5,480 research outputs found
Study to determine dielectric properties of sandstone, shale, coal, and slate
Triplicate dielectric constant and loss tangent measurements on samples of sandstone, shale, coal, and slate were performed. Each of the three necessary configurations of the coal material was sampled to obtain measurements, with each sample machined parallel to the coal layering orientation. The coal samples were machined perpendicular to the coal layering and measured. They were conditioned at 100% humidity and at room temperature and remeasured; then conditioned in an elevated environment, and remeasured for dielectric properties. The coal data appear to remain relatively constant over the microwave frequency region. At the Ghz frequencies, the relative dielectric constant of coal is slightly higher for the E-field parallel to the layers than for the perpendicular case
A submillimeter interference spectrometer - Characteristics, performance and measurements
Performance characteristics of interference spectrometer using submillimeter wave
Vortex -- Kink Interaction and Capillary Waves in a Vector Superfluid
Interaction of a vortex in a circularly polarized superfluid component of a
2d complex vector field with the phase boundary between superfluid phases with
opposite signs of polarization leads to a resonant excitation of a
``capillary'' wave on the boundary. This leads to energy losses by the
vortex--image pair that has to cause its eventual annihilation.Comment: LaTeX 7 pages, no figure
Detecting the harmonics of oscillations with time-variable frequencies
A method is introduced for the spectral analysis of complex noisy signals containing several frequency components. It enables components that are independent to be distinguished from the harmonics of nonsinusoidal oscillatory processes of lower frequency. The method is based on mutual information and surrogate testing combined with the wavelet transform, and it is applicable to relatively short time series containing frequencies that are time variable. Where the fundamental frequency and harmonics of a process can be identified, the characteristic shape of the corresponding oscillation can be determined, enabling adaptive filtering to remove other components and nonoscillatory noise from the signal. Thus the total bandwidth of the signal can be correctly partitioned and the power associated with each component then can be quantified more accurately. The method is first demonstrated on numerical examples. It is then used to identify the higher harmonics of oscillations in human skin blood flow, both spontaneous and associated with periodic iontophoresis of a vasodilatory agent. The method should be equally relevant to all situations where signals of comparable complexity are encountered, including applications in astrophysics, engineering, and electrical circuits, as well as in other areas of physiology and biology
Lorentz Beams
A new kind of tridimensional scalar optical beams is introduced. These beams
are called Lorentz beams because the form of their transverse pattern in the
source plane is the product of two independent Lorentz functions. Closed-form
expression of free-space propagation under paraxial limit is derived and pseudo
non-diffracting features pointed out. Moreover, as the slowly varying part of
these fields fulfils the scalar paraxial wave equation, it follows that there
exist also Lorentz-Gauss beams, i.e. beams obtained by multipying the original
Lorentz beam to a Gaussian apodization function. Although the existence of
Lorentz-Gauss beams can be shown by using two different and independent ways
obtained recently from Kiselev [Opt. Spectr. 96, 4 (2004)] and Gutierrez-Vega
et al. [JOSA A 22, 289-298, (2005)], here we have followed a third different
approach, which makes use of Lie's group theory, and which possesses the merit
to put into evidence the symmetries present in paraxial Optics.Comment: 11 pages, 1 figure, submitted to Journal of Optics
Extreme Kuiper Belt Object 2001 QG298 and the Fraction of Contact Binaries
Extensive time-resolved observations of Kuiper Belt object 2001 QG298 show a
lightcurve with a peak-to-peak variation of 1.14 +-0.04 magnitudes and
single-peaked period of 6.8872 +- 0.0002 hr. The mean absolute magnitude is
6.85 magnitudes which corresponds to a mean effective radius of 122 (77) km if
an albedo of 0.04 (0.10) is assumed. This is the first known Kuiper Belt object
and only the third minor planet with a radius > 25 km to display a lightcurve
with a range in excess of 1 magnitude. We find the colors to be typical for a
Kuiper Belt object (B-V = 1.00 +- 0.04, V-R = 0.60 +- 0.02) with no variation
in color between minimum and maximum light. The large light variation,
relatively long double-peaked period and absence of rotational color change
argue against explanations due to albedo markings or elongation due to high
angular momentum. Instead, we suggest that 2001 QG298 may be a very close or
contact binary similar in structure to what has been independently proposed for
the Trojan asteroid 624 Hektor. If so, its rotational period would be twice the
lightcurve period or 13.7744 +- 0.0004 hr. By correcting for the effects of
projection, we estimate that the fraction of similar objects in the Kuiper Belt
is at least 10% to 20% with the true fraction probably much higher. A high
abundance of close and contact binaries is expected in some scenarios for the
evolution of binary Kuiper Belt objects.Comment: 15 text pages,6 figures(Color),5 Tables, Accepted to AJ for May 200
The structure of epitaxial V2O3 films and their surfaces : a medium energy ion scattering study
Medium energy ion scattering, using 100 keV H+ incident ions, has been used to investigate the growth of epitaxial films, up to thicknesses of ~200 Å, of V2O3 on both Pd(111) and Au(111). Scattered-ion energy spectra provide a measure of the average film thickness and the variations in this thickness, and show that, with suitable annealing, the crystalline quality is good. Plots of the scattering yield as a function of scattering angle, so-called blocking curves, have been measured for two different incidence directions and have been used to determine the surface structure. Specifically, scattering simulations for a range of different model structures show poor agreement with experiment for half-metal (….V’O3V) and vanadyl (….V’O3V=O) terminations, with and without surface interlayer relaxations. However, good agreement with experiment is found for the modified oxygen-termination structure, first proposed by Kresse et al., in which a subsurface V half-metal layer is moved up into the outermost V buckled metal layer to produce a VO2 overlayer on the underlying V2O3, with an associated layer structure of ….O3VV’’V’O3
Thermal simulation of magnetization reversals for size-distributed assemblies of core-shell exchange biased nanoparticles
A temperature dependent coherent magnetization reversal model is proposed for
size-distributed assemblies of ferromagnetic nanoparticles and
ferromagnetic-antiferromagnetic core-shell nanoparticles. The nanoparticles are
assumed to be of uniaxial anisotropy and all aligned along their easy axis. The
thermal dependence is included by considering thermal fluctuations, implemented
via the N\'eel-Arrhenius theory. Thermal and angular dependence of
magnetization reversal loops, coercive field and exchange-bias field are
obtained, showing that F-AF size-distributed exchange-coupled nanoparticles
exhibit temperature-dependent asymmetric magnetization reversal. Also,
non-monotonic evolutions of He and Hc with T are demonstrated. The angular
dependence of Hc with T exhibits a complex behavior, with the presence of an
apex, whose position and amplitude are strongly T dependent. The angular
dependence of He with T exhibits complex behaviors, which depends on the AF
anisotropy and exchange coupling. The resulting angular behavior demonstrates
the key role of the size distribution and temperature in the magnetic response
of nanoparticles.Comment: Revised arguments in Introduction and last sectio
The shape of invasion perclation clusters in random and correlated media
The shape of two-dimensional invasion percolation clusters are studied
numerically for both non-trapping (NTIP) and trapping (TIP) invasion
percolation processes. Two different anisotropy quantifiers, the anisotropy
parameter and the asphericity are used for probing the degree of anisotropy of
clusters. We observe that in spite of the difference in scaling properties of
NTIP and TIP, there is no difference in the values of anisotropy quantifiers of
these processes. Furthermore, we find that in completely random media, the
invasion percolation clusters are on average slightly less isotropic than
standard percolation clusters. Introducing isotropic long-range correlations
into the media reduces the isotropy of the invasion percolation clusters. The
effect is more pronounced for the case of persisting long-range correlations.
The implication of boundary conditions on the shape of clusters is another
subject of interest. Compared to the case of free boundary conditions, IP
clusters of conventional rectangular geometry turn out to be more isotropic.
Moreover, we see that in conventional rectangular geometry the NTIP clusters
are more isotropic than TIP clusters
- …