18 research outputs found
INFLUENCE OF DIFFERENT SURFACE MATERIALS ON THE FOULING PROCESS IN A MICROSTRUCTURED HEAT EXCHANGER UNDER LAMINAR REGIME
Microstructure devices are well known for their excellent performance with regard to heat and mass transfer. Microstructured heat exchangers show significant advantages in comparison with conventional heat exchangers. The unique properties of a microreaction system show high overall heat transfer coefficients for example. Small characteristic dimensions are in the order of a few hundred μm (Schubert et al., 1998, 2001; Worz et al, 1998). Due to the small dimensions, an increased pressure drop is combined with excellent heat transfer properties. But the small channels are prone to fouling processes. The accumulation of crystalline deposits is a severe problem. An additional wall layer causes a decrease of the overall heat transfer coefficient. Therefore the attention has been directed to the reduction of possible fouling processes within the channels.
The fouling can be subdivided in two parts: First into the induction period and second into the so-called fouling period itself (Lund et al., 1981; Forster et al., 1999a, 1999b, and 2000).
For the investigations a special electrically heated micro heat exchanger with changeable foils of different surface materials (stainless steel, FEP, DLC) was developed. The foil temperature is electronically controlled to a constant level of 100°C.
A solution of calciumnitrate/sodiumhydrogencarbonate is pumped under laminar flow conditions through the channels of the microstructured part. The high temperature causes the precipitation of solid calciumcarbonate on the surface.
The results for all materials, the uncoated stainless steel and the DLC and FEP coated heat transfer surfaces, show typical fouling behaviour with an induction period, followed by an asymptotic built-up of the deposited calcium carbonate. The fouling plot of DLC and FEP coated heat transfer surfaces contradict the hypothesis that the use of such materials leads to much longer induction periods. There is no influence of the surface material found on the induction period and the gradient of the fouling period in the laminar flow regime
Recommended from our members
Microstructure devices for water evaporation
This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.Evaporation of liquids is of major interest for many topics in process engineering. One of these is chemical process engineering, where evaporation of liquids and generation of superheated steam is mandatory for numerous processes. Generally, this is performed by use of classical pool boiling and evaporation process equipment, providing relatively limited performance, or by other systems like falling-film evaporators. Due to the advantages of microstructure devices especially in chemical process engineering the interest in microstructure evaporators and steam generators have been increased through the last decade. In this publication different microstructure devices used for evaporation and generation of steam will be described. Starting with simple liquid-heated devices, different types of electrically powered devices containing micro channels as well as non-channel microstructures will be shown. While evaporation of liquids in crossflow and counterflow or co-current flow micro channel devices is possible, it is, in many cases, not possible to obtain superheated steam due to certain boundary conditions. Thus, a new design was proposed to obtain complete evaporation and superheating of the generated steam
METALLIC MICRO HEAT EXCHANGERS: PROPERTIES, APPLICATIONS AND LONG TERM STABILITY
Micro heat exchangers, which until recently have been implemented only at laboratory scale, are now being available for industrial applications. They are well known for their superior heat transfer properties due to the large surface-to-volume ratio. But there are little data available on the long term stability of these devices. In this paper application several application examples for micro heat exchangers made of stainless steel are presented. The devices consist of stainless steel foils providing numerous micro channels generated by mechanical micromachining or wet chemical etching. A number of the foils are arranged in a specific way and bonded together. Device property descriptions as well as some possible application examples show the potential of metallic microstructure devices. Results on two crossflow microstructure heat exchangers running in long term tests are presented. Both devices have been tested for more than 8000 hours each, using deionised water as test fluid. Experimental data on the heat transfer properties and the pressure drop are given and compared. It was found that the heat transfer capabilities were significantly decreased within the first few hundred hours of testing and then run into a saturation state. Performance degradation may be due to a fouling layer deposited on the heat exchange surface. Some other experimental applications in which fouling was expected to cause problems are described briefly
Recommended from our members
Residence time distribution of gas flows in microreactors: Measurement and model comparison
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.The optimization of microreactor designs for applications in chemical process engineering usually requires knowledge of the residence time distribution (RTD). The applicability of established models to microstructured reactors is currently under debate (Bošković et al. 2008, Günther et al. 2004, Stief et al. 2008). This work provides new experimental data on the residence time distributions of gas flows through different types of microstructured reactors and analyses the data with established RTD models. By this, the dispersion model was found to describe the RTD behavior of gas flow for a majority of the microstructured devices tested. The model could therefore be used to predict the RTD of those reactors.German Federal Ministry of Economics
and Technology (IGF Project 15495
Teststand Cometos. T. 1 Messungen Palettenlage - Verformungsmessungen unter statischer Last
Available from TIB Hannover: ZA 5141(4855) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEDEGerman