Liquid nitrogen fertilization on the yield and phenologic variables of narrow-row cotton

Slow-release liquid nitrogen fertilizer sources have been around since 1970. However, this technique is not widely used in the field, probably due to the low cost per ton of nitrogen in the solid form. This study aimed to evaluate the combination of the conventional and slow-release nitrogen fertilization on the yield and phenological variables in a narrow-row cotton crop. Treatments consisted of the combination of the nitrogen fertilizer applied as topdressing in solid form (via soil) and pulverized in the liquid form (via urea formaldehyde - UF): 0% of solid N + 0% of liquid N (0S0L); 100% of solid N + 0% of liquid N (100S0L); 75% of solid N + 25% of liquid N (75S25L); 50% of solid N + 50% of liquid N (50S50L); 25% of solid N + 75% of liquid N (25S75L); e 0% of solid N + 100% of liquid N (0S100L). The cotton crop was phenotypically evaluated at 35, 70, and 130 DAE (Days after emergence) and at the harvest time. The variation between the source of the solid nitrogen fertilizer applied to the soil (ammonium nitrate) and the liquid Nitrogen fertilizer applied by spraying (UF) affects the phenology, physiology, and yield components of the narrow-row cotton crop. The highest yield of the narrow-row cotton crop under the experimental conditions was achieved when 25% of the dose of the solid nitrogen fertilizer was applied as topdressing via soil, and 75% of the dose of the slow-release nitrogen fertilizer was sprayed. This technique provides higher profitability of the produced cotton in relation to the conventional application of the N solid fertilizer via soil

Forms of nitrogen fertilizer application in Panicum maximum

Nitrogen is one of the most important nutrients for increasing the yield and quality of forages. This study aimed to evaluate the effect of the different forms of application, spread on the total area using urea fertilizer and foliar using liquid urea, aiming at evaluating the yield and qualitative traits of Panicum maximum cv. Mombaça, at different times of the year. The experimental design was completely randomized blocks in subdivided plots, with three blocks, four treatments, and three collections. The treatments were applied in March 2015 and consisted of the following treatments: 1-control; 2-urea; 3-liquid urea; 4-urea + liquid urea; 5-urea + micronutrients; 6-urea + N liquid; 7-urea + N liquid + micronutrients; 8-control. Samples were collected in May, October, and December 2015. Crude protein (CP) dry matter (DM), mineral matter (MM), and acid detergent fiber (ADF) were evaluated. Results revealed that nitrogen was determinant in improving the yield and forage quality. Treatments with urea spread on total area resulted in increased dry matter production. For the crude protein, the source and the application form are not decisive. Collection time with higher rainfall positively affected the dry matter production, crude protein, and ADF, while urea spread on total area showed the best cost-benefit due to the good results of yield and quality

Características agronômicas e viabilidade econômica de híbridos de tomateiro irrigado e sob sequeiro

Objetivou-se com o presente trabalho selecionar o híbrido de tomate de mesa mais adaptado a região nordeste do Estado de Mato Grosso do Sul e comparar dois sistemas de cultivo, irrigado e sequeiro. Após levantamento dessas informações, foi realizada a análise econômica para constatação de viabilidade econômica. O experimento foi conduzido em esquema de parcelas subdivididas, tendo nas parcelas, dois sistemas de cultivo (irrigado e sequeiro) e nas subparcelas três híbridos de tomate (Siluet, Lumi e Silvetty), com quatro repetições, no delineamento em blocos casualisados. O tratamento irrigado foi por sistema de gotejamento. Os dados foram submetidos à análise de variância e o teste de médias foi pelo Tukey a 5% de probabilidade. A análise econômica da produção dos três híbridos e nos dois sistemas de cultivo estudados foi feita para áreas de 1 até 10 hectares. A irrigação proporcionou aumento nas produtividades comerciais dos híbridos Siluet e Lumi e na produtividade não comercial do Silvetty. A porcentagem de frutos comerciais do híbrido Silvetty foi maior no sistema em sequeiro. O tomate Siluet apresentou, no geral, desempenho menor em relação aos outros híbridos. A produção do tomate, independente se irrigado ou em sequeiro, apresentou viabilidade em Chapadão do Sul-MS. Concluiu-se que a irrigação, em geral, não proporciona efeito nas características agronômicas do tomateiro, na época chuvosa. Os tomates Lumi e Silvetty devem ser preferidos pelos produtores de tomate do nordeste de Mato Grosso do Sul, e quando esses híbridos são conduzidos em sequeiro, apresentam maior viabilidade econômica

Overview of the JET results

Since the installation of an ITER-like wall, the JET programme has focused on the consolidation of ITER design choices and the preparation for ITER operation, with a specific emphasis given to the bulk tungsten melt experiment, which has been crucial for the final decision on the material choice for the day-one tungsten divertor in ITER. Integrated scenarios have been progressed with the re-establishment of long-pulse, high-confinement H-modes by optimizing the magnetic configuration and the use of ICRH to avoid tungsten impurity accumulation. Stationary discharges with detached divertor conditions and small edge localized modes have been demonstrated by nitrogen seeding. The differences in confinement and pedestal behaviour before and after the ITER-like wall installation have been better characterized towards the development of high fusion yield scenarios in DT. Post-mortem analyses of the plasma-facing components have confirmed the previously reported low fuel retention obtained by gas balance and shown that the pattern of deposition within the divertor has changed significantly with respect to the JET carbon wall campaigns due to the absence of thermally activated chemical erosion of beryllium in contrast to carbon. Transport to remote areas is almost absent and two orders of magnitude less material is found in the divertor

The surgical safety checklist and patient outcomes after surgery: a prospective observational cohort study, systematic review and meta-analysis

© 2017 British Journal of Anaesthesia Background: The surgical safety checklist is widely used to improve the quality of perioperative care. However, clinicians continue to debate the clinical effectiveness of this tool. Methods: Prospective analysis of data from the International Surgical Outcomes Study (ISOS), an international observational study of elective in-patient surgery, accompanied by a systematic review and meta-analysis of published literature. The exposure was surgical safety checklist use. The primary outcome was in-hospital mortality and the secondary outcome was postoperative complications. In the ISOS cohort, a multivariable multi-level generalized linear model was used to test associations. To further contextualise these findings, we included the results from the ISOS cohort in a meta-analysis. Results are reported as odds ratios (OR) with 95% confidence intervals. Results: We included 44 814 patients from 497 hospitals in 27 countries in the ISOS analysis. There were 40 245 (89.8%) patients exposed to the checklist, whilst 7508 (16.8%) sustained ≥1 postoperative complications and 207 (0.5%) died before hospital discharge. Checklist exposure was associated with reduced mortality [odds ratio (OR) 0.49 (0.32–0.77); P\u3c0.01], but no difference in complication rates [OR 1.02 (0.88–1.19); P=0.75]. In a systematic review, we screened 3732 records and identified 11 eligible studies of 453 292 patients including the ISOS cohort. Checklist exposure was associated with both reduced postoperative mortality [OR 0.75 (0.62–0.92); P\u3c0.01; I2=87%] and reduced complication rates [OR 0.73 (0.61–0.88); P\u3c0.01; I2=89%). Conclusions: Patients exposed to a surgical safety checklist experience better postoperative outcomes, but this could simply reflect wider quality of care in hospitals where checklist use is routine

Critical care admission following elective surgery was not associated with survival benefit:prospective analysis of data from 27 countries

Purpose: As global initiatives increase patient access to surgical treatments, there is a need to define optimal levels of perioperative care. Our aim was to describe the relationship between the provision and use of critical care resources and postoperative mortality. Methods: Planned analysis of data collected during an international 7-day cohort study of adults undergoing elective in-patient surgery. We used risk-adjusted mixed-effects logistic regression models to evaluate the association between admission to critical care immediately after surgery and in-hospital mortality. We evaluated hospital-level associations between mortality and critical care admission immediately after surgery, critical care admission to treat life-threatening complications, and hospital provision of critical care beds. We evaluated the effect of national income using interaction tests. Results: 44,814 patients from 474 hospitals in 27 countries were available for analysis. Death was more frequent amongst patients admitted directly to critical care after surgery (critical care: 103/4317 patients [2%], standard ward: 99/39,566 patients [0.3%]; adjusted OR 3.01 [2.10–5.21]; p < 0.001). This association may differ with national income (high income countries OR 2.50 vs. low and middle income countries OR 4.68; p = 0.07). At hospital level, there was no association between mortality and critical care admission directly after surgery (p = 0.26), critical care admission to treat complications (p = 0.33), or provision of critical care beds (p = 0.70). Findings of the hospital-level analyses were not affected by national income status. A sensitivity analysis including only high-risk patients yielded similar findings. Conclusions: We did not identify any survival benefit from critical care admission following surgery