272 research outputs found
CW and pulsed electrically detected magnetic resonance spectroscopy at 263 GHz/12 T on operating amorphous silicon solar cells
Here we describe a new high frequency/high field continuous wave and pulsed
electrically detected magnetic resonance (CW EDMR and pEDMR) setup, operating
at 263 GHz and resonance fields between 0 and 12 T. Spin dependent transport in
illuminated hydrogenated amorphous silicon p-i-n solar cells at 5 K and 90 K
was studied by in operando 263 GHz CW and pEDMR alongside with complementary
X-band CW EDMR. Benefiting from the superior resolution at 263 GHz, we were
able to better resolve EDMR signals originating from spin dependent hopping and
recombination processes. 5 K EDMR spectra were found to be dominated by
conduction and valence band tale states involved in spin dependent hopping,
with additional contributions from triplet exciton states. 90 K EDMR spectra
could be assigned to spin pair recombination involving conduction band tail
states and dangling bonds as dominating spin dependent transport process, with
additional contributions from valence band tail and triplet exciton states.Comment: 8 pages, 4 figure
Motorcycle helmets: what about their coating?
In traffic accidents involving motorcycles, paint traces can be transferred from the rider's helmet or smeared onto its surface. These traces are usually in the form of chips or smears and are frequently collected for comparison purposes. This research investigates the physical and chemical characteristics of the coatings found on motorcycles helmets. An evaluation of the similarities between helmet and automotive coating systems was also performed.Twenty-seven helmet coatings from 15 different brands and 22 models were considered. One sample per helmet was collected and observed using optical microscopy. FTIR spectroscopy was then used and seven replicate measurements per layer were carried out to study the variability of each coating system (intravariability). Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) were also performed on the infrared spectra of the clearcoats and basecoats of the data set.
The most common systems were composed of two or three layers, consistently involving a clearcoat and basecoat. The coating systems of helmets with composite shells systematically contained a minimum of three layers. FTIR spectroscopy results showed that acrylic urethane and alkyd urethane were the most frequent binders used for clearcoats and basecoats. A high proportion of the coatings were differentiated (more than 95%) based on microscopic examinations. The chemical and physical characteristics of the coatings allowed the differentiation of all but one pair of helmets of the same brand, model and color. Chemometrics (PCA and HCA) corroborated classification based on visual comparisons of the spectra and allowed the study of the whole data set at once (i.e., all spectra of the same layer). Thus, the intravariability of each helmet and its proximity to the others (intervariability) could be more readily assessed. It was also possible to determine the most discriminative chemical variables based on the study of the PCA loadings. Chemometrics could therefore be used as a complementary decision-making tool when many spectra and replicates have to be taken into account.
Similarities between automotive and helmet coating systems were highlighted, in particular with regard to automotive coating systems on plastic substrates (microscopy and FTIR). However, the primer layer of helmet coatings was shown to differ from the automotive primer. If the paint trace contains this layer, the risk of misclassification (i.e., helmet versus vehicle) is reduced. Nevertheless, a paint examiner should pay close attention to these similarities when analyzing paint traces, especially regarding smears or paint chips presenting an incomplete layer system
Using rapid scan EPR to improve the detection limit of quantitative EPR by more than one order of magnitude
X band rapid scan EPR was implemented on a commercially available Bruker ELEXSYS E580 spectrometer. Room temperature rapid scan and continuous wave EPR spectra were recorded for amorphous silicon powder samples. By comparing the resulting signal intensities the feasibility of performing quantitative rapid scan EPR is demonstrated. For different hydrogenated amorphous silicon samples, rapid scan EPR results in signal to noise improvements by factors between 10 and 50. Rapid scan EPR is thus capable of improving the detection limit of quantitative EPR by at least one order of magnitude. In addition, we provide a recipe for setting up and calibrating a conventional pulsed and continuous wave EPR spectrometer for rapid scan EP
a FD-FT THz-EPR study
A combined X-band and frequency-domain Fourier-transform THz electron
paramagnetic resonance (FD-FT THz-EPR) approach has been employed to determine
heme Fe(III) S = 5/2 zero-field splitting (ZFS) parameters of frozen metHb and
metMb solutions, both with fluoro and aquo ligands. Frequency-domain EPR
measurements have been carried out by an improved synchrotron-based FD-FT THz-
EPR spectrometer. ZFS has been determined by field dependence of spin
transitions within the mS = ±1/2 manifold, for all four protein systems, and
by zero-field spin transitions between mS = ±1/2 and mS = ±3/2 levels, for
metHb and metMb flouro-states. FD-FT THz-EPR data were simulated with a novel
numerical routine based on Easyspin, which allows now for direct comparison of
EPR spectra in field and frequency domain. We found purely axial ZFSs of D =
5.0(1) cmâ1 (flouro-metMb), D = 9.2(4) cmâ1 (aquo-metMb), D = 5.1(1) cmâ1
(flouro-metHB) and D = 10.4(2) cmâ1 (aquo-metHb)
Order-disorder phase transition in a cliquey social network
We investigate the network model of community by Watts, Dodds and Newman (D.
J. Watts et al., Science 296 (2002) 1302) as a hierarchy of groups, each of 5
individuals. A homophily parameter controls the probability
proportional to of selection of neighbours against distance
. The network nodes are endowed with spin-like variables , with
Ising interaction . The Glauber dynamics is used to investigate the
order-disorder transition. The transition temperature is close to 3.8 for
and it falls down to zero above this value. The result provides
a mathematical illustration of the social ability to a collective action {\it
via} weak ties, as discussed by Granovetter in 1973.Comment: 10 pages, 7 figure
Radical Activation of NâH and OâH Bonds at Bismuth(II)
The development of unconventional strategies for the activation of ammonia (NH3) and water (H2O) is of capital importance for the advancement of sustainable chemical strategies. Herein we provide the synthesis and characterization of a radical equilibrium complex based on bismuth featuring an extremely weak BiâO bond, which permits the in situ generation of reactive Bi(II) species. The ensuing organobismuth(II) engages with various amines and alcohols and exerts an unprecedented effect onto the XâH bond, leading to low BDFEXâH. As a result, radical activation of various NâH and OâH bondsâincluding ammonia and waterâoccurs in seconds at room temperature, delivering well-defined Bi(III)-amido and -alkoxy complexes. Moreover, we demonstrate that the resulting Bi(III)âN complexes engage in a unique reactivity pattern with the triad of H+, Hâ, and Hâą sources, thus providing alternative pathways for main group chemistry
Impact of dislocations and dangling bond defects on the electrical performance of crystalline silicon thin films
A wide variety of liquid and solid phase crystallized silicon films are
investigated in order to determine the performance limiting defect types in
crystalline silicon thin-film solar cells. Complementary characterization
methods, such as electron spin resonance, photoluminescence, and electron
microscopy, yield the densities of dangling bond defects and dislocations
which are correlated with the electronic material quality in terms of solar
cell open circuit voltage. The results indicate that the strongly differing
performance of small-grained solid and large-grain liquid phase crystallized
silicon can be explained by intra-grain defects like dislocations rather than
grain boundary dangling bonds. A numerical model is developed containing both
defect types, dislocations and dangling bonds, describing the experimental
results
Single Chain Magnet Based on Cobalt II Thiocyanate as XXZ Spin Chain
The cobalt(II) in [Co(NCS)(2)(4-methoxypyridine)(2)](n) are linked by pairs of thiocyanate anions into linear chains. In contrast to a previous structure determination, two crystallographically independent cobalt(II) centers have been found to be present. In the antiferromagnetic state, below the critical temperature (T-c=3.94 K) and critical field (H-c=290 Oe), slow relaxations of the ferromagnetic chains are observed. They originate mainly from defects in the magnetic structure, which has been elucidated by micromagnetic Monte Carlo simulations and ac measurements using pristine and defect samples. The energy barriers of the relaxations are Delta(tau 1)=44.9(5) K and Delta(tau 2)=26.0(7) K for long and short spin chains, respectively. The spin excitation energy, measured by using frequency-domain EPR spectroscopy, is 19.1 cm(-1) and shifts 0.1 cm(-1) due to the magnetic ordering. Ab initio calculations revealed easy-axis anisotropy for both Co-II centers, and also an exchange anisotropy J(xx)/J(zz) of 0.21. The XXZ anisotropic Heisenberg model (solved by using the density renormalization matrix group technique) was used to reconcile the specific heat, susceptibility, and EPR data
- âŠ