Onset of mechanical stability in random packings of frictional spheres

Using sedimentation to obtain precisely controlled packings of noncohesive spheres, we find that the volume fraction $\phi_{\rm RLP}$ of the loosest mechanically stable packing is in an operational sense well defined by a limit process. This random loose packing volume fraction decreases with decreasing pressure $p$ and increasing interparticle friction coefficient $\mu$. Using X-ray tomography to correct for a container boundary effect that depends on particle size, we find for rough particles in the limit $p \to 0$ a new lower bound, $\phi_{\rm RLP} = 0.550 \pm 0.001$.Comment: significantly revised, published versio

Quantitative properties of complex porous materials calculated from X-ray μCT images

A microcomputed tomography (μCT) facility and computational infrastructure developed at the Department of Applied Mathematics at the Australian National University is described. The current experimental facility is capable of acquiring 3D images made up of 20003 voxels on porous specimens up to 60 mm diameter with resolutions down to 2 μm. This allows the three-dimensional (3D) pore-space of porous specimens to be imaged over several orders of magnitude. The computational infrastructure includes the establishment of optimised and distributed memory parallel algorithms for image reconstruction, novel phase identification, 3D visualisation, structural characterisation and prediction of mechanical and transport properties directly from digitised tomographic images. To date over 300 porous specimens exhibiting a wide variety of microstructure have been imaged and analysed. In this paper, analysis of a small set of porous rock specimens with structure ranging from unconsolidated sands to complex carbonates are illustrated. Computations made directly on the digitised tomographic images have been compared to laboratory measurements. The results are in excellent agreement. Additionally, local flow, diffusive and mechanical properties can be numerically derived from solutions of the relevant physical equations on the complex geometries; an experimentally intractable problem. Structural analysis of data sets includes grain and pore partitioning of the images. Local granular partitioning yields over 70,000 grains from a single image. Conventional grain size, shape and connectivity parameters are derived. The 3D organisation of grains can help in correlating grain size, shape and orientation to resultant physical properties. Pore network models generated from 3D images yield over 100000 pores and 200000 throats; comparing the pore structure for the different specimens illustrates the varied topology and geometry observed in porous rocks. This development foreshadows a new numerical laboratory approach to the study of complex porous materials

Potato protein ingestion increases muscle protein synthesis rates at rest and during recovery from exercise in humans

Introduction Plant-derived proteins have received considerable attention as an alternative to animal-based proteins and are now frequently used in both plant-based diets and sports nutrition products. However, little information is available on the anabolic properties of potato-derived protein. This study compares muscle protein synthesis rates after the ingestion of 30 g potato protein versus 30 g milk protein at rest and during recovery from a single bout of resistance exercise in healthy, young males. Methods In a randomized, double-blind, parallel-group design, 24 healthy young males (24 ± 4 yr) received primed continuous l-[ring-13C6]-phenylalanine infusions while ingesting 30 g potato-derived protein or 30 g milk protein after a single bout of unilateral resistance exercise. Blood and muscle biopsies were collected for 5 h after protein ingestion to assess postprandial plasma amino acid profiles and mixed muscle protein synthesis rates at rest and during recovery from exercise. Results Ingestion of both potato and milk protein increased mixed muscle protein synthesis rates when compared with basal postabsorptive values (from 0.020% ± 0.011% to 0.053% ± 0.017%·h−1 and from 0.021% ± 0.014% to 0.050% ± 0.012%·h−1, respectively; P < 0.001), with no differences between treatments (P = 0.54). In the exercised leg, mixed muscle protein synthesis rates increased to 0.069% ± 0.019% and 0.064% ± 0.015%·h−1 after ingesting potato and milk protein, respectively (P < 0.001), with no differences between treatments (P = 0.52). The muscle protein synthetic response was greater in the exercised compared with the resting leg (P < 0.05). Conclusions Ingestion of 30 g potato protein concentrate increases muscle protein synthesis rates at rest and during recovery from exercise in healthy, young males. Muscle protein synthesis rates after the ingestion of 30 g potato protein do not differ from rates observed after ingesting an equivalent amount of milk protein

Potato Protein Ingestion Increases Muscle Protein Synthesis Rates at Rest and during Recovery from Exercise in Humans

INTRODUCTION: Plant-derived proteins have received considerable attention as an alternative to animal-based proteins and are now frequently used in both plant-based diets and sports nutrition products. However, little information is available on the anabolic properties of potato-derived protein. This study compares muscle protein synthesis rates after the ingestion of 30 g potato protein versus 30 g milk protein at rest and during recovery from a single bout of resistance exercise in healthy, young males. METHODS: In a randomized, double-blind, parallel-group design, 24 healthy young males (24 ± 4 yr) received primed continuous l-[ring-(13)C(6)]-phenylalanine infusions while ingesting 30 g potato-derived protein or 30 g milk protein after a single bout of unilateral resistance exercise. Blood and muscle biopsies were collected for 5 h after protein ingestion to assess postprandial plasma amino acid profiles and mixed muscle protein synthesis rates at rest and during recovery from exercise. RESULTS: Ingestion of both potato and milk protein increased mixed muscle protein synthesis rates when compared with basal postabsorptive values (from 0.020% ± 0.011% to 0.053% ± 0.017%·h(−1) and from 0.021% ± 0.014% to 0.050% ± 0.012%·h(−1), respectively; P < 0.001), with no differences between treatments (P = 0.54). In the exercised leg, mixed muscle protein synthesis rates increased to 0.069% ± 0.019% and 0.064% ± 0.015%·h(−1) after ingesting potato and milk protein, respectively (P < 0.001), with no differences between treatments (P = 0.52). The muscle protein synthetic response was greater in the exercised compared with the resting leg (P < 0.05). CONCLUSIONS: Ingestion of 30 g potato protein concentrate increases muscle protein synthesis rates at rest and during recovery from exercise in healthy, young males. Muscle protein synthesis rates after the ingestion of 30 g potato protein do not differ from rates observed after ingesting an equivalent amount of milk protein

The uptake of soluble and nanoparticulate imaging isotope in model liver tumours after intra-venous and intra-arterial administration

Delivery of chemotherapeutic drugs to tumours by reformulation as nanoparticles has often been proposed as a means of facilitating increased selective uptake, exploiting the increased permeability of the tumour vasculature. However realisation of this improvement in drug delivery in cancer patients has met with limited success. We have compared tumour uptake of soluble Tc99m-pertechnetate and a colloid of nanoparticles with a Tc99m core, using both intra-venous and intra-arterial routes of administration in a rabbit liver VX2 tumour model. The radiolabelled nanoparticles were tested both in untreated and cationised form. The results from this tumour model in an internal organ show a marked advantage in intra-arterial administration over the intra-venous route, even for the soluble isotope. Tumour accumulation of nanoparticles from arterial administration was augmented by cationisation of the nanoparticle surface with histone proteins, which consistently facilitated selective accumulation within microvessels at the periphery of tumours.Sources of support for this research: Sirtex Medical Ltd, Sydney Australia

IMAGING OF PORE SCALE DISTRIBUTION OF FLUIDS AND WETTABILITY

ABSTRACT Wettability has a profound effect on reservoir recovery and productivity. It determines the microscopic distribution of fluids in the pore-space which, in turn, determine important global multiphase properties such as capillary pressure, relative permeability, residual saturation and resistivity index. Complexities in pore-space geometry, rock-fluid and fluidfluid interactions have limited descriptions of wettability to highly simplified model systems and wettability in real porous systems remains a poorly understood phenomenon. This paper utilizes two new techniques which have the potential to greatly improve our understanding of wettability in real porous systems. The first is a technique to reproducibly clean and modify the surface energy of clastic and carbonate cores to produce well defined wettability states. The second is a technique for directly imaging the pore-scale distribution of fluids in reservoir cores using high resolution tomography and a newly developed 3D registration technique which allows voxel perfect alignment of a set of images of the same core. We present results for a preliminary study of drainage and imbibition in Fontainebleau sandstone, sucrosic dolomite and oomoldic grainstone cores at well defined wettability states using air and water to demonstrate the applicability of the techniques. The imaged fluid distributions show that gas is preferentially located in larger pores with water occupying smaller pores. The gas saturations measured compare well with those calculated from the imaged fluid distributions. The imaged pore-scale fluid distributions are also compared with predictions based on computations made directly on dry images of the pore-space and in equivalent network models. The computations use simple percolation concepts to model the pore-scale distributions. Drainage saturations and fluid distributions compare well with invasion percolation. Imbibition fluid distributions compare well with ordinary percolation. The comparisons show, for the first time, the feasibility of testing the validity of network models for multi-phase flow by directly comparing model fluid saturations with imaged saturations in real systems on a pore-to-pore basis

In vivo tumour imaging employing regional delivery of novel gallium radiolabelled polymer composites

Background: Understanding the regional vascular delivery of particles to tumour sites is a prerequisite for developing new diagnostic and therapeutic composites for treatment of oncology patients. We describe a novel imageable 67Ga-radiolabelled polymer composite that is biocompatible in an animal tumour model and can be used for preclinical imaging investigations of the transit of different sized particles through arterial networks of normal and tumour-bearing organs. Results: Radiolabelling of polymer microspheres with 67Ga was achieved using a simple mix and wash method, with tannic acid as an immobilising agent. Final in vitro binding yields after autoclaving averaged 94.7%. In vivo stability of the composite was demonstrated in New Zealand white rabbits by intravenous administration, and intrahepatic artery instillations were made in normal and VX2 tumour implanted rabbit livers. Stability of radiolabel was sufficient for rabbit lung and liver imaging over at least 3 hours and 1 hour respectively, with lung retention of radiolabel over 91%, and retention in both normal and VX2 implanted livers of over 95%. SPECT-CT imaging of anaesthetised animals and planar imaging of excised livers showed visible accumulation of radiolabel in tumours. Importantly, microsphere administration and complete liver dispersal was more easily achieved with 8 μm diameter MS than with 30 μm MS, and the smaller microspheres provided more distinct and localised tumour imaging. Conclusion: This method of producing 67Ga-radiolabelled polymer microspheres is suitable for SPECT-CT imaging of the regional vascular delivery of microspheres to tumour sites in animal models. Sharper distinction of model tumours from normal liver was obtained with smaller MS, and tumour resolution may be further improved by the use of 68Ga instead of 67Ga, to enable PET imaging.The ANU authors acknowledge the collaborative research project support generously provided to ANU by Sirtex Medical Ltd. (Sydney), including donation of a GE Hawkeye Infinia SPECT/CT scanner and a Xeleris image processing system

Pembuatan Kulit Atasan Sepatu Bebas Krom

The purpose of this study was to obtain the process formulation for leather tanning in manufacturing chrome-free upper leather. The tanning process used vegetable tanning material (mimosa), syntan, and combination of vegetable-syntan. The leather were prepared using 25, 30, and 35% of mimosa, 10, 15, and 20% of syntan, and 15:10; 15:15; and 20%:15% of mimosa:syntan. Chrome tanning material 6% was used as control. Based from the results of physical testing according to SNI 0234:2009, the resulting leather met the quality requirements for shoe upper leather. Tanning process with 20% syntan gave the best result

First shark from the late Devonian (Frasnian) gogo formation, Western Australia sheds new light on the development of tessellated calcified cartilage

Background: Living gnathostomes (jawed vertebrates) comprise two divisions, Chondrichthyes (cartilaginous fishes, including euchondrichthyans with prismatic calcified cartilage, and extinct stem chondrichthyans) and Osteichthyes (bony fishes including tetrapods). Most of the early chondrichthyan (‘shark’) record is based upon isolated teeth, spines, and scales, with the oldest articulated sharks that exhibit major diagnostic characters of the group—prismatic calcified cartilage and pelvic claspers in males—being from the latest Devonian, c. 360 Mya. This paucity of information about early chondrichthyan anatomy is mainly due to their lack of endoskeletal bone and consequent low preservation potential. Methodology/Principal Findings: Here we present new data from the first well-preserved chondrichthyan fossil from the early Late Devonian (ca. 380–384 Mya) Gogo Formation Lägerstatte of Western Australia. The specimen is the first Devonian shark body fossil to be acid-prepared, revealing the endoskeletal elements as three-dimensional undistorted units: Meckel’s cartilages, nasal, ceratohyal, basibranchial and possible epibranchial cartilages, plus left and right scapulocoracoids, as well as teeth and scales. This unique specimen is assigned to Gogoselachus lynnbeazleyae n. gen. n. sp.Conclusions/Significance: The Meckel’s cartilages show a jaw articulation surface dominated by an expansive cotylus, and a small mandibular knob, an unusual condition for chondrichthyans. The scapulocoracoid of the new specimen shows evidence of two pectoral fin basal articulation facets, differing from the standard condition for early gnathostomes which have either one or three articulations. The tooth structure is intermediate between the ‘primitive’ ctenacanthiform and symmoriiform condition, and more derived forms with a euselachian-type base. Of special interest is the highly distinctive type of calcified cartilage forming the endoskeleton, comprising multiple layers of nonprismatic subpolygonal tesserae separated by a cellular matrix, interpreted as a transitional step toward the tessellated prismatic calcified cartilage that is recognized as the main diagnostic character of the chondrichthyans