1,746 research outputs found
Jets as diagnostics of the circumstellar medium and the explosion energetics of supernovae: the case of Cas A
We present hydrodynamical models for the Cassiopeia A (Cas A) supernova
remnant and its observed jet / counter-jet system. We include the evolution of
the progenitor's circumstellar medium, which is shaped by a slow red supergiant
wind that is followed by a fast Wolf-Rayet (WR) wind.
The main parameters of the simulations are the duration of the WR phase and
the jet energy. We find that the jet is destroyed if the WR phase is
sufficiently long and a massive circumstellar shell has formed. We therefore
conclude that the WR phase must have been short (a few thousand yr), if present
at all. Since the actual jet length of Cas A is not known we derive a lower
limit for the jet energy, which is ~10^{48} erg. We discuss the implications
for the progenitor of Cas A and the nature of its explosion.Comment: 9 pages, 5 figures, ApJ accepted. Version with high resolution
figures available at http://www.phys.uu.nl/~schure/CasA_jet.pd
Photodissociation in proto-planetary nebulae. Hydrodynamical simulations and solutions for low-velocity multi-lobes
We explore the effects of photodissociation at the stages of post-asymptotic
giant branch stars to find a mechanism able to produce multi-polar shapes. We
perform two-dimensional gasdynamical simulations to model the effects of
photodissociation in proto-planetary nebulae. We find that post-asymptotic
giant branch stars with 7,000 K or hotter are able to photodissociate a large
amount of the circumstellar gas. We compute several solutions for nebulae with
low-velocity multi-lobes. We find that the early expansion of a dissociation
front is crucial to understand the number of lobes in proto-planetary nebulae.
A dynamical instability appears when cooling is included in the swept-up
molecular shell. This instability is similar to the one found in
photoionization fronts, and it is associated with the thin-shell Vishniac
instability. The dissociation front exacerbates the growth of the thin-shell
instability, creating a fast fragmentation in shells expanding into media with
power-law density distributions such as r^-2.Comment: 4 pages, 2 figures, acepted by A&A Letter
Recommended from our members
Imposing virtual origins on the velocity components in direct numerical simulations
The relative wall-normal displacement of the origin perceived by different components of near-wall turbulence is known to produce a change in drag. This effect is produced for instance by drag-reducing surfaces of small texture size like riblets and superhydrophobic surfaces. To facilitate the research on how these displacements alter near-wall turbulence, this paper studies different strategies to model such displacement effect through manipulated boundary conditions. Previous research has considered the effect of offsetting the virtual origins perceived by the tangential components of the velocity from the reference, boundary plane, where the wall-normal velocity was set to zero. These virtual origins are typically characterised by slip-length coefficients in Robin, slip-like boundary conditions. In this paper, we extend this idea and explore several techniques to define and implement virtual origins for all three velocity components on direct numerical simulations (DNSs) of channel flows, with special emphasis on the wall-normal velocity. The aim of this work is to provide a suitable foundation to extend the existing understanding on how these virtual origins affect the near-wall turbulence, and ultimately aid in the formulation of simplified models that capture the effect of complex surfaces on the overlying flow and on drag, without the need to resolve fully the turbulence and the surface texture. From the techniques tested, Robin boundary conditions for all three velocities are found to be the most satisfactory method to impose virtual origins, relating the velocity components to their respective wall-normal gradients linearly. Our results suggest that the effect of virtual origins on the flow, and hence the change in drag that they produce, can be reduced to an offset between the virtual origin perceived by the mean flow and that perceived by the overlying turbulence, and that turbulence remains otherwise smooth-wall-like, as proposed by Luchini (1996). The origin for turbulence, however, would not be set by the spanwise virtual origin alone, but by a combination of the spanwise and wall-normal origins. These observations suggest the need for an extension of Luchini’s virtual-origin theory to predict the change in drag, accounting for the wall-normal transpiration when its effect is not negligible
Turbulent drag reduction by anisotropic permeable substrates-analysis and direct numerical simulations
We explore the ability of anisotropic permeable substrates to reduce
turbulent skin-friction, studying the influence that these substrates have on
the overlying turbulence. For this, we perform DNSs of channel flows bounded by
permeable substrates. The results confirm theoretical predictions, and the
resulting drag curves are similar to those of riblets. For small
permeabilities, the drag reduction is proportional to the difference between
the streamwise and spanwise permeabilities. This linear regime breaks down for
a critical value of the wall-normal permeability, beyond which the performance
begins to degrade. We observe that the degradation is associated with the
appearance of spanwise-coherent structures, attributed to a
Kelvin-Helmholtz-like instability of the mean flow. This feature is common to a
variety of obstructed flows, and linear stability analysis can be used to
predict it. For large permeabilities, these structures become prevalent in the
flow, outweighing the drag-reducing effect of slip and eventually leading to an
increase of drag. For the substrate configurations considered, the largest drag
reduction observed is at a friction Reynolds number
Recommended from our members
Turbulent Drag Reduction Using Anisotropic Permeable Substrates.
The behaviour of turbulent flow over anisotropic permeable substrates is studied using linear stability analysis and direct numerical simulations (DNS). The flow within the permeable substrate is modelled using the Brinkman equation, which is solved analytically to obtain the boundary conditions at the substrate-channel interface for both the DNS and the stability analysis. The DNS results show that the drag-reducing effect of the permeable substrate, caused by preferential streamwise slip, can be offset by the wall-normal permeability of the substrate. The latter is associated with the presence of large spanwise structures, typically associated to a Kelvin-Helmholtz-like instability. Linear stability analysis is used as a predictive tool to capture the onset of these drag-increasing Kelvin-Helmholtz rollers. It is shown that the appearance of these rollers is essentially driven by the wall-normal permeability Ky+ . When realistic permeable substrates are considered, the transpiration at the substrate-channel interface is wavelength-dependent. For substrates with low Ky+ , the wavelength-dependent transpiration inhibits the formation of large spanwise structures at the characteristic scales of the Kelvin-Helmholtz-like instability, thereby reducing the negative impact of wall-normal permeability
Optimal design of an LCC-S WPT3 Z1 SAE J2954 compliant system, using NSGA-II with nested genetic algorithms for simultaneous local optimization
Wireless Power Transfer (WPT) for electric vehicles is one of the most promising methods that, given its advantages, will drive the deployment of electric vehicles. This paper presents a mathematical optimization method applied to the complete design of an LCC-S WPT3 Z1 11 kW system that complies with the SAE J2954 standard (Wireless Power Transfer for Light-Duty Plug-in/Electric Vehicles and Alignment Methodology, 2020). A design method based on three phases is proposed, allowing the complete inductor system, including ferrites shielding and compensation circuit components, to function in any relative primary and secondary position. In Phase 1, a multi-objective NSGA-II algorithm is designed, utilizing three nested genetic algorithms. The goal is simultaneously searching for the local optimum between the primary and secondary systems in three positions. This is achieved by modeling the circuit’s electrical and electromagnetic parameters with equations, enabling an iterative process with reduced computational time. The NSGA-II algorithm yields three scenarios: primary copper volume minimization, secondary copper volume minimization, and a compromise solution that optimizes the total volume. The result is then modeled in Phase 2 using a 3D finite element program that includes ferrite and optimal shielding, obtaining the values of inductances and mutual inductance in the three positions, as well as design data for manufacturing. This result is introduced in Phase 3 to optimize compensation circuit components using a second NSGA-II algorithm with three nested genetic algorithms. Again, three scenarios are obtained based on the desired system behavior and the optimal cost of the components. The result is validated through simulation with Matlab-Simulink and experimentally using a prototype constructed for this purpose
Optimal design of a Low-Cost SAE JA2954 compliant WPT system using NSGA-II
Wireless Power Transfer (WPT) systems for electric vehicle charging are one of the most promising methods that, given the advantages they bring, will help the desired deployment of electric vehicles. This paper presents a mathematical optimisation method applied to the design of an 11 kW S-S system that complies with the SAE J2954 standard. A proposal is made to calculate the electrical parameters of the circuit based on equations that are compared with the results obtained by simulation with finite elements and experimental measurements, achieving very tight results with a reduced computational time. The NSGA-II multi-objective genetic algorithm is then applied together with the secant method, defining three different scenarios: minimisation of the primary copper volume, minimisation of the secondary copper volume and a compromise solution optimising the total primary and secondary copper volume. The result is a set of Pareto optimal solutions, from which the one that meets the standard can be extracted that suits the designer’s needs
Morpho-kinematic analysis of the point-symmetric, bipolar planetary nebulae Hb 5 and K 3-17, a pathway to poly-polarity
The kinematics of the bipolar planetary nebulae Hb~5 and K 3-17 are
investigated in detail by means of a comprehensive set of spatially resolved
high spectral resolution, long-slit spectra. Both objects share particularly
interesting characteristics, such as a complex filamentary, rosette-type
nucleus, axial point-symmetry and very fast bipolar outflows. The kinematic
information of Hb~5 is combined with {\it HST} imagery to construct a detailed
3D model of the nebula using the code SHAPE. The model shows that the large
scale lobes are growing in a non-homologous way. The filamentary loops in the
core are proven to actually be secondary lobes emerging from what appears to be
a randomly punctured, dense, gaseous core and the material that forms the point
symmetric structure flows within the lobes with a distinct kinematic pattern
and its interaction with the lobes has had a shaping effect on them. Hb~5 and
K~3-17 may represent a class of fast evolving planetary nebulae that will
develop poly-polar characteristics once the nebular core evolves and expands.Comment: 19 pages, 8 figures. To appear in The Astrophysical Journa
- …