Prediction of the performance of pre-packed purification columns through machine learning

Pre‐packed columns have been increasingly used in process development and biomanufacturing thanks to their ease of use and consistency. Traditionally, packing quality is predicted through rate models, which require extensive calibration efforts through independent experiments to determine relevant mass transfer and kinetic rate constants. Here we propose machine learning as a complementary predictive tool for column performance. A machine learning algorithm, extreme gradient boosting, was applied to a large data set of packing quality (plate height and asymmetry) for pre‐packed columns as a function of quantitative parameters (column length, column diameter, and particle size) and qualitative attributes (backbone and functional mode). The machine learning model offered excellent predictive capabilities for the plate height and the asymmetry (90 and 93%, respectively), with packing quality strongly influenced by backbone (∼70% relative importance) and functional mode (∼15% relative importance), well above all other quantitative column parameters. The results highlight the ability of machine learning to provide reliable predictions of column performance from simple, generic parameters, including strategic qualitative parameters such as backbone and functionality, usually excluded from quantitative considerations. Our results will guide further efforts in column optimization, for example, by focusing on improvements of backbone and functional mode to obtain optimized packings

Observation-based modeling of ozone chemistry in the Seoul metropolitan area during the Korea-United States Air Quality Study (KORUS-AQ)

The Seoul Metropolitan Area (SMA) has a population of 24 million and frequently experiences unhealthy levels of ozone (O3). In this work, measurements taken during the Korea-United States Air Quality Study (KORUS-AQ, 2016) are used to explore regional gradients in O3 and its chemical precursors, and an observationally-constrained 0-D photochemical box model is used to quantify key aspects of O3 production including its sensitivity to precursor gases. Box model performance was evaluated by comparing modeled concentrations of select secondary species to airborne measurements. These comparisons indicate that the steady state assumption used in 0-D box models cannot describe select intermediate species, highlighting the importance of having a broad suite of trace gases as model constraints. When fully constrained, aggregated statistics of modeled O3 production rates agreed with observed changes in O3, indicating that the box model was able to represent the majority of O3 chemistry. Comparison of airborne observations between urban Seoul and a downwind receptor site reveal a positive gradient in O3 coinciding with a negative gradient in NOx, no gradient in CH2O, and a slight positive gradient in modeled rates of O3 production. Together, these observations indicate a radical-limited (VOC-limited) O3 production environment in the SMA. Zero-out simulations identified C7+ aromatics as the dominant VOC contributors to O3 production, with isoprene and anthropogenic alkenes making smaller but appreciable contributions. Simulations of model sensitivity to decreases in NOx produced results that were not spatially uniform, with large increases in O3 production predicted for urban Seoul and decreases in O3 production predicted for far-outlying areas. The policy implications of this work are clear: Effective O3 mitigation strategies in the SMA must focus on reducing local emissions of C7+ aromatics, while reductions in NOx emissions may increase O3 in some areas but generally decrease the regional extent of O3 exposure

Sources and characteristics of summertime organic aerosol in the Colorado Front Range: perspective from measurements and WRF-Chem modeling

Abstract. The evolution of organic aerosols (OAs) and their precursors in the boundary layer (BL) of the Colorado Front Range during the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ, July–August 2014) was analyzed by in situ measurements and chemical transport modeling. Measurements indicated significant production of secondary OA (SOA), with enhancement ratio of OA with respect to carbon monoxide (CO) reaching 0.085±0.003 µg m−3 ppbv−1. At background mixing ratios of CO, up to  ∼  1.8 µg m−3 background OA was observed, suggesting significant non-combustion contribution to OA in the Front Range. The mean concentration of OA in plumes with a high influence of oil and natural gas (O&G) emissions was  ∼  40 % higher than in urban-influenced plumes. Positive matrix factorization (PMF) confirmed a dominant contribution of secondary, oxygenated OA (OOA) in the boundary layer instead of fresh, hydrocarbon-like OA (HOA). Combinations of primary OA (POA) volatility assumptions, aging of semi-volatile species, and different emission estimates from the O&G sector were used in the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) simulation scenarios. The assumption of semi-volatile POA resulted in greater than a factor of 10 lower POA concentrations compared to PMF-resolved HOA. Including top-down modified O&G emissions resulted in substantially better agreements in modeled ethane, toluene, hydroxyl radical, and ozone compared to measurements in the high-O&G-influenced plumes. By including emissions from the O&G sector using the top-down approach, it was estimated that the O&G sector contributed to  <  5 % of total OA, but up to 38 % of anthropogenic SOA (aSOA) in the region. The best agreement between the measured and simulated median OA was achieved by limiting the extent of biogenic hydrocarbon aging and consequently biogenic SOA (bSOA) production. Despite a lower production of bSOA in this scenario, contribution of bSOA to total SOA remained high at 40–54 %. Future studies aiming at a better emissions characterization of POA and intermediate-volatility organic compounds (IVOCs) from the O&G sector are valuable

Using stable isotopes of hydrogen to quantify biogenic and thermogenic atmospheric methane sources: A case study from the Colorado Front Range

Global atmospheric concentrations of methane (CH4), a powerful greenhouse gas, are increasing, but because there are many natural and anthropogenic sources of CH4, it is difficult to assess which sources may be increasing in magnitude. Here we present a data set of δ2H-CH4 measurements of individual sources and air in the Colorado Front Range, USA. We show that δ2H-CH4, but not δ13C, signatures are consistent in air sampled downwind of landfills, cattle feedlots, and oil and gas wells in the region. Applying these source signatures to air in ground and aircraft samples indicates that at least 50% of CH4 emitted in the region is biogenic, perhaps because regulatory restrictions on leaking oil and natural gas wells are helping to reduce this source of CH4. Source apportionment tracers such as δ2H may help close the gap between CH4 observations and inventories, which may underestimate biogenic as well as thermogenic sources

Assessment of ocean color atmospheric correction methods and development of a regional ocean color operational dataset for the Baltic Sea based on Sentinel-3 OLCI

The Baltic Sea is characterized by large gradients in salinity, high concentrations of colored dissolved organic matter, and a phytoplankton phenology with two seasonal blooms. Satellite retrievals of chlorophyll-a concentration (chl-a) are hindered by the optical complexity of this basin and the reduced performance of the atmospheric correction in its highly absorbing waters. Within the development of a regional ocean color operational processing chain for the Baltic Sea based on Sentinel-3 Ocean and Land Colour Instrument (OLCI) full-resolution data, the performance of four atmospheric correction processors for the retrieval of remote-sensing reflectance (Rrs) was analyzed. Assessments based on three Aerosol Robotic Network-Ocean Color (AERONET-OC) sites and shipborne hyperspectral radiometers show that POLYMER was the best-performing processor in the visible spectral range, also providing a better spatial coverage compared with the other processors. Hence, OLCI Rrs spectra retrieved with POLYMER were chosen as input for a bio-optical ensemble scheme that computes chl-a as a weighted sum of different regional multilayer perceptron neural nets. This study also evaluated the operational Rrs and chl-a datasets for the Baltic Sea based on OC-CCI v.6. The chl-a retrievals based on OC-CCI v.6 and OLCI Rrs, assessed against in-situ chl-a measurements, yielded similar results (OC-CCI v.6: R2 = 0.11, bias = −0.22; OLCI: R2 = 0.16, bias = −0.03) using a common set of match-ups for the same period. Finally, an overall good agreement was found between chl-a retrievals from OLCI and OC-CCI v.6 although differences between Rrs were amplified in terms of chl-a estimates

Source Contributions to Carbon Monoxide Concentrations During KORUS‐AQ Based on CAM‐chem Model Applications

We investigate regional sources contributing to CO during the Korea United States Air Quality (KORUS-AQ) campaign conducted over Korea (1 May to 10 June 2016) using 17 tagged CO simulations from the Community Atmosphere Model with chemistry (CAM-chem). The simulations use three spatial resolutions, three anthropogenic emission inventories, two meteorological fields, and nine emission scenarios. These simulations are evaluated against measurements from the DC-8 aircraft and Measurements Of Pollution In The Troposphere (MOPITT). Results show that simulations using bottom-up emissions are consistently lower (bias: -34 to -39%) and poorer performing (Taylor skill: 0.38-0.61) than simulations using alternative anthropogenic emissions (bias: -6 to -33%; Taylor skill: 0.48-0.86), particularly for enhanced Asian CO and volatile organic compound (VOC) emission scenarios, suggesting underestimation in modeled CO background and emissions in the region. The ranges of source contributions to modeled CO along DC-8 aircraft from Korea and southern (90 degrees E to 123 degrees E, 20 degrees N to 29 degrees N), middle (90 degrees E to 123 degrees E, 29 degrees N to 38.5 degrees N), and northern (90 degrees E to 131.5 degrees E, 38.5 degrees N to 45 degrees N) East Asia (EA) are 6-13%, similar to 5%, 16-28%, and 9-18%, respectively. CO emissions from middle and northern EA can reach Korea via transport within the boundary layer, whereas those from southern EA are transported to Korea mainly through the free troposphere. Emission contributions from middle EA dominate during continental outflow events (29-51%), while Korean emissions play an overall more important role for ground sites (up to 25-49%) and plumes within the boundary layer (up to 25-44%) in Korea. Finally, comparisons with four other source contribution approaches (FLEXPART 9.1 back trajectory calculations driven by Weather Research and Forecasting (WRF) WRF inert tracer, China signature VOCs, and CO to CO2 enhancement ratios) show general consistency with CAM-chem.National Science Foundation (NSF); U.S. Department of Energy (DOE); National Aeronautics and Space Administration (NASA) Earth Observing System (EOS) Program; NCAR Advanced Study Program Postdoctoral Fellowship; Environment Research and Technology Development Fund of the Ministry of the Environment, Japan [2-1505, 2-1803]; National Science Foundation; NASA [NNX16AD96G, NNX16AE16G, NNX17AG39G]6 month embargo; published online: 1 February 2019This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

Evaluation of Internal Reference Genes for Quantitative Expression Analysis by Real-Time PCR in Ovine Whole Blood

The use of reference genes is commonly accepted as the most reliable approach to normalize qRT-PCR and to reduce possible errors in the quantification of gene expression. The most suitable reference genes in sheep have been identified for a restricted range of tissues, but no specific data on whole blood are available. The aim of this study was to identify a set of reference genes for normalizing qRT-PCR from ovine whole blood. We designed 11 PCR assays for commonly employed reference genes belonging to various functional classes and then determined their expression stability in whole blood samples from control and disease-stressed sheep. SDHA and YWHAZ were considered the most suitable internal controls as they were stably expressed regardless of disease status according to both geNorm and NormFinder software; furthermore, geNorm indicated SDHA/HPRT, YWHAZ/GAPDH and SDHA/YWHAZ as the best reference gene combinations in control, disease-stressed and combined sheep groups, respectively. Our study provides a validated panel of optimal control genes which may be useful for the identification of genes differentially expressed by qRT-PCR in a readily accessible tissue, with potential for discovering new physiological and disease markers and as a tool to improve production traits (e.g., by identifying expression Quantitative Trait Loci). An additional outcome of the study is a set of intron-spanning primer sequences suitable for gene expression experiments employing SYBR Green chemistry on other ovine tissues and cells