A lichen protected by a super-hydrophobic and breathable structure

A species of lichen, Lecanora conizaeoides, is shown to be super-hydrophobic. It uses a combination of hydrophobic compounds and multi-layered roughness to shed water effectively. This is combined with gas channels to produce a biological analogue of a waterproof, breathable garment. The particular lichen grows mostly during wet seasons and is unusually resistant to acid rain [Hauck, M., 2003. The Bryotogist 106(2), 257-269; Honegger, R., 1998. Lichenologist 30(3),193-212]. The waterproof, breathable surface allows this lichen to photosynthesise when other species are covered with a layer of water. In addition, rainwater runs off the surface of the organism, reducing its intake of water from above and probably contributing to its resistance to acid rain

Porous materials show superhydrophobic to superhydrophilic switching

Switching between superhydrophobicity and superhydrophilicity in porous materials was predicted theoretically and demonstrated experimentally with the example of thermally induced contact angle change; tunability of this system was also demonstrated

Geometry dominated fluid adsorption on sculptured substrates

Experimental methods allow the shape and chemical composition of solid surfaces to be controlled at a mesoscopic level. Exposing such structured substrates to a gas close to coexistence with its liquid can produce quite distinct adsorption characteristics compared to that occuring for planar systems, which may well play an important role in developing technologies such as super-repellent surfaces or micro-fluidics. Recent studies have concentrated on adsorption of liquids at rough and heterogeneous substrates and the characterisation of nanoscopic liquid films. However, the fundamental effect of geometry has hardly been addressed. Here we show that varying the shape of the substrate can exert a profound influence on the adsorption isotherms allowing us to smoothly connect wetting and capillary condensation through a number of novel and distinct examples of fluid interfacial phenomena. This opens the possibility of tailoring the adsorption properties of solid substrates by sculpturing their surface shape.Comment: 6 pages, 4 figure

Universality for 2D Wedge Wetting

We study 2D wedge wetting using a continuum interfacial Hamiltonian model which is solved by transfer-matrix methods. For arbitrary binding potentials, we are able to exactly calculate the wedge free-energy and interface height distribution function and, thus, can completely classify all types of critical behaviour. We show that critical filling is characterized by strongly universal fluctuation dominated critical exponents, whilst complete filling is determined by the geometry rather than fluctuation effects. Related phenomena for interface depinning from defect lines in the bulk are also considered.Comment: 4 pages, 1 figur

Superhydrophobic Surface Based on a Coral-Like Hierarchical Structure of ZnO

Background: Fabrication of superhydrophobic surfaces has attracted much interest in the past decade. The fabrication methods that have been studied are chemical vapour deposition, the sol-gel method, etching technique, electrochemical deposition, the layer-by-layer deposition, and so on. Simple and inexpensive methods for manufacturing environmentally stable superhydrophobic surfaces have also been proposed lately. However, work referring to the influence of special structures on the wettability, such as hierarchical ZnO nanostructures, is rare. Methodology: This study presents a simple and reproducible method to fabricate a superhydrophobic surface with microscale roughness based on zinc oxide (ZnO) hierarchical structure, which is grown by the hydrothermal method with an alkaline aqueous solution. Coral-like structures of ZnO were fabricated on a glass substrate with a micro-scale roughness, while the antennas of the coral formed the nano-scale roughness. The fresh ZnO films exhibited excellent superhydrophilicity (the apparent contact angle for water droplet was about 0u), while the ability to be wet could be changed to superhydrophobicity after spin-coating Teflon (the apparent contact angle greater than 168u). The procedure reported here can be applied to substrates consisting of other materials and having various shapes. Results: The new process is convenient and environmentally friendly compared to conventional methods. Furthermore, the hierarchical structure generates the extraordinary solid/gas/liquid three-phase contact interface, which is the essentia

Wettability Switching Techniques on Superhydrophobic Surfaces

The wetting properties of superhydrophobic surfaces have generated worldwide research interest. A water drop on these surfaces forms a nearly perfect spherical pearl. Superhydrophobic materials hold considerable promise for potential applications ranging from self cleaning surfaces, completely water impermeable textiles to low cost energy displacement of liquids in lab-on-chip devices. However, the dynamic modification of the liquid droplets behavior and in particular of their wetting properties on these surfaces is still a challenging issue. In this review, after a brief overview on superhydrophobic states definition, the techniques leading to the modification of wettability behavior on superhydrophobic surfaces under specific conditions: optical, magnetic, mechanical, chemical, thermal are discussed. Finally, a focus on electrowetting is made from historical phenomenon pointed out some decades ago on classical planar hydrophobic surfaces to recent breakthrough obtained on superhydrophobic surfaces

Nemateriālo aktīvu grāmatvedības metodoloģiskās problēmas Latvijas Republikā

Nonfluorinated hydrophobic surfaces are of interest for reduced cost, toxicity, and environmental problems. Searching for such surfaces together with versatile processing, A200 silica nanoparticles are modified with an oligodimethylsiloxane and used by themselves or with a polymer matrix. The goal of the surface modification is controlled aggregate size and stable suspensions. Characterization is done by NMR, microanalysis, nitrogen adsorption, and dynamic light scattering. The feasibility of the concept is then demonstrated. The silica aggregates are sprayed in a scalable process to form ultrahydrophobic and imperceptible coatings with surface topographies of controlled nanoscale roughness onto different supports, including nanofibrillated cellulose. To improve adhesion and wear properties, the organosilica was mixed with polymers. The resulting composite coatings are characterized by FE-SEM, AFM, and contact angle measurements. Depending on the nature of the polymer, different functionalities can be developed. Poly­(methyl methacrylate) leads to almost superhydrophobic and highly transparent coatings. Composites based on commercial acrylic car paint show “pearl-bouncing” droplet behavior. A light-emitting polyfluorene is synthesized to prepare luminescent and water repellent coatings on different supports. The interactions between polymers and the organosilica influence coating roughness and are critical for wetting behavior. In summary, the feasibility of a facile, rapid, and fluorine-free hydrophobization concept was successfully demonstrated in multipurpose antiwetting applications

Contemporary Japanese rightist movements

Ph.DDOCTOR OF PHILOSOPH