PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 3: Case manual (version 1.0)

Numerous applications of the PAN AIR computer program system are presented. PAN AIR is user-oriented tool for analyzing and/or designing aerodynamic configurations in subsonic or supersonic flow using a technique generally referred to as a higher order panel method. Problems solved include simple wings in subsonic and supersonic flow, a wing-body in supersonic flow, wing with deflected flap in subsonic flow, design of two-dimensional and three-dimensional wings, axisymmetric nacelle in supersonic flow, and wing-canard-tail-nacelle-fuselage combination in supersonic flow

Localised electro-thermal processing: a new route to the patterning of magnetic recording media

notes: A new route to magnetic nanopatterning demonstrated experimentally and via new theoretical modelpublication-status: Publishedtypes: ArticlePrevious reports have detailed the fabrication of media able to support high density magnetic recording in both longitudinal and perpendicular formats by the global rapid thermal processing of sputtered non-magnetic precursor films. During processing in this manner a magnetic element is released from its nitride and agglomerates to form a random near mono-dispersion of magnetic nano-particles. Here we explore, primarily through modelling and simulation, the feasibility of processing similarly formulated precursor media not globally but locally. We investigate the potential of using conducting nano-probe tips to produce, via electro-thermal (Joule) heating, a nano-patterned recording media in the form of regular arrays of magnetic islands in a non-magnetic host. In the first instance we concentrate on the simplest cobalt based precursor medium for which both initial simulation and experimental studies indicate the formation of magnetic islands with dimensions of the order of the tip diameter is relatively straightforward. The results signify that if practical production scenarios can be devised to produce technologically significant areas of recording media by the rapid multi-probe repetition of this technique, then processing in this manner offers a promising route to areal recording densities of perhaps 5 Terabit/in2 even with the simplest cobalt media. We also note that the electro-thermal processing method is potentially extendable to the production of a wide variety of magnetic materials (eg. PtCo, FeCo, NiFe alloys) and, applied via electrical nano-imprinting type techniques, to the production of a wide variety of patterned structures

Protecting healthcare workers during a pandemic : what can a WHO collaborating centre research partnership contribute?

Objectives. To ascertain whether and how working as a partnership of two World Health Organization collaborating centres (WHOCCs), based respectively in the Global North and Global South, can add insights on “what works to protect healthcare workers (HCWs) during a pandemic, in what contexts, using what mechanism, to achieve what outcome”. Methods. A realist synthesis of seven projects in this research program was carried out to characterize context (C) (including researcher positionality), mechanism (M) (including service relationships) and outcome (O) in each project. An assessment was then conducted of the role of the WHOCC partnership in each study and overall. Results. The research found that lower-resourced countries with higher economic disparity, including South Africa, incurred greater occupational health risk and had less acceptable measures to protect HCWs at the onset of the COVID-19 pandemic than higher-income more-equal counterpart countries. It showed that rigorously adopting occupational health measures can indeed protect the healthcare workforce; training and preventive initiatives can reduce workplace stress; information systems are valued; and HCWs most at-risk (including care aides in the Canadian setting) can be readily identified to trigger adoption of protective actions. The C-M-O analysis showed that various ways of working through a WHOCC partnership not only enabled knowledge sharing, but allowed for triangulating results and, ultimately, initiatives for worker protection. Conclusions. The value of an international partnership on a North-South axis especially lies in providing contextualized global evidence regarding protecting HCWs as a pandemic emerges, particularly with bi-directional cross-jurisdiction participation by researchers working with practitioners.Canadian Institutes of Health Research (CIHR

The TeV spectrum of H1426+428

The BL Lac object H1426+428 was recently detected as a high energy gamma-ray source by the VERITAS collaboration (Horan et al. 2002). We have reanalyzed the 2001 portion of the data used in the detection in order to examine the spectrum of H1426+428 above 250 GeV. We find that the time-averaged spectrum agrees with a power law of the shape dF/dE = 10^(-7.31 +- 0.15(stat) +- 0.16(syst)) x E^(-3.50 +- 0.35(stat) +- 0.05(syst)) m^(-2)s^(-1)TeV^(-1) The statistical evidence from our data for emission above 2.5 TeV is 2.6 sigma. With 95% c.l., the integral flux of H1426+428 above 2.5 TeV is larger than 3% of the corresponding flux from the Crab Nebula. The spectrum is consistent with the (non-contemporaneous) measurement by Aharonian et al. (2002) both in shape and in normalization. Below 800 GeV, the data clearly favours a spectrum steeper than that of any other TeV Blazar observed so far indicating a difference in the processes involved either at the source or in the intervening space.Comment: LaTeX, 8 pages, 4 figures, accepted for publication in Ap

Detection of the BL Lac Object H1426+428 at TeV Gamma Ray Energies

A very high energy (VHE) gamma-ray signal has been detected at the 5.4 sigma level from H1426+428, an x-ray selected BL Lacertae object at a redshift of 0.129. The object was monitored from 1995 - 1998 with the Whipple 10m imaging atmospheric Cherenkov telescope as part of a general blazar survey; the results of these observations, although not statistically significant, were consistently positive. X-ray observations of H1426+428 during 1999 with the BeppoSAX instrument revealed that the peak of its synchrotron spectrum occurs at > 100 keV, leading to the prediction of observable TeV emission from this object. H1426+428 was monitored extensively at the Whipple Observatory during the 1999, 2000, and 2001 observing seasons. The strongest TeV signals were detected in 2000 and 2001. During 2001, an integral flux of 2.04 +/- 0.35 x10e-11 cm-2 s-1 above 280 GeV was recorded from H1426+428. The detection of H1426+428 supports the idea that, as also seen in Markarian 501 and 1ES2344+514, BL Lacertae objects with extremely high synchrotron peak frequencies produce gamma rays in the TeV range.Comment: 35 pages, 7 figures, accepted by ApJ Two upper limits in Table 3 (upper limits for 1995 and 1997) are different from the ApJ versio

A New Upper Limit for the Tau-Neutrino Magnetic Moment

Using a prompt neutrino beam in which a nu_tau component was identified for the first time, the nu_tau magnetic moment was measured based on a search for an anomalous increase in the number of neutrino-electron interactions. One such event was observed when 2.3 were expected from background processes, giving an upper 90% confidence limit of 3.9x10^-7 Bohr magnetons.Comment: 9 pages; 1 figur

Fermilab E791

Fermilab E791, a very high statistics charm particle experiment, recently completed its data taking at Fermilab's Tagged Photon Laboratory. Over 20 billion events were recorded through a loose transverse energy trigger and written to 8mm tape in the the 1991-92 fixed target run at Fermilab. This unprecedented data sample containing charm is being analysed on many-thousand MIP RISC computing farms set up at sites in the collaboration. A glimpse of the data taking and analysis effort is presented. We also show some preliminary results for common charm decay modes. Our present analysis indicates a very rich yield of over 200K reconstructed charm decays.Comment: 4 pages, 1 figure, LaTe

A first measurement of the interaction cross section of the tau neutrino

The DONuT experiment collected data in 1997 and published first results in 2000 based on four observed $\nu_\tau$ charged-current (CC) interactions. The final analysis of the data collected in the experiment is presented in this paper, based on $3.6 \times 10^{17}$ protons on target using the 800 GeV Tevatron beam at Fermilab. The number of observed $\nu_\tau$ CC interactions is 9, from a total of 578 observed neutrino interactions. We calculated the energy-independent part of the tau-neutrino CC cross section ($\nu + \bar \nu$), relative to the well-known $\nu_e$ and $\nu_\mu$ cross sections. The ratio $\sigma(\nu_\tau)$/$\sigma(\nu_{e,\mu})$ was found to be $1.37\pm0.35\pm0.77$. The $\nu_\tau$ CC cross section was found to be $0.72 \pm 0.24\pm0.36 \times 10^{-38}$ cm$^{2}\rm{GeV}^{-1}$. Both results are in agreement the Standard Model.Comment: 37 pages, 15 figure