2,823 research outputs found
A high-power and fast charging Li-ion battery with outstanding cycle-life
Electrochemical energy storage devices based on Li-ion cells currently power almost all electronic devices and power tools. The development of new Li-ion cell configurations by incorporating innovative functional components (electrode materials and electrolyte formulations) will allow to bring this technology beyond mobile electronics and to boost performance largely beyond the state-of-the-art. Here we demonstrate a new full Li-ion cell constituted by a high-potential cathode material, i.e. LiNi0.5Mn1.5O4, a safe nanostructured anode material, i.e. TiO2, and a composite electrolyte made by a mixture of an ionic liquid suitable for high potential applications, i.e. Pyr1,4PF6, a lithium salt, i.e. LiPF6, and standard organic carbonates. The final cell configuration is able to reversibly cycle lithium for thousands of cycles at 1000 mAg-1 and a capacity retention of 65% at cycle 2000. © 2017 The Author(s)
Reproductive Phenology of Pterocladiella capillacea (Rhodophyta: Gelidiales) from Southern Baja California, Mexico
The abundance of vegetative and reproductive fronds of Pterocladiella
capillacea (Gelidiaceae) from an intertidal population at Lobos Point, on the Pacific
coast of southern Baja California, Mexico, was measured bimonthly between
March 1998 and January 1999. Fronds with tetrasporic sori occurred throughout
the year, although in low percentages with respect to the total amount of
fronds: monthly means ranged between 0.5% (May) and 6.0% (July). Fronds
with cystocarps and fronds with spermatangia were found only in January, with
even lower percentages: 0.15% and 0.10%, respectively. The overall predominance
of reproductive tetrasporophytic fronds over reproductive gametophytic
fronds is common in natural populations of the Gelidiaceae. Reproductive phenology,
however, varies widely within this family, even within the same species,
as is the case for P. capillacea. Little is known about factors affecting the reproductive
phenology of this cosmopolitan alga; field and laboratory studies are
needed to provide a reliable predictive framework
Hydrogen/Deuterium Exchange Measurements May Provide an Incomplete View of Protein Dynamics: a Case Study on Cytochrome
Many aspects of protein function rely on conformational fluctuations. Hydrogen/deuterium exchange (HDX) mass spectrometry (MS) provides a window into these dynamics. Despite the widespread use of HDX-MS, it remains unclear whether this technique provides a truly comprehensive view of protein dynamics. HDX is mediated by H-bond-opening/closing events, implying that HDX methods provide an H-bond-centric view. This raises the question if there could be fluctuations that leave the H-bond network unaffected, thereby rendering them undetectable by HDX-MS. We explore this issue in experiments on cytochrom
Experimental evaluation of the sound absorption and insulation of an innovative coating through different testing methods
Challenges and prospects of the role of solid electrolytes in the revitalization of lithium metal batteries
The scientific community is continuously committed to the search for new high energy electrochemical storage devices. In this regard, lithium metal batteries, due to their very high electrochemical energy storage capacity, appear to be a highly appealing choice. Unfortunately, the use of lithium metal as the anode may lead to some safety hazards due to its uneven deposition upon charging, resulting in dendrite growth and eventual shorting of the battery. This issue may be successfully addressed by using intrinsically safer electrolytes capable of establishing a physical barrier at the electrode interface. The most promising candidates are solid electrolytes, either polymeric or inorganic. The main purpose of this review is to describe the present status of worldwide research on these electrolyte materials together with a critical discussion of their transport properties and compatibility with metallic lithium, hoping to provide some general guidelines for the development of innovative and safe lithium metal batterie
Impedance tube measurements on the denorms round robin test material samples
The DENORMS Round Robin Test aims to study and improve the techniques used to determine the sound absorption coefficient of materials. Within this framework, samples taken from the same batch have been tested in both reverberation room and impedance tube. The latter technique presents some challenges in that the results may strongly depend on the specimen preparation and set-up. The purpose of this paper is to present the results obtained in custom-made impedance tube for the RRT set of materials. The tests have been carried out using a four-microphone impedance tube, according to the method outlined in the ASTM E2611-09 standard. The results obtained for the different parameters provided by the test, in particular the sound absorption coefficient and the sound transmission loss, are taken into account and discussed
Abundance data for invertebrate assemblages from intertidal mussel beds along the Atlantic Canadian coast
This data set describes the abundance of 50 invertebrate taxa found in intertidal mussel beds along the Atlantic Canadian coast. This information resulted from a regionalscale study that investigated the effects of wave exposure on the richness and composition of invertebrate assemblages from intertidal mussel beds. Abundance data are provided for taxa representing the Annelida, Arthropoda, Bryozoa, Chordata, Cnidaria, Echinodermata, Mollusca, Nematoda, Nemertea, and Platyhelminthes. The data characterize mussel beds from wave-sheltered and wave-exposed locations spanning 315 km of the coast of Nova Scotia. Univariate and multivariate analyses revealed that the compositional structure of these invertebrate assemblages differed markedly depending on wave exposure. Overall, because of its taxonomic diversity, the inclusion of data for basal, intermediate, and top trophic levels, and the coverage of two extremes of environmental stress, this data set could be useful to test broader aspects of ecological theory. Areas of ecology that could advance using this data set are those concerning environmental stress models of community organization, abundance–occupancy relationships, species co-occurrence, species abundance distributions, dominance and rarity, spatial scales of population and community variation, and distribution of functional and phylogenetic diversity. Use of this data set for academic or educational purposes is allowed as long as the data source is properly cited. When used for academic or educational purposes, this data set should be cited using the title of this Data Paper, the names of the authors, the year of publication, and the corresponding volume and article numbers
Principles at the basis of the denorms round robin test on the low frequency sound absorption measurements in reverberation rooms and impedance tube
In recent years low frequency measurements in building and room acoustics fields gained attention. Moreover the low frequency sound absorption coefficient (below 100 Hz) has always been difficult to determine and the results coming from different laboratories cannot always be compared. This paper describes the principles at the basis of the round robin test carried out in the framework of the DENORMS cost action (Designs for Noise Reducing Materials and Structures). The same samples have been measured in reverberation rooms and in impedance tube by the different laboratories participating to the Round Robin Test.status: accepte
Nanoporous carbons from hydrothermally treated biomass as anode materials for lithium ion batteries
Biomass is transformed to carbon nanoparticles with surface-end groups called ‘hydrochar’ (HC) by an efficient and green hydrothermal carbonization (HTC) method. Three different approaches are used to introduce porosity to the HC: sole heat treatment, traditional potassium hydroxide (KOH) activation,
and environmentally benign magnesium oxide (MgO) templating. All the resulting microporous materials are tested as Li-ion intercalation hosts in lithium cells by using an 1 M LiPF6 in EC/DMC electrolyte solution. They all show stable reversible capacities at elevated current rates (1C), closely comparable to the maximum theoretical capacity of graphite. Among all the materials studied, the HC-MA with a surface area of 150 m2 g1 and obtained by MgO templating of the hydrochar shows the best cycling performance in lithium cell at room temperature (307 mAh g1 at cycle 100 at 1C). The HC-600 with the highest degree of aromaticity/order, lowest content of oxygen functional groups and surface area of 250 m2 g1, obtained by heating the hydrochar at 600 C under inert atmosphere, shows the best power and overall performance with its ability to sustain high discharge/charge rates (1C, 2C, 5C, 10C, 20C). These electrochemical performances attained with materials of reasonable specific surface areas – obtained by green, low cost and practical strategies – can address the space limitations in Li-ion battery applications by improving
volumetric energy densities
The DENORMS Round Robin test: Measurement procedure and post-processing of time data
The DENORMS Round Robin Test (RRT) is intended to study and improve the techniques used for the determination of the sound absorption coefficient of materials, with particular focus on the low-frequency range and on measurements in reverberation rooms. It is well known that the main reason why it is difficult to extend the frequency range of interest below 100 Hz is the low modal density. The modal behavior of a room is dependent on its geometry and this is one of the reasons why a discrepancy of the results coming from different laboratories can be found even if the same material is tested. This paper describes the measurement procedure developed to allow uniform acquisition and post-processing of acoustic response data of laboratories participating in the RRT, with and without absorbing materials inside. The tests and the post-processing operations performed on the measured data are also discussed in the paper
- …