Simoneau, which took place on April 19, 2013. Program notes for Jean-Daniel Braun’s Suite in e minor (1740), Wolfgang Amadeus Mozart’s Sonata in C major, K. 14 (1764), Frank Martin’s Ballade for Flute and Piano (1939), Sergei Prokofiev’s Sonata in D major, Op. 94 (1942), Luciano Berio’s Sequenza (1958), and Steve Reich’s Vermont Counterpoint (1982) are provided

Biomechanical Effects of Mobile Computer Location in a Vehicle Cab

Objective: The objective of this research is to determine the best location to place a conventional mobile computer supported by a commercially available mount in a light truck cab. Background: U.S. and Canadian electric utility companies are in the process of integrating mobile computers into their fleet vehicle cabs. There are no publications on the effect of mobile computer location in a vehicle cab on biomechanical loading, performance, and subjective assessment. Method: The authors tested four locations of mobile computers in a light truck cab in a laboratory study to determine how location affected muscle activity of the lower back and shoulders; joint angles of the shoulders, elbows, and wrist; user performance; and subjective assessment. A total of 22 participants were tested in this study. Results: Placing the mobile computer closer to the steering wheel reduced low back and shoulder muscle activity. Joint angles of the shoulders, elbows, and wrists were also closer to neutral angle. Biomechanical modeling revealed substantially less spinal compression and trunk muscle force. In general, there were no practical differences in performance between the locations. Subjective assessment indicated that users preferred the mobile computer to be as close as possible to the steering wheel. Conclusion: Locating the mobile computer close to the steering wheel reduces risk of injuries, such as low back pain and shoulder tendonitis. Application: Results from the study can guide electric utility companies in the installation of mobile computers into vehicle cabs. Results may also be generalized to other industries that use trucklike vehicles, such as construction

Luening’s invention in twelve tones: transcription and max patch for performance by the contemporary flutist

The purpose of this project was to provide a transcription and Max patch for Otto Luening’s Invention in Twelve Tones. Composed in 1952, Invention in Twelve Tones was presented at the first public concert of electroacoustic music in the United States at the Museum of Modern Art in New York. Luening’s original work was prerecorded without a score, and he presented the premiere to the audience via audiotape. The transcription and Max patch are used in conjunction for performance of Invention of Twelve Tones. This project serves to make Invention in Twelve Tones accessible for live performance by a trio of flutists on piccolo, C flute, and bass flute. Included in this dissertation is information about Otto Luening, a Max patch to be used in performance, a performance guide to set up the patch, and a printed transcription of Invention in Twelve Tones. Background information for the project was collected primarily through readings on Otto Luening, the history of electroacoustic music, and study of the original manuscript and subsequent recordings

Multi-scale simulation of the nano-metric cutting process

Molecular dynamics (MD) simulation and the finite element (FE) method are two popular numerical techniques for the simulation of machining processes. The two methods have their own strengths and limitations. MD simulation can cover the phenomena occurring at nano-metric scale but is limited by the computational cost and capacity, whilst the FE method is suitable for modelling meso- to macro-scale machining and for simulating macro-parameters, such as the temperature in a cutting zone, the stress/strain distribution and cutting forces, etc. With the successful application of multi-scale simulations in many research fields, the application of simulation to the machining processes is emerging, particularly in relation to machined surface generation and integrity formation, i.e. the machined surface roughness, residual stress, micro-hardness, microstructure and fatigue. Based on the quasi-continuum (QC) method, the multi-scale simulation of nano-metric cutting has been proposed. Cutting simulations are performed on single-crystal aluminium to investigate the chip formation, generation and propagation of the material dislocation during the cutting process. In addition, the effect of the tool rake angle on the cutting force and internal stress under the workpiece surface is investigated: The cutting force and internal stress in the workpiece material decrease with the increase of the rake angle. Finally, to ease multi-scale modelling and its simulation steps and to increase their speed, a computationally efficient MATLAB-based programme has been developed, which facilitates the geometrical modelling of cutting, the simulation conditions, the implementation of simulation and the analysis of results within a unified integrated virtual-simulation environment

Red-flag symptom clusters in transthyretin familial amyloid polyneuropathy

© 2015 The Authors. Journal of the Peripheral Nervous System published by Wiley Periodicals, Inc. on behalf of Peripheral Nerve Society. This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.Transthyretin familial amyloid polyneuropathy (TTR-FAP) is a rare, progressive, life-threatening, hereditary disorder caused by mutations in the transthyretin gene and characterized by extracellular deposition of transthyretin-derived amyloid fibrils in peripheral and autonomic nerves, heart, and other organs. TTR-FAP is frequently diagnosed late because the disease is difficult to recognize due to phenotypic heterogeneity. Based on published literature and expert opinion, symptom clusters suggesting TTR-FAP are reviewed, and practical guidance to facilitate earlier diagnosis is provided. TTR-FAP should be suspected if progressive peripheral sensory-motor neuropathy is observed in combination with one or more of the following: family history of a neuropathy, autonomic dysfunction, cardiac hypertrophy, gastrointestinal problems, inexplicable weight loss, carpal tunnel syndrome, renal impairment, or ocular involvement. If TTR-FAP is suspected, transthyretin genotyping, confirmation of amyloid in tissue biopsy, large- and small-fiber assessment by nerve conduction studies and autonomic system evaluations, and cardiac testing should be performed.info:eu-repo/semantics/publishedVersio

Quality and Safety Aspects of Infant Nutrition

Quality and safety aspects of infant nutrition are of key importance for child health, but oftentimes they do not get much attention by health care professionals whose interest tends to focus on functional benefits of early nutrition. Unbalanced diets and harmful food components induce particularly high risks for untoward effects in infants because of their rapid growth, high nutrient needs, and their typical dependence on only one or few foods during the first months of life. The concepts, standards and practices that relate to infant food quality and safety were discussed at a scientific workshop organized by the Child Health Foundation and the Early Nutrition Academy jointly with the European Society for Paediatric Gastroenterology, Hepatology and Nutrition, and a summary is provided here. The participants reviewed past and current issues on quality and safety, the role of different stakeholders, and recommendations to avert future issues. It was concluded that a high level of quality and safety is currently achieved, but this is no reason for complacency. The food industry carries the primary responsibility for the safety and suitability of their products, including the quality of composition, raw materials and production processes. Introduction of new or modified products should be preceded by a thorough science based review of suitability and safety by an independent authority. Food safety events should be managed on an international basis. Global collaboration of food producers, food-safety authorities, paediatricians and scientists is needed to efficiently exchange information and to best protect public health. Copyright (C) 2012 S. Karger AG, Base

Evidence for cognitive vestibular integration impairment in idiopathic scoliosis patients

<p>Abstract</p> <p>Background</p> <p>Adolescent idiopathic scoliosis is characterized by a three-dimensional deviation of the vertebral column and its etiopathogenesis is unknown. Various factors cause idiopathic scoliosis, and among these a prominent role has been attributed to the vestibular system. While the deficits in sensorimotor transformations have been documented in idiopathic scoliosis patients, little attention has been devoted to their capacity to integrate vestibular information for cognitive processing for space perception. Seated idiopathic scoliosis patients and control subjects experienced rotations of different directions and amplitudes in the dark and produced saccades that would reproduce their perceived spatial characteristics of the rotations (vestibular condition). We also controlled for possible alteration of the oculomotor and vestibular systems by measuring the subject's accuracy in producing saccades towards memorized peripheral targets in absence of body rotation and the gain of their vestibulo-ocular reflex.</p> <p>Results</p> <p>Compared to healthy controls, the idiopathic scoliosis patients underestimated the amplitude of their rotations. Moreover, the results revealed that idiopathic scoliosis patients produced accurate saccades to memorized peripheral targets in absence of body rotation and that their vestibulo-ocular reflex gain did not differ from that of control participants.</p> <p>Conclusion</p> <p>Overall, results of the present study demonstrate that idiopathic scoliosis patients have an alteration in cognitive integration of vestibular signals. It is possible that severe spine deformity developed partly due to impaired vestibular information travelling from the cerebellum to the vestibular cortical network or alteration in the cortical mechanisms processing the vestibular signals.</p

Staged hepatectomy for bilobar colorectal hepatic metastases

AbstractObjectivesThis study describes the management of patients with bilobar colorectal liver metastases (CRLM).MethodsA retrospective collection of data on all patients with CRLM who were considered for staged resection (n= 85) from January 2003 to January 2011 was performed. Patients who underwent one hepatic resection were considered to have had a failed staged resection (FSR), whereas those who underwent a second or third hepatic resection to produce a cure were considered to have had a successful staged resection (SSR). Survival was calculated from the date of diagnosis of liver metastases. Complete follow-up and dates of death were obtained from the Government of Quebec population database.ResultsMedian survival was 46months (range: 30–62months) in the SSR group and 22months (range: 19–29months) in the FSR group. Rates of 5-year survival were 42% and 4% in the SSR and FSR groups, respectively. Fifteen of the 19 patients who remained alive at the last follow-up date belonged to the SSR group.ConclusionsIn patients in whom staged resection for bilobar CRLM is feasible, surgery would appear to offer benefit