Occlusal Load Considerations in Implant-Supported Fixed Restorations

The advent of new technologies in the field of medicine and dentistry is creating improvements that lead clinicians to have materials and procedures able to improve patients' quality of life. The aim of this article is to evaluate occlusion load and its consequences on fixed implant-supported prosthesis. New materials have granted clinicians the possibility achieve great aesthetic results in dental prosthesis, and new procedures allow them to standardize and give precise and repeatable results, especially for the functional and long-term stability aspects of products. Some principles should be carefully evaluated and applied to every dental prosthesis; the evaluation of the forces and fitting of meso-structures to dental implants, an aspect that is often not well considered by clinicians, is the main focus of this article

FEM and Von Mises analysis on prosthetic crowns structural elements: evaluation of different applied materials

The aim of this paper is to underline the mechanical properties of dental single crown prosthodontics materials in order to differentiate the possibility of using each material for typical clinical condition and masticatory load. Objective of the investigation is to highlight the stress distribution over different common dental crowns by using computer-aided design software and a three-dimensional virtual model. By using engineering systems of analyses like FEM and Von Mises investigations it has been highlighted the strength over simulated lower first premolar crowns made by chrome cobalt alloy, golden alloy, dental resin, and zirconia. The prosthodontics crown models have been created and put on simulated chewing stresses. The three-dimensional models were subjected to axial and oblique forces and both guaranteed expected results over simulated masticatory cycle. Dental resin presented the low value of fracture while high values have been recorded for the metal alloy and zirconia. Clinicians should choose the better prosthetic solution for the teeth they want to restore and replace. Both prosthetic dental crowns offer long-term success if applied following the manufacture guide limitations and suggestions

FEM and Von Mises Analysis on Prosthetic Crowns Structural Elements: Evaluation of Different Applied Materials

The aim of this paper is to underline the mechanical properties of dental single crown prosthodontics materials in order to differentiate the possibility of using each material for typical clinical condition and masticatory load. Objective of the investigation is to highlight the stress distribution over different common dental crowns by using computer-aided design software and a three-dimensional virtual model. By using engineering systems of analyses like FEM and Von Mises investigations it has been highlighted the strength over simulated lower first premolar crowns made by chrome cobalt alloy, golden alloy, dental resin, and zirconia. The prosthodontics crown models have been created and put on simulated chewing stresses. The three-dimensional models were subjected to axial and oblique forces and both guaranteed expected results over simulated masticatory cycle. Dental resin presented the low value of fracture while high values have been recorded for the metal alloy and zirconia. Clinicians should choose the better prosthetic solution for the teeth they want to restore and replace. Both prosthetic dental crowns offer long-term success if applied following the manufacture guide limitations and suggestions

Are men universally more dismissing than women? Gender differences in romantic attachment across 62 cultural regions

The authors thank Susan Sprecher (USA), Del Paulhus (Canada), Glenn D. Wilson (England), Qazi Rahman (England), Alois Angleitner (Germany), Angelika Hofhansl (Austria), Tamio Imagawa (Japan), Minoru Wada (Japan), Junichi Taniguchi (Japan), and Yuji Kanemasa (Japan) for helping with data collection and contributing significantly to the samples used in this study.Gender differences in the dismissing form of adult romantic attachment were investigated as part of the International Sexuality Description Project—a survey study of 17,804 people from 62 cultural regions. Contrary to research findings previously reported in Western cultures, we found that men were not significantly more dismissing than women across all cultural regions. Gender differences in dismissing romantic attachment were evident in most cultures, but were typically only small to moderate in magnitude. Looking across cultures, the degree of gender differentiation in dismissing romantic attachment was predictably associated with sociocultural indicators. Generally, these associations supported evolutionary theories of romantic attachment, with smaller gender differences evident in cultures with high–stress and high–fertility reproductive environments. Social role theories of human sexuality received less support in that more progressive sex–role ideologies and national gender equity indexes were not cross–culturally linked as expected to smaller gender differences in dismissing romantic attachment.peer-reviewe

Elastics Selector Gauge as Orthodontics Device Applied to Inter-Maxillary Traction during Malocclusion Correction

Elastics are the simplest device that can be used during a class correction in orthodontics, and despite the simplicity of a latex band, they are very effective and powerful. The resultant inter-maxillary force affects not only the teeth, but even the mandibular position, and consequently the temporomandibular joints (TMJ). The purpose of our work is to simplify the use of elastics, and to reduce the amount of inventory for orthodontists, because there is a lot of merceology available on the market, and different ways of using the elastics. The use of elastics in clinical practice is based on the force extension values, which are given by the manufacturer for the different sizes of the elastics, generally when they are stretched to three times their lumen size. Various configurations allow for the correction of different malocclusions. We propose a new classification and a new device, the elastic selector gauge, in order to allow clinicians to quickly and easily choose the right elastic in all conditions

Occlusal Load Considerations in Implant-Supported Fixed Restorations

The advent of new technologies in the field of medicine and dentistry is creating improvements that lead clinicians to have materials and procedures able to improve patients’ quality of life. The aim of this article is to evaluate occlusion load and its consequences on fixed implant-supported prosthesis. New materials have granted clinicians the possibility achieve great aesthetic results in dental prosthesis, and new procedures allow them to standardize and give precise and repeatable results, especially for the functional and long-term stability aspects of products. Some principles should be carefully evaluated and applied to every dental prosthesis; the evaluation of the forces and fitting of meso-structures to dental implants, an aspect that is often not well considered by clinicians, is the main focus of this article

Kephalometrische Ver\uc3\ua4nderungen bei Patienten mit erh\uc3\ub6hter vertikaler Dimension bei Behandlung mit einem Zervikal-Headgear

Purpose: The aim of the present study was to investigate the cephalometric changes in patients with increased vertical dimension after treatment with cervical headgear compared to controls. Methods: The sample of the present retrospective study consisted of 20 Class II patients (10\uc2\ua0males, 10 females; mean age 8.54\uc2\ua0\uc2\ub1\uc2\ua01.15\uc2\ua0years) with increased vertical dimension treated with cervical headgear (treatment group) and 21 Class II patients (11\uc2\ua0males, 10 females; mean age 8.41\uc2\ua0\uc2\ub1\uc2\ua01.15\uc2\ua0years) with increased vertical dimension who underwent no treatment (control group). Cephalograms were available for each subject at baseline (T1) and after treatment/observation time (T2) for both groups and cephalometric analysis allowed for evaluation of changes between time points and between groups. Results: Regarding facial axis, N-ANS/ANS-Me, and overbite, there were no negatively significant changes in the treated group showing no significant worsening in the vertical dimension. Regarding facial angle, there was a significant increase in the treated group between the time points and when compared to the control group, showing counterclockwise rotation of the mandible in the treated group. Conclusions: The vertical dimension was not significantly altered after cervical headgear treatment although the anterior facial height was higher at the beginning of treatment. There was significant counterclockwise rotation of the mandible, and clockwise rotation and distal displacement of the maxilla after treatment

Anxiety and Depression during the Second Wave of the COVID-19 Pandemic: The Role of Coping Strategies

Background: Evidence suggests increased anxious-depressive symptoms in the general population during the COVID-19 pandemic, also in its second wave. High symptom variability across individuals suggests that risk and protective factors, including coping strategies, can play a mediating role. Methods: General Anxiety Disorder-7, Patient Health Questionnaire-9, and Brief-COPE questionnaires were administered to people attending a COVID-19 point-of-care. Univariate and multivariate methods were used to test the association of symptoms with risk and protective factors. Results: A total of 3509 participants (27.5% with moderate-severe anxiety; 12% with depressive symptoms) were recruited. Sociodemographic and lifestyle factors, including age, sex, sleep, physical activity, psychiatric treatments, parenthood, employment, and religiosity were associated with affective symptoms. Avoidant (self-distraction, venting, behavioral disengagement) and approach (emotional support, self-blame but not positive reframing and acceptance) coping strategies predicted greater anxiety. Avoidant strategies, including venting, denial, behavioral disengagement, substance use, and self-blame, and the humor strategy were associated with more severe depressive symptoms, while the planning predicted the opposite. Conclusions: Coping strategies, in addition to socio-demographic and life-habit factors, could have contributed to modulating anxious and depressive symptoms during the second-wave of the COVID-19 pandemic, thus advocating for interventions aimed at promoting positive coping strategies to reduce the psychosocial toll of the pandemic

The Application of the Divine Proportion for the Construction of the Visualized Treatment Objective in Craniofacial Surgery

Aesthetics and function of maxillofacial district are closely related and could interfere with patient psychological conditions. The aim of this paper is to describe and to analyze the procedures necessary for a proper surgical visualized treatment objective (VTO) realization through the use of the tracing on lateral head film, applying the divine proportion (or golden ratio) in certain steps. The method described is easy to realize, cheap and help both orthodontist and maxillo-facial surgeon to communicate each other and to the patients. For the following article, digital research and handheld research on surgical VTO planning for patients with skeletal or dentoalveolar severe deformities managed by surgeons and orthodontics were used. The research included articles in English published on dental and maxillofacial surgery journals. The surgical VTO consists of a "previsualization" of the objectives in order to make the desired changes for the individual patient. The result can thus be visualized and pre-evaluated rather than just imagined by the mind's eye. To simplify the procedure, the surgical VTO has been divided into 11 steps. The accurate model of the surgical result is fundamental in the treatment of dentofacial deformities. These predictions are intended to guide the treatment towards the desired result, to give the patient a reasonable preview of the outcome, and to ensure communication between the orthodontist and the surgeon. This technique proves to be effective in planning surgical treatment and it allows the clinician to view changes before, during, and after orthognathic surgery. The skeletal, dental, and aesthetic complete cephalometric evaluation is the key point to the long-term success of the results