X-ray Spectral Investigation of Carbon Nanoshells

Carbon nanocapsules synthesized by plasma method in hexane were investigated using the ultra-soft X-ray emission spectroscopy method. It has been revealed that additional mixed π+σ-overlapping form in nanocapsules in a result of folding of graphene sheets. It has been found that in nanocapsules sp-hybrid bonds between carbon and residual iron atoms form when overlapping high-energy 3d+4s-states with spnhybrid orbitals (2<n<3). When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3530

Redox-promoted tailoring of the high-temperature electrical performance in Ca3Co4O9 thermoelectric materials by metallic cobalt addition

This paper reports a novel composite-based processing route for improving the electrical performance of Ca3Co4O9 thermoelectric (TE) ceramics. The approach involves the addition of metallic Co, acting as a pore filler on oxidation, and considers two simple sintering schemes. The (1-x)Ca3Co4O9/xCo composites (x = 0%, 3%, 6% and 9% vol.) have been prepared through a modified Pechini method, followed by one- and two-stage sintering, to produce low-density (one-stage, 1ST) and high-density (two-stage, 2ST) ceramic samples. Their high-temperature TE properties, namely the electrical conductivity (σ), Seebeck coefficient (α) and power factor (PF), were investigated between 475 and 975 K, in air flow, and related to their respective phase composition, morphology and microstructure. For the 1ST case, the porous samples (56%-61% of ρth) reached maximum PF values of around 210 and 140 μWm-1·K-2 for the 3% and 6% vol. Co-added samples, respectively, being around two and 1.3 times higher than those of the pure Ca3Co4O9 matrix. Although 2ST sintering resulted in rather dense samples (80% of ρth), the efficiency of the proposed approach, in this case, was limited by the complex phase composition of the corresponding ceramics, impeding the electronic transport and resulting in an electrical performance below that measured for the Ca3Co4O9 matrix (224 μWm-1·K-2 at 975K).publishe

Alkaline electrochemical reduction of a magnesium ferrospinel into metallic iron for the valorisation of magnetite-based metallurgical waste

The electrochemical reduction of iron oxides in alkaline media arises as a novel approach for ironmaking and iron-rich waste valorisation. Strong advantages and attractive aspects of alkaline electroreduction include lower electric energy consumption, absence of CO2 emissions, and non-polluting valuable by-products such as H2 and O2. Another potential advantage originates from the compatibility of this concept with intermittent renewable energies. However, to bring this technology to a competitive level, especially compared to the traditional steelmaking, innovative approaches and developments in materials processing and their appropriate integration into the electrolysis process are required. This research work explores the prospects for electrochemical reduction of a magnesium-containing ferrospinel, as a potential component in iron-containing wastes. The experimental approach considers bulk cathode- and suspension-based electrolysis concepts, which allow reaching 55% and 20% Faradaic efficiencies of the reduction to metallic iron, respectively. The effects imposed by the magnesium presence on the electroreduction kinetics, phase composition and morphology of the electroreduction products are evaluated and discussed. The obtained results open new perspectives for the recovery of metallurgical residues with low magnesium impurities content.publishe

Prospects for electrical performance tuning in Ca3Co4O9 materials by metallic Fe and Ni particles additions

This work further explores the possibilities for designing the high-temperature electrical performance of the thermoelectric Ca3Co4O9 phase, by a composite approach involving separate metallic iron and nickel particles additions, and by employing two different sintering schemes, capable to promote the controlled interactions between the components, encouraged by our recent promising results obtained for similar cobalt additions. Iron and nickel were chosen because of their similarities with cobalt. The maximum power factor value of around 200 µWm−1K−2 at 925 K was achieved for the composite with the nominal nickel content of 3% vol., processed via the twostep sintering cycle, which provides the highest densification from this work. The effectiveness of the proposed approach was shown to be strongly dependent on the processing conditions and added amounts of metallic particles. Although the conventional one-step approach results in Feand Ni-containing composites with the major content of the thermoelectric Ca3Co4O9 phase, their electrical performance was found to be significantly lower than for the Co-containing analogue, due to the presence of less-conducting phases and excessive porosity. In contrast, the relatively high performance of the composite with a nominal nickel content of 3% vol. processed via a two-step approach is related to the specific microstructural features from this sample, including minimal porosity and the presence of the Ca2Co2O5 phase, which partially compensate the complete decomposition of the Ca3Co4O9 matrix. The obtained results demonstrate different pathways to tailor the phase composition of Ca3Co4O9 -based materials, with a corresponding impact on the thermoelectric performance, and highlight the necessity of more controllable approaches for the phase composition tuning, including lower amounts and different morphologies of the dispersed metallic phases.publishe

Photocatalytic removal of benzene over Ti3C2Tx MXene and TiO2–MXene composite materials under solar and NIR irradiation

MXenes, a family of two-dimensional (2D) transition metal carbides, nitrides and carbonitrides based on earth-abundant constituents, are prospective candidates for energy conversion applications, including photocatalysis. While the activity of individual MXenes towards various photocatalytic processes is still debatable, these materials were proved to be excellent co-catalysts, accelerating the charge separation and suppressing the exciton recombination. Titanium-containing MXenes are well compatible with the classical TiO2 photocatalyst. The TiO2 component can be directly grown on MXene sheets by in situ oxidation, representing a mainstream processing approach for such composites. In this study, an essentially different approach has been implemented: a series of TiO2-MXene composite materials with controlled composition and both reference end members were prepared, involving two different strategies for mixing sol-gel-derived TiO2 nanopowder with the Ti3C2Tx component, which was obtained by HF etching of self-propagating high-temperature synthesis products containing modified MAX phase Ti3C2Alz (z > 1) with nominal aluminium excess. The prospects of such composites for the degradation of organic pollutants under simulated solar light, using benzene as a model system, were demonstrated and analysed in combination with their structural, microstructural and optical properties. A notable photocatalytic activity of bare MXene under near infrared light was discovered, suggesting further prospects for light-to-energy harvesting spanning from UV-A to NIR and applications in biomedical imaging and sensors.publishe

MXene-containing composite electrodes for hydrogen evolution: material design aspects and approaches for electrode fabrication

This work explores the possibilities for the processing of Ni- and Ti3C2Tx (T = OH, O) MXene-containing composite electrodes, by co-pressing and plastic deformation or by etching of the electrodes prepared directly by self-propagation high-temperature synthesis (SHS). Various material design approaches were also explored. In order to tune the Ti3C2 interlayer distance in Ti3C2Al MAX phase, an introduction of additional Al to form Ti3C2Alz materials with z > 1 was attempted. Self-propagation high-temperature synthesis of powder mixtures with extra Ni and Al content (e.g. Ni:Ti:Al:C = 1:2:3:1) resulted in SHS products containing Ti3C2Alz z > 1 material and Ni–Al alloys. Further etching of these products in 10M NaOH allowed the direct formation of electrodes with active surface containing Ti3C2Tx (T = OH, O) MXene- and Raney nickel-containing composites. The electrochemical studies were focused on hydrogen evolution and showed the potential for boosting the electrochemical reaction in Ni and MXene-containing composite electrodes, especially at high current densities. The guidelines for the processing of such electrodes under fluorine-free conditions are proposed and discussed.publishe

Strontium titanate and zinc-oxide-based materials for high-temperature thermoelectric harvesting

Broad societal needs have focused increased attention to providing a sustainable energy supply to the population, based on technologies with minimal environmental impact and reduced fossil fuels usage. One solution is to improve energy conversion efficiency in key consuming sectors. Since most of the energy (60-70%) used worldwide is discharged as waste heat, ”green” thermoelectric (TE) conversion has received considerable attention due to its intrinsic simplicity, employing no moving parts, silent operation, excellent scalability and reliability, and self-sufficiency to enable mobile or remote applications. In some energy-conversion scenarios, the cost and thermal stability requirements may dominate over efficiency issues, making abundant, high-temperature-stable and low-toxic oxides an interesting alternative TE material. This talk will feature some oxide-specific approaches towards tuning the thermoelectric performance in strontium titanate and zincoxide-based materials, including defects engineering and in-situ induced nanostructuring.publishe

Controlled Growth of Carbon Spheres Through the Mg-Reduction Route

Hollow spheres, hollow capsules and solid spheres of carbon were selectively synthesized by Mg-reduction of hexachlorobutadiene at appropriate reaction conditions. X-ray powder diffraction and Raman spectra reveal that the as-prepared materials have a well-ordered structure. A possible formation mechanism has been proposed

Quality of Graphite Target for Biological/Biomedical/Environmental Applications of 14C-Accelerator Mass Spectrometry

Catalytic graphitization for 14C-accelerator mass spectrometry (14C-AMS) produced various forms of elemental carbon. Our high-throughput Zn reduction method (C/Fe = 1:5, 500 °C, 3 h) produced the AMS target of graphite-coated iron powder (GCIP), a mix of nongraphitic carbon and Fe3C. Crystallinity of the AMS targets of GCIP (nongraphitic carbon) was increased to turbostratic carbon by raising the C/Fe ratio from 1:5 to 1:1 and the graphitization temperature from 500 to 585 °C. The AMS target of GCIP containing turbostratic carbon had a large isotopic fractionation and a low AMS ion current. The AMS target of GCIP containing turbostratic carbon also yielded less accurate/precise 14C-AMS measurements because of the lower graphitization yield and lower thermal conductivity that were caused by the higher C/Fe ratio of 1:1. On the other hand, the AMS target of GCIP containing nongraphitic carbon had higher graphitization yield and better thermal conductivity over the AMS target of GCIP containing turbostratic carbon due to optimal surface area provided by the iron powder. Finally, graphitization yield and thermal conductivity were stronger determinants (over graphite crystallinity) for accurate/precise/high-throughput biological, biomedical, and environmental14C-AMS applications such as absorption, distribution, metabolism, elimination (ADME), and physiologically based pharmacokinetics (PBPK) of nutrients, drugs, phytochemicals, and environmental chemicals

Multilayer indium saving ITO thin films produced by sputtering method

Low volume resistivity and high transmittance. Double-layered structures consisting of very thin layer of conventional indium tin oxide (In2O3-10 mass % SnO2) and indium saving indium-tin oxide (In2O3-50 mass % SnO2) layer were grown by DC sputtering on glass substrates preheated at 523 K. It was found that this method can produce polycrystalline ITO thin films having volume resistivity as low as 281 mu Omega cm, mobility 28 cm(2)/V.s and carrier concentration 5.32 10(20) cm(-3). Average optical transmittances exhibited above 85% in visible range of spectrum. Arithmetical mean height (S-a) and root mean square height (S-q) of films deposited at optimum conditions were 1.09 and 1.40 nm, respectively.New Energy and Industrial Technology Development Organization (NEDO