3,946 research outputs found

    Using piloted simulation to measure pilot workload of landing a helicopter on a small ship

    Get PDF
    When conducting landings to a ship's deck in strong winds, helicopter pilot workload is often dominated by the turbulence within the ship's airwake. Previous studies have shown that larger ships create more aggressive airwakes and simulated flight trials had shown that it can be easier to land to a smaller ship than a large one. However, there are helicopter-enabled ships that are less than 100m in length and these will have significantly greater ship motion in rough seas than a large ship. The study reported in this paper has used a motion-base flight simulator to evaluate the pilot workload when landing to three geometrically similar ships of lengths 100m, 150m and 200m. Ship motion software has been used to create realistic deck displacements for sea states 4, 5 and 6, which are consistent with the increasing wind speed over the deck. It has been shown that the 100m ship was the most difficult to land to, with deck motion being the limiting factor. The next most difficult ship to land to was the 200m ship, with airwake turbulence being the limiting factor. The 150m ship generated the lowest pilot workload. The study has demonstrated that when ship motion is excessive, as it will be with small ships in rough seas, pilot workload will be dominated by deck motion during a landing task, but as the ship gets larger and more stable, airwake disturbances will dominate. It is clear from this study that realistic ship motion is essential when using piloted flight simulation to conduct simulated ship-helicopter operations

    Do topical repellents divert mosquitoes within a community? Health equity implications of topical repellents as a mosquito bite prevention tool.

    Get PDF
    OBJECTIVES: Repellents do not kill mosquitoes--they simply reduce human-vector contact. Thus it is possible that individuals who do not use repellents but dwell close to repellent users experience more bites than otherwise. The objective of this study was to measure if diversion occurs from households that use repellents to those that do not use repellents. METHODS: The study was performed in three Tanzanian villages using 15%-DEET and placebo lotions. All households were given LLINs. Three coverage scenarios were investigated: complete coverage (all households were given 15%-DEET), incomplete coverage (80% of households were given 15%-DEET and 20% placebo) and no coverage (all households were given placebo). A crossover study design was used and coverage scenarios were rotated weekly over a period of ten weeks. The placebo lotion was randomly allocated to households in the incomplete coverage scenario. The level of compliance was reported to be close to 100%. Mosquito densities were measured through aspiration of resting mosquitoes. Data were analysed using negative binomial regression models. FINDINGS: Repellent-users had consistently fewer mosquitoes in their dwellings. In villages where everybody had been given 15%-DEET, resting mosquito densities were fewer than half that of households in the no coverage scenario (Incidence Rate Ratio [IRR]=0.39 (95% confidence interval [CI]: 0.25-0.60); p<0.001). Placebo-users living in a village where 80% of the households used 15%-DEET were likely to have over four-times more mosquitoes (IRR=4.17; 95% CI: 3.08-5.65; p<0.001) resting in their dwellings in comparison to households in a village where nobody uses repellent. CONCLUSIONS: There is evidence that high coverage of repellent use could significantly reduce man-vector contact but with incomplete coverage evidence suggests that mosquitoes are diverted from households that use repellent to those that do not. Therefore, if repellents are to be considered for vector control, strategies to maximise coverage are required

    Haploid selection, sex ratio bias, and transitions between sex-determining systems

    Get PDF
    Sex determination is remarkably dynamic; many taxa display shifts in the location of sex-determining loci or the evolution of entirely new sex-determining systems. Predominant theories for why we observe such transitions generally conclude that novel sex-determining systems are favoured by selection if they equalise the sex ratio or increase linkage with a locus that experiences different selection in males versus females. We use population genetic models to extend these theories in two ways: (1) We consider the dynamics of loci very tightly linked to the ancestral sex-determining loci, e.g., within the nonrecombining region of the ancestral sex chromosomes. Variation at such loci can favour the spread of new sex-determining systems in which the heterogametic sex changes (XY to ZW or ZW to XY) and the new sex-determining region is less closely linked (or even unlinked) to the locus under selection. (2) We consider selection upon haploid genotypes either during gametic competition (e.g., pollen competition) or meiosis (i.e., nonmendelian segregation), which can cause the zygotic sex ratio to become biased. Haploid selection can drive transitions between sex-determining systems without requiring selection to act differently in diploid males versus females. With haploid selection, we find that transitions between male and female heterogamety can evolve so that linkage with the sex-determining locus is either strengthened or weakened. Furthermore, we find that sex ratio biases may increase or decrease with the spread of new sex chromosomes, which implies that transitions between sex-determining systems cannot be simply predicted by selection to equalise the sex ratio. In fact, under many conditions, we find that transitions in sex determination are favoured equally strongly in cases in which the sex ratio bias increases or decreases. Overall, our models predict that sex determination systems should be highly dynamic, particularly when haploid selection is present, consistent with the evolutionary lability of this trait in many taxa

    Dental Microwear and Diet of the Plio-Pleistocene Hominin Paranthropus boisei

    Get PDF
    The Plio-Pleistocene hominin Paranthropus boisei had enormous, flat, thickly enameled cheek teeth, a robust cranium and mandible, and inferred massive, powerful chewing muscles. This specialized morphology, which earned P. boisei the nickname “Nutcracker Man”, suggests that this hominin could have consumed very mechanically challenging foods. It has been recently argued, however, that specialized hominin morphology may indicate adaptations for the consumption of occasional fallback foods rather than preferred resources. Dental microwear offers a potential means by which to test this hypothesis in that it reflects actual use rather than genetic adaptation. High microwear surface texture complexity and anisotropy in extant primates can be associated with the consumption of exceptionally hard and tough foods respectively. Here we present the first quantitative analysis of dental microwear for P. boisei. Seven specimens examined preserved unobscured antemortem molar microwear. These all show relatively low complexity and anisotropy values. This suggests that none of the individuals consumed especially hard or tough foods in the days before they died. The apparent discrepancy between microwear and functional anatomy is consistent with the idea that P. boisei presents a hominin example of Liem's Paradox, wherein a highly derived morphology need not reflect a specialized diet

    Ultra-strong Adhesion of Graphene Membranes

    Full text link
    As mechanical structures enter the nanoscale regime, the influence of van der Waals forces increases. Graphene is attractive for nanomechanical systems because its Young's modulus and strength are both intrinsically high, but the mechanical behavior of graphene is also strongly influenced by the van der Waals force. For example, this force clamps graphene samples to substrates, and also holds together the individual graphene sheets in multilayer samples. Here we use a pressurized blister test to directly measure the adhesion energy of graphene sheets with a silicon oxide substrate. We find an adhesion energy of 0.45 \pm 0.02 J/m2 for monolayer graphene and 0.31 \pm 0.03 J/m2 for samples containing 2-5 graphene sheets. These values are larger than the adhesion energies measured in typical micromechanical structures and are comparable to solid/liquid adhesion energies. We attribute this to the extreme flexibility of graphene, which allows it to conform to the topography of even the smoothest substrates, thus making its interaction with the substrate more liquid-like than solid-like.Comment: to appear in Nature Nanotechnolog

    Global institutions and local filtering: Introducing independent directors to Taiwanese corporate boards

    Get PDF
    Drawing on the idea of selective interaction between organizations and environments, the authors examine how organizations change their traditional practices when they are exposed to new institutional environments. In the context of corporate governance change in response to financial market globalization, they argue that global institutional influence is moderated by local corporate control contexts that function as filtering mechanisms. The authors empirically analyse the adoption of a new corporate governance practice, i.e., the initial introduction of independent directors, in Taiwanese public firms, where family governance has been a dominant governance model. The findings suggest that while firms exposed to US capital markets are more likely to adopt independent directors, this facilitating effect weakens when the firms are under strong family control and is amplified when they are unbound from local frameworks through the key leader???s education or their geographic context

    Negotiating professional and social voices in research principles and practice

    Get PDF
    This paper draws on work conducted for a qualitative interview based study which explores the gendered racialised and professional identifications of health and social care professionals. Participants for the project were drawn from the professional executive committees of recently formed Primary Care Trusts. The paper discusses how the feminist psychosocial methodological approach developed for the project is theoretically, practically and ethically useful in exploring the voices of those in positions of relative power in relation to both health and social care services and the social relations of gender and ethnicity. The approach draws on psychodynamic accounts of (defended) subjectivity and the feminist work of Carol Gilligan on a voice-centred relational methodology. Coupling the feminist with the psychosocial facilitates an emphasis on voice and dialogic communication between participant and researcher not always captured in psychosocial approaches which tend towards favouring the interviewer as ‘good listener’. This emphasis on dialogue is important in research contexts where prior and ongoing relationships with professional participants make it difficult and indeed undesirable for researchers to maintain silence

    Development and Demonstration of a Wireless Ultraviolet Sensing Network for Dose Monitoring and Operator Safety in Room Disinfection Applications

    Get PDF
    The use of mobile ultraviolet-C (UV-C) disinfection devices for the decontamination of surfaces in hospitals and other settings has increased dramatically in recent years. The efficacy of these devices relies on the UV-C dose they deliver to surfaces. This dose is dependent on the room layout, the shadowing, the position of the UV-C source, lamp degradation, humidity and other factors, making it challenging to estimate. Furthermore, since UV-C exposure is regulated, personnel in the room must not be exposed to UV-C doses beyond occupational limits. We proposed a systematic method to monitor the UV-C dose administered to surfaces during a robotic disinfection procedure. This was achieved using a distributed network of wireless UV-C sensors that provide real-time measurements to a robotic platform and operator. These sensors were validated for their linearity and cosine response. To ensure operators could safely remain in the area, a wearable sensor was incorporated to monitor the UV-C exposure of an operator, and it provided an audible warning upon exposure and, if necessary, ceased the UV-C emission from the robot. Enhanced disinfection procedures could then be conducted as items in the room could be rearranged during the procedure to maximise the UV-C fluence delivered to otherwise inaccessible surfaces while allowing UVC disinfection to occur in parallel with traditional cleaning. The system was tested for the terminal disinfection of a hospital ward. During the procedure, the robot was manually positioned in the room by the operator repeatedly, who then used feedback from the sensors to ensure the desired UV-C dose was achieved while also conducting other cleaning tasks. An analysis verified the practicality of this disinfection methodology while highlighting factors which could affect its adoption.</jats:p

    Variability in gene expression underlies incomplete penetrance

    Get PDF
    The phenotypic differences between individual organisms can often be ascribed to underlying genetic and environmental variation. However, even genetically identical organisms in homogeneous environments vary, indicating that randomness in developmental processes such as gene expression may also generate diversity. To examine the consequences of gene expression variability in multicellular organisms, we studied intestinal specification in the nematode Caenorhabditis elegans in which wild-type cell fate is invariant and controlled by a small transcriptional network. Mutations in elements of this network can have indeterminate effects: some mutant embryos fail to develop intestinal cells, whereas others produce intestinal precursors. By counting transcripts of the genes in this network in individual embryos, we show that the expression of an otherwise redundant gene becomes highly variable in the mutants and that this variation is subjected to a threshold, producing an ON/OFF expression pattern of the master regulatory gene of intestinal differentiation. Our results demonstrate that mutations in developmental networks can expose otherwise buffered stochastic variability in gene expression, leading to pronounced phenotypic variation.National Institutes of Health (U.S.). Pioneer AwardMathematical Sciences Postdoctoral Research Fellowships (DMS-0603392)National Institutes of Health (U.S.). Ruth L. Kirschstein National Research Service Award (5F32GM080966

    Presymptomatic risk assessment for chronic non-communicable diseases

    Get PDF
    The prevalence of common chronic non-communicable diseases (CNCDs) far overshadows the prevalence of both monogenic and infectious diseases combined. All CNCDs, also called complex genetic diseases, have a heritable genetic component that can be used for pre-symptomatic risk assessment. Common single nucleotide polymorphisms (SNPs) that tag risk haplotypes across the genome currently account for a non-trivial portion of the germ-line genetic risk and we will likely continue to identify the remaining missing heritability in the form of rare variants, copy number variants and epigenetic modifications. Here, we describe a novel measure for calculating the lifetime risk of a disease, called the genetic composite index (GCI), and demonstrate its predictive value as a clinical classifier. The GCI only considers summary statistics of the effects of genetic variation and hence does not require the results of large-scale studies simultaneously assessing multiple risk factors. Combining GCI scores with environmental risk information provides an additional tool for clinical decision-making. The GCI can be populated with heritable risk information of any type, and thus represents a framework for CNCD pre-symptomatic risk assessment that can be populated as additional risk information is identified through next-generation technologies.Comment: Plos ONE paper. Previous version was withdrawn to be updated by the journal's pdf versio
    corecore