Hydrothermal base catalysed treatment of Kraft lignin - time dependent analysis and a techno-economic evaluation for carbon fibre applications

The hydrothermal base-catalysed treatment of industrial Kraft lignin (KL) is investigated as a basis for production of a sustainable carbon fibre precursor, with a focus on the time-dependent evolution and impact on precursor properties. Hydrothermal treatment was performed at T = 300 °C and p = 180 bar, with the retention time (tret) varied between 8, 12, 16, 20, and 24 mins. Molecular weight distribution and thermal stability of the processed lignin were close to maximum after 8 min, and 12–16 min respectively. Chemical modification was found to continue (e.g. demethoxylation) over the entire tret range (24 min). Analysis of the recovered oily phase indicated catechol derivatives were stable end-products with, e.g., vanillin and guaiacol as intermediates. A techno-economic analysis indicated a price of ca. 1600 €/t at a production capacity of 10 kt/a is achievable, with main cost-drivers being lignin (60%), fixed costs (20%), and energy (10%)

Bio-based polymer nanocomposites based on nylon 11 and WS2 inorganic nanotubes

Tungsten disulphide nanotubes (INT-WS2) have been successfully dispersed in a bio-based polyamide matrix (nylon 11) by conventional melt processing. The effect of INT-WS2 content on the morphology, thermal stability, crystallization behaviour and dynamic mechanical properties is investigated. The results indicate that these inorganic nanotubes can be efficiently incorporated into the bio-based polymer matrix without the need for modifiers or surfactants. Additionally, it is found that the non-isothermal crystallization behaviour of nylon 11/INT-WS2 depends on both the cooling rate and INT-WS2 concentration. In particular, crystallization kinetics results demonstrate that the nucleating activity of INTs plays a dominant role in accelerating the crystallization of nylon 11. This fact leads to the appearance of the more-disordered phase at higher temperature. More significantly, it was shown that these INT-WS2 nanocomposites can facilitate a good processability and cost efficiency, and will be of interest for many eco-friendly and medical applications

The continuum of spreading depolarizations in acute cortical lesion development: Examining Leao's legacy.

A modern understanding of how cerebral cortical lesions develop after acute brain injury is based on Aristides Leao's historic discoveries of spreading depression and asphyxial/anoxic depolarization. Treated as separate entities for decades, we now appreciate that these events define a continuum of spreading mass depolarizations, a concept that is central to understanding their pathologic effects. Within minutes of acute severe ischemia, the onset of persistent depolarization triggers the breakdown of ion homeostasis and development of cytotoxic edema. These persistent changes are diagnosed as diffusion restriction in magnetic resonance imaging and define the ischemic core. In delayed lesion growth, transient spreading depolarizations arise spontaneously in the ischemic penumbra and induce further persistent depolarization and excitotoxic damage, progressively expanding the ischemic core. The causal role of these waves in lesion development has been proven by real-time monitoring of electrophysiology, blood flow, and cytotoxic edema. The spreading depolarization continuum further applies to other models of acute cortical lesions, suggesting that it is a universal principle of cortical lesion development. These pathophysiologic concepts establish a working hypothesis for translation to human disease, where complex patterns of depolarizations are observed in acute brain injury and appear to mediate and signal ongoing secondary damage

Thermomechanical relaxation and different water states in cottonseed protein derived bioplastics

Thermomechanical relaxation events and different water states in cottonseed protein bioplastics are presented whilst investigating the effects of aldehyde cross-linking agents. Thermomechanical relaxation of cottonseed protein bioplastics associated with protein denaturation, moisture absorption and broad glass transitions (Tg) were observed from DSC and DMA measurements. It was shown that variation of the aldehyde influences the storage modulus at very low temperature (below Tg). From measurements of the water fusion point, enthalpy, vaporisation, and weight loss, three water states in the water-absorbed bioplastics are suggested; namely strongly-bound-to-polymer, weakly-bound-to-polymer and bulk-like water. The water content and unreacted cross-linking agents are influential factors in controlling formation of the different water states, whilst the selection of different aldehydes was found to be negligible. These results could be valuable for adjusting the thermomechanical relaxations of protein based bioplastics, and tailoring their properties in wet environments

Identification of high performance solvents for the sustainable processing of graphene

Nanomaterials have many advanced applications, from bio-medicine to flexible electronics to energy storage, and the broad interest in graphene-based materials and devices means that high annual tonnages will be required to meet this demand. However, manufacturing at the required scale remains unfeasible until economic and environmental obstacles are resolved. Liquid exfoliation of graphite is the preferred scalable method to prepare large quantities of good quality graphene, but only low concentrations are achieved and the solvents habitually employed are toxic. Furthermore, good dispersions of nanomaterials in organic solvents are crucial for the synthesis of many types of nanocomposites. To address the performance and safety issues of solvent use, a bespoke approach to solvent selection was developed and the renewable solvent Cyrene was identified as having excellent properties. Graphene dispersions in Cyrene were found to be an order of magnitude more concentrated than those achieved in N-methylpyrrolidinone (NMP). Key attributes to this success are optimum solvent polarity, and importantly a high viscosity. We report the role of viscosity as crucial for the creation of larger and less defective graphene flakes. These findings can equally be applied to the dispersion of other layered bi-dimensional materials, where alternative solvent options could be used as drop-in replacements for established processes without disruption or the need to use specialized equipment. Thus, the discovery of a benign yet high performance graphene processing solvent enhances the efficiency, sustainability and commercial potential of this ever-growing field, particularly in the area of bulk material processing for large volume applications

Adenovirus: an emerging factor in red squirrel Sciurus vulgaris conservation

1. Adenovirus is an emerging threat to red squirrel Sciurus vulgaris conservation, but confirming clinically significant adenovirus infections in red squirrels is challenging. Rapid intestinal autolysis after death in wild animals frequently obscures pathology characteristic of the disease in animals found dead. 2. We review the available literature to determine current understanding of both subclinical and clinically significant adenovirus infections in free-living wild and captive red squirrel populations. 3. Benefits of scientific testing for adenovirus incorporating both transmission electron microscopy (TEM) and polymerase chain reaction (PCR) technologies are compared and contrasted. We favour viral particle detection using TEM in animals exhibiting enteropathy at post-mortem and the use of PCR to detect subclinical cases where no enteric abnormalities are observed. 4. Adenoviral infections associated with re-introduction studies are evaluated by examination of sporadic cases in wild populations and of data from captive collections used to service such studies. 5. The paucity of data available on adenovirus infection in grey squirrel Sciurus carolinensis populations is documented, and we highlight that although subclinical virus presence is recorded in several locations in Great Britain and in Italy, no clinically significant disease cases have been detected in the species thus far. 6. Current speculation about potential interspecific infection between sciurids and other woodland rodents such as wood mice Apodemus sylvaticus is examined. Where subclinical adenovirus presence has been detected in sympatric populations using the same point food sources, husbandry methods may be used to diminish the potential for cross-infection. 7. Our findings highlight the importance of controlling disease in red squirrel populations by using clearly defined scientific methods. In addition, we propose hypothetical conservation benefits of restricting contact rates between red squirrels and sympatric grey squirrels and of limiting competition from other woodland rodent species

Generalized oscillator strength for Na 3s-3p transition

Generalized oscillator strengths (GOS's) for the Na $3s -3p$ transition have been investigated using the spin-polarized technique of the random phase approximation with exchange (RPAE) and the first Born approximation (FBA), focussing our attention on the position of the minimum. Intershell correlations are found to influence the position of the minimum significantly, but hardly that of the maximum. The RPAE calculation predicts for the first time the positions of the minimum and maximum at momentum transfer, $K$ values of 1.258 a.u. and 1.61 a.u., respectively. The former value is within the range of values extracted from experimental measurements, $K=1.0-1.67$ a.u.. We recommend careful experimental search for the minimum around the predicted value for confirmation.Comment: 11 pages, 2figure

Modeling the extracellular matrix in cell migration and morphogenesis:a guide for the curious biologist

The extracellular matrix (ECM) is a highly complex structure through which biochemical and mechanical signals are transmitted. In processes of cell migration, the ECM also acts as a scaffold, providing structural support to cells as well as points of potential attachment. Although the ECM is a well-studied structure, its role in many biological processes remains difficult to investigate comprehensively due to its complexity and structural variation within an organism. In tandem with experiments, mathematical models are helpful in refining and testing hypotheses, generating predictions, and exploring conditions outside the scope of experiments. Such models can be combined and calibrated with in vivo and in vitro data to identify critical cell-ECM interactions that drive developmental and homeostatic processes, or the progression of diseases. In this review, we focus on mathematical and computational models of the ECM in processes such as cell migration including cancer metastasis, and in tissue structure and morphogenesis. By highlighting the predictive power of these models, we aim to help bridge the gap between experimental and computational approaches to studying the ECM and to provide guidance on selecting an appropriate model framework to complement corresponding experimental studies

Controllable production of liquid and solid biofuels by doping-free, microwave-assisted, pressurised pyrolysis of hemicellulose

Batch, pressurised microwave-assisted pyrolysis of hemicellulose in the absence of any external microwave absorber was found to be a promising route for the production of bio-based chemicals and biofuels. The experiments were conducted in a 10 mL batch reactor using a fixed power of 200 W employing different initial masses of xylan (0.1–0.7 g) for a maximum time, temperature and pressure of 10 min, 250 °C and 200 psi, respectively. The gas, bio-oil and solid (char) yields varied by 16–40%, 2–21% and 40–82%, respectively. Char production is preferential using a low amount of xylan (<0.25 g), while bio-oil production is favoured using a high amount of xylan (0.25–0.7 g). The effect of the sample mass is accounted for by the different physical state of the volatiles released during pyrolysis depending on the pressure attained during the experiment. This permits the process to be easily customised for the selective production of liquid (bio-oil) or solid (bio-char). Regarding the bio-oil, it is composed of a mixture of platform chemicals such as aldehydes, alkenes, phenols, polyaromatic hydrocarbons (PAHC), cyclic ketones and furans, with the composition varying depending on the initial mass of xylan. The char had a higher proportion of C together with a lower proportion of O than the original feedstock. Energy efficiencies of 100 and 26% were achieved for char and bio-oil production, respectively; thus leading to an increase in the HHV of the products (with respect to the original feedstock) of 52% for char and 19% for bio-oil