The problem of offset in acoustic pulse reflectometry

Acoustic pulse reflectometry has become established as a useful non-invasive technique for measuring a variety of duct properties. A sound pulse is injected into the duct under investigation and the resultant reflections are recorded. Suitable analysis of the reflections yields the input impulse response of the duct, from which both its input impedance and its internal dimensions can be calculated. However, an input impulse response measurement made using acoustic pulse reflectometry generally contains an offset. Unless this offset is removed, the application of a bore reconstruction algorithm results in a calculated duct profile which expands or contracts spuriously. In this paper, the offset in an input impulse response measurement is shown to consist of both constant and time-varying components. Methods of preventing or removing these DC and time-varying offsets are proposed and subsequent improvements to the bore reconstruction accuracy are demonstrated

Virtual Pitch and Pitch Shifts in Church Bells

It is well established that musical sounds comprising multiple partials with frequencies approximately in the ratio of small integers give rise to a strong sensation of pitch even if the lowest or fundamental partial is missing—the so-called virtual pitch effect. Experiments on thirty test subjects demonstrate that this virtual pitch is shifted significantly by changes in the spacing of the constituent partials. The experiments measured pitch by comparison of sounds of similar timbre and were automated so that they could be performed remotely across the Internet. Analysis of the test sounds used shows that the pitch shifts are not predicted by Terhardt’s classic model of virtual pitch. The test sounds used were modelled on the sounds of church bells, but a further experiment on seventeen test subjects showed that changes in partial amplitude only had a minor effect on the pitch shifts observed, and that a pitch shift was still observed when two of the lowest frequency partials were removed, so that the effects reported are of general interest

Spectral pitch distance and microtonal melodies

We present an experiment designed to test the effectiveness of spectral pitch distance at modeling the degree of “affinity” or “fit” of pairs of successively played tones or chords (spectral pitch distance is the cosine distance between salience-weighted, Gaussian-smoothed, pitch domain embeddings of spectral pitches—typically the first eight to ten partials of a tone). The results of a previously conducted experiment, which collected ratings of the perceived similarity and fit of root-position major and minor triads, suggest the model works well for pairs of triads in standard 12-tone equal temperament tunings. The new experiment has been designed to test the effectiveness of spectral pitch distance at modeling the affinity of tones in microtonal melodies where the partials of the tones can be variably tempered between being perfectly harmonic and perfectly matched to the underlying microtonal tuning. The use of microtonal tunings helps to disambiguate innate perceptual (psychoacoustical) responses from learned (cultural) responses. Participants are presented with a software synthesizer containing two unlabeled controls: one adjusts the precise tuning of the tones; the other adjusts the extent to which the spectrum is tempered to match the tuning (as set by the first control). A selection of microtonal melodies are played in different tunings, and the participants adjust one, or both, controls until they find a “sweet spot” at which the music sounds most “in-tune” and the notes best “fit” together. The results of these experiments will be presented and discussed

Metrics for pitch collections

Models of the perceived distance between pairs of pitch collections are a core component of broader models of the perception of tonality as a whole. Numerous different distance measures have been proposed, including voice-leading, psychoacoustic, and pitch and interval class distances; but, so far, there has been no attempt to bind these different measures into a single mathematical framework, nor to incorporate the uncertain or probabilistic nature of pitch perception (whereby tones with similar frequencies may, or may not, be heard as having the same pitch). To achieve these aims, we embed pitch collections in novel multi-way expectation arrays, and show how metrics between such arrays can model the perceived dissimilarity of the pitch collections they embed. By modeling the uncertainties of human pitch perception, expectation arrays indicate the expected number of tones, ordered pairs of tones, ordered triples of tones and so forth, that are heard as having any given pitch, dyad of pitches, triad of pitches, and so forth. The pitches can be either absolute or relative (in which case the arrays are invariant with respect to transposition). We provide a number of examples that show how the metrics accord well with musical intuition, and suggest some ways in which this work may be developed

'I'm bored, get me out of here!'

John Sharp and Brian Hemmings consider advances in the study of academic boredom, the implications for students in higher education, and what might be done to support them

Advanced control concepts

The problems of excess control devices and insufficient trim control capability on shuttle ascent vehicles were investigated. The trim problem is solved at all time points of interest using Lagrangian multipliers and a Simplex based iterative algorithm developed as a result of the study. This algorithm has the capability to solve any bounded linear problem with physically realizable constraints, and to minimize any piecewise differentiable cost function. Both solution methods also automatically distribute the command torques to the control devices. It is shown that trim requirements are unrealizable if only the orbiter engines and the aerodynamic surfaces are used

LIF measurement of the diluting effect of surface waves on turbulent buoyant plumes.

In this paper, the diluting effect of surface waves on a buoyant plume has been measured using a Laser Induced Fluorescence (LIF) technique. The resulting time-averaged, full field concentration maps have allowed quantification of enhanced mixing due to surface waves as well as measurement of other plume parameters

Spatially and Temporally Explicit Energy System Modelling to Support the Transition to a Low Carbon Energy Infrastructure – Case Study for Wind Energy in the UK

Renewable energy sources and electricity demand vary with time and space and the energy system is constrained by the location of the current infrastructure in place. The transitioning to a low carbon energy society can be facilitated by combining long term planning of infrastructure with taking spatial and temporal characteristics of the energy system into account. There is a lack of studies addressing this systemic view. We soft-link two models in order to analyse long term investment decisions in generation, transmission and storage capacities and the effects of short-term fluctuation of renewable supply: The national energy system model UKTM (UK TIMES model) and a dispatch model. The modelling approach combines the benefits of two models: an energy system model to analyse decarbonisation pathways and a power dispatch model that can evaluate the technical feasibility of those pathways and the impact of intermittent renewable energy sources on the power market. Results give us the technical feasibility of the UKTM solution from 2010 until 2050. This allows us to determine lower bounds of flexible elements and feeding them back in an iterative process (e.g. storage, demand side control, balancing). We apply the methodology to study the long-term investments of wind infrastructure in the United Kingdom