Application of Citrus By-Products in the Production of Active Food Packaging

Some citrus by-products such as orange peel contains valuable compounds that could be recovered and restored into the food chain. In this study, an efficient valorization of orange peel has been investigated using green extraction, fractionation, and impregnation techniques. The first step included its extraction using CO2 and ethanol under different pressure (200-400 bar) and temperature (35-55 degrees C) conditions. The extracts obtained at 300 bar and 45 degrees C showed strong antioxidant with moderate antimicrobial activity. Then, the extract was subjected to a sequential fractionation process. The fraction obtained at 300 bar, 45 degrees C, and using 32% ethanol showed the strongest antioxidant and antimicrobial activity with a high extraction yield. Finally, the potential of the two best extracts (obtained at 400 bar and 45 degrees C before any fractionation and the fractions obtained at 300 bar, 45 degrees C using 32% ethanol) was determined by conducting an impregnation process to obtain an antioxidant food-grade rigid plastic that would preserve fresh food. The percentage of cosolvent (1 and 2% ethanol), the impregnation time (1 and 3 h), the pressure (200 and 400 bar), and the temperature (35 and 55 degrees C) were evaluated as variables of this process. The impregnated plastic showed good antioxidant and antimicrobial activitiesWe gratefully acknowledge the Spanish Ministry of Science and Technology (Project CTQ2014-52427-R) for its financial support through FEDER (European Funds for Regional Development)

Screening of the supercritical impregnation of olea europaea leaves extract into filaments of thermoplastic polyurethane (TPU) and polylactic acid (PLA) intended for biomedical applications

The leaves of Olea europaea as agricultural waste represent a convenient source of antioxi-dants. In combination with supercritical CO2 (scCO2), assisted impregnation is an interesting strategy for the preparation of biomedical devices with specific bioactivity. For this purpose, 3D-printable filaments of thermoplastic polyurethane (TPU) and polylactic acid (PLA) were employed for the supercritical impregnation of ethanolic olive leaves extract (OLE) for biomedical application. The extraction of OLE was performed using pressurized liquids. The effect of pressure (100–400 bar), temperature (35–55 °C), and the polymer type on the OLE impregnation and the swelling degree were studied including a morphological analysis and the measurement of the final antioxidant ac-tivity. All the studied variables as well as their interactions showed significant effects on the OLE loading. Higher temperatures favored the OLE loading while the pressure presented opposite effects at values higher than 250 bar. Thus, the highest OLE loadings were achieved at 250 bar and 55 °C for both polymers. However, TPU showed c.a. 4 times higher OLE loading and antioxidant activity in comparison with PLA at the optimal conditions. To the best of our knowledge, this is the first report using TPU for the supercritical impregnation of a natural extract with bioactivity.Fil: Machado, Noelia Daiana. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Cejudo Bastante, Cristina. Universidad de Cadiz. Facultad de Ciencias; EspañaFil: Goñi, Maria Laura. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Gañan, Nicolas Alberto. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Casas Cardoso, Lourdes. Universidad de Cadiz. Facultad de Ciencias; EspañaFil: Mantell Serrano, Casimiro. Universidad de Cadiz. Facultad de Ciencias; Españ

Structural Modification of Polymers Functionalized with Mango Leaf Extract by Supercritical Impregnation: Approaching of Further Food and Biomedical Applications

Identifying new polymers from natural resources that can be effectively functionalized can have a substantial impact on biomedical devices and food preservation fields. Some of these polymers would be made of biodegradable, renewable and compostable materials, and present the kind of porosity required to effectively carry active compounds that confer on them the desired properties for their intended applications. Some natural extracts, such as mango leaf extract, have been proven to have high levels of antioxidant, antimicrobial or anti-inflammatory properties, making them good candidates for controlled-release applications. This work intends to investigate the supercritical impregnation of different types of polymers (ABS, PETG, TPU, PC and PCL) with mango leaf extract. The influence of temperature and pressure on the polymers' structure (swelling and foaming processes) and their different behaviors have been analyzed. Thus, TPU and PC experience minimal structural modifications, while PETG, PCL and ABS, on the other hand, suffer quite significant structural changes. TPU and PETG were selected as the representative polymers for each one of these behaviors to delve into mango leaf extract impregnation processes. The bioactive capacity of the extract is present in either impregnated polymer, with 25.7% antioxidant activity by TPU processed at 35 degrees C and 100 bar and 32.9% antioxidant activity by PETG impregnated at 75 degrees C and 400 ba

Supercritical Impregnation of Ketoprofen into Polylactic Acid for Biomedical Application: Analysis and Modeling of the Release Kinetic

Ketoprofen (KET) is an anti-inflammatory drug often used in medicine due to its analgesic and antipyretic effects. If it is administered in a controlled form by means of different dosing devices, it acts throughout the patient's recovery period improving its efficacy. This study intends to support the use of supercritical solvent impregnation (SSI) as an efficient technique to develop polylactic acid (PLA) functionalized with ketoprofen, for use as controlled drug release devices. For this purpose, firstly, the influence of different SSI variables on the desirable swelling of the polymer structure, while avoiding their foaming, were evaluated. Then, the resulting ketoprofen loading was evaluated under different pressure/temperature conditions. It was generally found that as pressure and temperature are higher, the drug impregnation loads also increase. The maximum impregnation loads (at about 9% KET/PLA) were obtained at 200 bar and 75 degrees C. In vitro drug release tests of the impregnated compound were also carried out, and it was found that drug release profiles were also dependent on the specific pressure and temperature conditions used for the impregnation of each polymer filament

Creation of Immersive Resources Based on Virtual Reality for Dissemination and Teaching in Chemical Engineering

Chemical Engineering is a complex discipline that is mainly applied to the industrial context, which makes it difficult to approach real equipment and systems in the classroom to students. Nevertheless, Information and Communication Technologies (ICTs) are particularly useful to encourage active and autonomous learning, normally associated with deeper levels of engagement and understanding of the subjects taught. In this way, several studies have demonstrated that immersion has the potential to increase learning experiences and improve creativity and engagement, Virtual Reality (VR) being a remarkable example. In this context, we created and shared with students two immersive resources based on VR: (a) a laboratory 360 degrees video tour, which was used to disseminate the Chemical Engineering Degree in an Open Door Days organized for high school students; and (b) an experiential learning tool integrated with Moodle, which was available previously to face-to-face practical lessons of the subject Separation Operations. In both cases, the feedback from the participant students was positive. High school students increased their interest in Chemical Engineering Degree after viewing the 360 degrees video, meanwhile undergraduate students found the immersive tool useful in the subsequent performance of real practical activities. From the perspective of professors, creation of these resources required purchase of equipment, time and effort, but they were highly valued as a tool for disseminating and supporting teaching, being an initial starting point for the creation of more enhanced VR-based materials

Supercritical Impregnation of PLA Filaments with Mango Leaf Extract to Manufacture Functionalized Biomedical Devices by 3D Printing

Polylactic Acid (PLA) filaments impregnated with ethanolic mango leaves extract (MLE) with pharmacological properties were obtained by supercritical impregnation. The effects of pressure, temperature and amount of extract on the response variables, i.e., swelling, extract loading and bioactivity of the PLA filaments, were determined. The analysis of the filaments biocapacities revealed that impregnated PLA filaments showed 11.07% antidenaturant capacity and 88.13% antioxidant activity, which after a 9-day incubation shifted to 30.10% and 9.90%, respectively. Subsequently, the same tests were conducted on printed samples. Before their incubation, the printed samples showed 79.09% antioxidant activity and no antidenaturant capacity was detected. However, after their incubation, the antioxidant activity went down to only 2.50%, while the antidenaturant capacity raised up to 23.50%. The persistence of the bioactive properties after printing opens the possibility of using the functionalized PLA filaments as the feed for a three-dimensional (3D) printer.This work is part of a project granted by the Junta de Andalucia (P18-RT-3272) through its financing by the FEDER funds 2014-2020

Biobased films of nanocellulose and mango leaf extract for active food packaging: supercritical impregnation versus solvent casting

Antioxidant and antimicrobial free-standing films composed of nanofibrillated cellulose (NFC) and a polyphenolic-rich extract, viz. mango leaf extract (MLE), were produced via supercritical solvent impregnation (SSI) and conventional solvent casting film-processing methodologies. The CO2-assisted impregnation of NFC with MLE created robust films with thermal stability up to 250 °C, good mechanical performance (Young's modulus > 4.7 GPa), UV-light barrier properties, antioxidant capacity with maximum inhibition percentage of ca. 84%, and antimicrobial activity against Staphylococcus aureus (growth inhibition ≈ 37%) and Escherichia coli (growth inhibition ≈ 91%). The comparison of the NFC/MLE films prepared by SSI with those fabricated via solvent casting shows a clear advantage of the SSI methodology. Particularly, the antioxidant and antimicrobial activities are visibly higher in the films fabricated by the CO2-assisted impregnation of MLE into NFC. In fact, for the SSI films, the MLE components are mostly adsorbed at the surface and not in the bulk of the biopolymeric matrix, which translates into faster migrations and, hence, higher active properties. All these findings evinced the potential performance of the NFC/MLE films prepared by the eco-friendly SSI as UV-blocking, antioxidant, and antimicrobial bio-based materials for application as sustainable active food packaging.publishe

Potential Use of Annona Genus Plants Leaf Extracts to Produce Bioactive Transdermal Patches by Supercritical Solvent Impregnation

The objective of the present work was to develop a bioactive transdermal patch functionalized with Annona leaf extracts (ALE) by means of supercritical impregnation technique. The potential of six different Annona leaf extracts (ALE) obtained with the enhanced solvent system formed by carbon dioxide + ethanol/acetone was evaluated taking into account the antioxidant activity, total phenol composition and global extraction yields. For the impregnation of ALE, two drug supporting systems were tested: hydrocolloid sodium carboxymethyl cellulose (NaCMC) and polyester dressings (PD). The effect of the impregnation conditions, including pressure (P), temperature (T), percent of co-solvent (ethanol) and ALE/polymer mass ratio, was determined with regard to the loading and the functional activity of the impregnated samples. The optimal impregnation conditions of ALE were established at 55 degrees C and 300 bar which led to obtained transdermal patches with antioxidant and antimicrobial capacity. In order to understand the behavior of the process, the homogeneity of the samples in the vessels was also evaluated. The best results were obtained at higher proportions of co-solvent in the system.The authors would like to thank the research group in "The Institute for Mediterranean and Subtropical Horticulture La Mayora (IHSM)" (CSIC, Malaga, Spain) for providing the raw material and for their support. This research was funded by Junta de Andalucia-FEDER funds 2014-2020, project P18-RT-3272, the Spanish Ministry of Science and Technology, project CTQ2017-86661-R and the European Regional Development Fund(ERDF)

Stabilization of white grape must by application of supercritical CO2 as a strategy to reduce the SO2 content

Winemaking worldwide, and especially the one carried out in warm climates, is looking for strategies to prevent enzymatic and microbial alterations of must and wines alternative to SO2 addition. However, there is any methodology as efficient as SO2, being used in combination with those substances in the best of cases, which does not suppose a real solution to the problem. In search of safer alternatives to preserve enological products, high-pressure treatments using supercritical CO2 can be a sustainable alternative The aim of this study is to analyze the biocidal effect, and enzymatic inactivation of supercritical CO2 on white grape must (Pedro Ximenez variety), in order to reduce SO2 in the pre-fermentative stage. It was processed by varying the main variable of the process, the percentage of CO2 (10, 40, and 70%), keeping the rest of the variables constant (100 bar, 35 ºC 10 min). Results are very promising and any of the treatment conditions seem to alter the physicochemical characteristics of must. Regarding must stabilization, this technique has proven to be very efficient in the reduction of total microorganisms, as well as reduce enzymatic activity of polyphenol oxidase, showing better results than those obtain when using SO2

Selective Fractionation And Isolation Of Allelopathic Compounds From Helianthus Annuus L. Leaves By Means Of High-Pressure Techniques

The allelopathic potential of Helianthus annuus L. leaves was study based on bio-directed chemical fractionation approach. Aerial parts of H. annuus were extracted by means of SFE using supercritical carbon dioxide (scCO2) and ESE using CO2+50% EtOH/H2O (varying ethanol in water from 0 to 100%). Extractions were carried out at 400 bar, 55 °C, 20 g/min and for 4 h. Then, extracts were fractionated in three separators at the following conditions: S1: 200 bar/45 °C; S2: 90 bar/40 °C; and S3: 1 atm/30 °C. ESE obtained higher overall yields than scCO2 and the use of water as cosolvent (CO2+50% H2O) resulted in a S3 fraction free from chlorophylls and rich in bioactive compounds. 14 compounds, including fatty acids, terpenes, flavonoids and heliannuols, were isolated from this fraction. After performing the bioassay on pure compounds, heliannuol D, tambulin, pinoresinol and sesquiterpene 10-oxo-isodauc-3-en-15-al showed the most effective inhibitor profiles