Staff eye lens dose in interventional radiology and cardiology in Finland

Purpose: The aim of this study was to investigate the eye lens and whole-body radiation doses to interventional radiology and cardiology staff in two Finnish hospitals. Methods: Simultaneous measurements of personal dose equivalent quantities H-p(3) and H-p(10) were conducted in clinical conditions during different radiological and cardiological interventional procedures. In order to study the feasibility to estimate eye lens dose with H-p(10) measured over the protective apron or thyroid shield, the ratio between measured H-p(3) and H-p(10) was investigated. Results and conclusions: Applying the obtained ratio on H-p(10) records from national dose register showed that only a small number of interventional radiologists and cardiologists in Finland may exceed eye lens equivalent dose levels of 20 mSv per year or 100 mSv in five consecutive years, but likely do not exceed 50 mSv in a single year. For the most Finnish interventionalists, the eye lens dose is well below 10 mSv per year. Nurses and radiographers assisting in interventions are, on average, less exposed than interventionalists, and will not exceed 20 mSv per year. Based on our results, H-p(10) measured over the protective apron or thyroid shield provides a conservative estimate of the eye lens dose for interventional radiologists and cardiologists, provided that appropriate protective glasses are used.Peer reviewe

Dental cone beam CT : An updated review

Cone beam computed tomography (CBCT) is a diverse 3D x-ray imaging technique that has gained significant popularity in dental radiology in the last two decades. CBCT overcomes the limitations of traditional twodimensional dental imaging and enables accurate depiction of multiplanar details of maxillofacial bony structures and surrounding soft tissues. In this review article, we provide an updated status on dental CBCT imaging and summarise the technical features of currently used CBCT scanner models, extending to recent developments in scanner technology, clinical aspects, and regulatory perspectives on dose optimisation, dosimetry, and diagnostic reference levels. We also consider the outlook of potential techniques along with issues that should be resolved in providing clinically more effective CBCT examinations that are optimised for the benefit of the patient.Peer reviewe

Actual and Potential Radiation Exposures in Digital Radiology : Analysis of Cumulative Data, Implications to Worker Classification and Occupational Exposure Monitoring

Radiation worker categorization and exposure monitoring are principal functions of occupational radiation safety. The aim of this study was to use the actual occupational exposure data in a large university hospital to estimate the frequency and magnitude of potential exposures in radiology. The additional aim was to propose a revised categorization and exposure monitoring practice based on the potential exposures. The cumulative probability distribution was calculated from the normalized integral of the probability density function fitted to the exposure data. Conformity of the probabilistic model was checked against 16 years of national monitoring data. The estimated probabilities to exceed annual effective dose limits of 1 mSv, 6 mSv and 20 mSv were 1:1000, 1:20 000 and 1:200 000, respectively. Thus, it is very unlikely that the class A categorization limit of 6 mSv could be exceeded, even in interventional procedures, with modern equipment and appropriate working methods. Therefore, all workers in diagnostic and interventional radiology could be systematically categorized into class B. Furthermore, current personal monitoring practice could be replaced by use of active personal dosemeters that offer more effective and flexible means to optimize working methods.Peer reviewe

Paikallista luomuruokaa kuluttajalle - ketjukokeiluja Etelä-Savossa

Toimittanut Sinikka Mynttine

Contemporary radiation doses in interventional cardiology: a nationwide study of patient doses in Finland

The amount of interventional procedures such as percutaneous coronary intervention (PCI), transcatheter aortic valve implantation (TAVI), pacemaker implantation (PI) and ablations has increased within the previous decade. Simultaneously, novel fluoroscopy mainframes enable lower radiation doses for patients and operators. Therefore, there is a need to update the existing diagnostic reference levels (DRLs) and propose new ones for common or recently introduced procedures. We sought to assess patient radiation doses in interventional cardiology in a large sample from seven hospitals across Finland between 2014 and 2016. Data were used to set updated national DRLs for coronary angiographies (kerma-air product (KAP) 30 Gycm2) and PCIs (KAP 75 cm2), and novel levels for PIs (KAP 3.5 Gycm2), atrial fibrillation ablation procedures (KAP 25 Gycm2) and TAVI (KAP 90 Gycm2). Tentative KAP values were set for implantations of cardiac resynchronization therapy devices (CRT, KAP 22 Gycm2), electrophysiological treatment of atrioventricular nodal re-entry tachycardia (6 Gycm2) and atrial flutter procedures (KAP 16 Gycm2). The values for TAVI and CRT device implantation are published for the first time on national level. Dose from image acquisition (cine) constitutes the major part of the total dose in coronary and atrial fibrillation ablation procedures. For TAVI, patient weight is a good predictor of patient dose.</p

Potential occupational exposures in diagnostic and interventional radiology : statistical modeling based on Finnish national dose registry data

Background Radiation worker categorization and exposure monitoring practices must be proportional to the current working environment. Purpose To analyze exposure data of Finnish radiological workers and to estimate the magnitude and frequency of their potential occupational radiation exposure, and to propose appropriate radiation worker categorization. Material and Methods Estimates of the probabilities of annual effective doses exceeding certain levels were obtained by calculating the survival function of a lognormal probability density function (PDF) fitted in the measured occupational exposure data. Results The estimated probabilities of exceeding annual effective dose limits of 1 mSv, 6 mSv, and 20 mSv were in the order of 1:200, 1:10,000, and 1:500,000 per person, respectively. Conclusion It is very unlikely that the Category B annual effective dose limit of 6 mSv could even potentially be exceeded using modern equipment and appropriate working methods. Therefore, in terms of estimated effective dose, workers in diagnostic and interventional radiology could be placed into Category B in Finland. Current national personal monitoring practice could be replaced or supplemented using active personal dosimeters, which offer more effective means for optimizing working methods.Peer reviewe

A European perspective on dental cone beam computed tomography systems with a focus on optimisation utilising diagnostic reference levels

Cone beam computed tomography (CBCT) has been available since the late 1990s for use in dentistry. European legislation requires optimisation of protection and the use of diagnostic reference levels (DRLs) as well as regular quality control (QC) of the imaging devices, which is well outlined in existing international recommendations. Nevertheless, the level of application is not known. Earlier studies have indicated that few European countries have established DRLs and that patient doses (exposure parameters) have not been properly optimised. The EURADOS Working Group 12-Dosimetry in Medical Imaging undertook a survey to identify existing practices in Member States. Questionnaires were developed to identify equipment types, clinical procedures performed, and exposure settings used. The surveys were circulated to 22 countries resulting in 28 responses from 13 countries. Variations were identified in the exposure factors and in the doses delivered to patients for similar clinical indicators. Results confirm that patient doses are still not properly optimised and DRLs are largely not established. There is a need to promote the importance of performing QC testing of dental CBCT equipment and to further optimise patient exposure by establishment and use of DRLs as a part of a continuous optimisation process