Design of a 7kW power transfer solar array drive mechanism

With the availability of the Shuttle and the European launcher, Ariane, there will be a continuing trend towards large payload satellite missions requiring high-power, high-inertia, flexible solar arrays. The need arises for a solar array drive with a large power transfer capability which can rotate these solar arrays without disturbing the satellite body pointing. The modular design of such a Solar Array Drive Mechanism (SADM) which is capable of transferring 7kW of power or more is described. Total design flexibility has been achieved, enabling different spacecraft power requirements to be accommodated within the SADM design

Improved liquid-level sensor for cryogenics

Liquid-level indicator, consisting of a diode heated by a resistor, allows simultaneous use of two or three of the liquids nitrogen, hydrogen, and helium. Operation depends on strong temperature-dependence of the forward resistance of a germanium diode and the difference between liquid and vapor in heat-transfer properties

Laparoscopic repair of a large interstitially incarcerated inguinal hernia.

A 68 year old female presented for elective repair of an abdominal wall hernia. Preoperative CT imaging revealed a right inguinal hernia defect with hernia contents coursing cephalad between the external and internal abdominal oblique muscles. This was consistent with an interstitial inguinal hernia, a rare entity outside of post- traumatic hernias. At operation the hernia contents were reduced laparoscopically. The hernia was then repaired by transitioning to the totally extraperitoneal (TEP) approach using a 15cm X 15cm piece of polyester mesh. The patient had an uneventful recovery. Interstitial hernias are rare, difficult to diagnose and potentially dangerous if left untreated. There is no consensus on the ideal repair of these unique hernias. This represents a minimally invasive repair of an unusual hernia, with a novel approach to diagnose and manage the hernia and its redundant sac

Sesame-Style Decomposition of KS-DFT Molecular Dynamics for Direct Interrogation of Nuclear Models

A common paradigm used in the construction of equations of state is to decompose the thermodynamics into a superposition of three terms: a static-lattice cold curve, a contribution from the thermal motion of the nuclei, and a contribution from the thermal excitation of the electrons. While statistical mechanical models for crystals provide tractable framework for the nuclear contribution in the solid phase, much less is understood about the nuclear contribution above the melt temperature ($C_v^{(\text{nuc})}\approx 3R$) and how it should transition to the high-temperature limit ($C_v^{(\text{nuc})} \sim \frac{3}{2}R$). In this work, we describe an algorithm for extracting both the thermal nuclear and thermal electronic contributions from quantum molecular dynamics (QMD). We then use the VASP QMD package to probe thermal nuclear behavior of liquid aluminum at normal density to compare the results to semi-empirical models -- the Johnson generic model, the Chisolm high-temperature liquid model, and the CRIS model.Comment: 6 pages, 4 figures, APS Shock Compression of Condensed Matter Conference Proceedings 201

The Measurement of Medicaid Coverage in the SIPP: Evidence from California, 1990-1996

This paper studies the accuracy of reported Medicaid coverage in the Survey of Income and Program Participation (SIPP) using a unique data set formed by matching SIPP survey responses to administrative records from the State of California. Overall, we estimate that the SIPP underestimates Medicaid coverage in the California population by about 10 percent. Among SIPP respondents who can be matched to administrative records, we estimate that the probability someone reports Medicaid coverage in a month when they are actually covered is around 85 percent. The corresponding probability for low-income children is even higher - at least 90 percent. These estimates suggest that the SIPP provides reasonably accurate coverage reports for those who are actually in the Medicaid system. On the other hand, our estimate of the false positive rate (the rate of reported coverage for those who are not covered in the administrative records) is relatively high: 2.5 percent for the sample as a whole, and up to 20 percent for poor children. Some of this is due to errors in the recording of Social Security numbers in the administrative system, rather than to problems in the SIPP.

Gene loss and lineage specific restriction-modification systems associated with niche differentiation in the Campylobacter jejuni Sequence Type 403 clonal complex

Campylobacter jejuni is a highly diverse species of bacteria commonly associated with infectious intestinal disease of humans and zoonotic carriage in poultry, cattle, pigs, and other animals. The species contains a large number of distinct clonal complexes that vary from host generalist lineages commonly found in poultry, livestock, and human disease cases to host-adapted specialized lineages primarily associated with livestock or poultry. Here, we present novel data on the ST403 clonal complex of C. jejuni, a lineage that has not been reported in avian hosts. Our data show that the lineage exhibits a distinctive pattern of intralineage recombination that is accompanied by the presence of lineage-specific restriction-modification systems. Furthermore, we show that the ST403 complex has undergone gene decay at a number of loci. Our data provide a putative link between the lack of association with avian hosts of C. jejuni ST403 and both gene gain and gene loss through nonsense mutations in coding sequences of genes, resulting in pseudogene formation

Barriers to Nurse Practitioner Full Practice Authority (FPA): State of the Science

Purpose: To explore the various barriers to full practice authority (FPA) of nurse practitioners (NP) in the United States, and to identify the specific legislative barriers to FPA.Background: FPA for NPs is cited as a way to reduce the provider shortage in the U.S, increasing access to healthcare. However, the majority of states across the country restrict the NP ability to provide primary care. As of 2015, only 21 states offer NP’s full practice authority.Data Sources: A comprehensive literature search was conducted using data bases by PubMed, and MeSH, EBM Search, CINAHL, and Google Scholar. Thirty articles were chosen for synthesis.Results: Several barriers impede the ability of NPs to practice autonomously including lack of formal business or marketing education, reduced reimbursement rates, and lack of recognition from public and other health professionals about their preparation. The most common barrier is restrictive legislation halting NP practice at the level of their full knowledge and preparation. No articles were found identifying specific barriers to implementing FPA legislation.Implications: There is a gap in the literature identifying specific barriers to implementing successful legislation to remedy this problem. Understanding how NPs, NP organizations, legislators, and policy-makers are working to overcome these barriers and attain full practice authority in their respective states will help other states in their efforts to obtain similar legislation

Material flow during the extrusion of simple and complex cross-sections using FEM

This paper deals with the extrusion of rod and shape sections and uses a 3D finite element model analysis (FEM) to predict the effect of die geometry on maximum extrusion load. A description of material flow in the container is considered in more detail for rod and shape sections in order to fully comprehend the transient conditions occurring during the process cycle. A comparison with experiments is made to assess the relative importance of some extrusion parameters in the extrusion process and to ensure that the numerical discretisation yields a realistic simulation of the process. The usefulness and the limitation of FEM are discussed when modelling complex shapes. Results are presented for velocity contours and shear stress distribution during the extrusion process. It is shown that for most of the shapes investigated, the material making up the extrudate cross-sections originates from differing regions of virgin material within the billet. The outside surface of the extrudate originates from the material moving along the dead metal zone (DMZ) and the core of the extrudate from the central deformation zone. The FE program appears to predict all the major characteristics of the flow observed macroscopically