Surface-enhanced Raman encoded polymer stabilized gold nanoparticles : demonstration of potential for use in bioassays

The preparation of biotinylated, self-assembled polymer stabilized gold nanoparticle hybrids encoded with a SERS active compound is described. The polymers used for nanoparticle stabilization are carefully designed for this purpose and are synthesized by the RAFT polymerization process, as the thiocarbonylthio end group provides a functional handle for anchoring the polymers to the gold surface. Functionalized biotin moieties are attached to the hybrid nanoparticles via Cu-catalyzed azide-alkyne cycloaddition. Binding of the biotinylated hybrid nanoparticles to streptavidin was confirmed by nanoparticle detection and identification by the SERS spectrum of the surface-bound SERS active compound, quinoline thiol. This investigation includes the requisites that constitute a bioassay, demonstrating the potential of polymer-coated hybrid nanoparticles for this purpose

Effect of scandium triflate on the RAFT copolymerization of methyl acrylate and vinyl acetate controlled by an acid/base “switchable” chain transfer agent

Modulation of the activity of an acid/base switchable dithiocarbamate RAFT agent, cyanomethyl (4-fluorophenyl)(pyridin-4-yl)carbamodithioate, with the Lewis acid scandium triflate (Sc(OTf)3) was investigated to examine the ability to deliver improved control over RAFT copolymerizations involving both more-activated and less-activated monomers—specifically the copolymerization of methyl acrylate (MA) and vinyl acetate (VAc). The introduction of either 0.5 or 1 mol equiv of Sc(OTf)3, with respect to RAFT agent, into a RAFT copolymerization of MA and VAc provides substantially improved control resulting in significantly reduced molar mass dispersities (Đ) (∼1.1–1.3) than achieved in its absence (Đ ∼ 1.3–1.4). Furthermore, similar introduction of Sc(OTf)3 into MA homopolymerization mediated by the same RAFT agent also delivered polymers of very low Đ (∼1.15). Sc(OTf)3 was also found to lower the rate of polymerization and alter the copolymerization reactivity ratios for MA and VAc. Increasing the Lewis acid concentration provides enhanced incorporation of the less active monomer, VAc, into the copolymers ([Sc(OTf)3]/[RAFT] = 0, rMA = 4.04, rVAc = 0.032; [Sc(OTf)3]/[RAFT] = 0.5, rMA = 3.08, rVAc = 0.17; [Sc(OTf)3]/[RAFT] = 1, rMA = 2.68, rVAc = 0.62). Carbon nuclear magnetic resonance (13C NMR) and differential scanning calorimetry (DSC) analysis of preparative samples confirm the enhanced VAc incorporation with increased levels of Sc(OTf)3. Importantly the inclusion of Sc(OTf)3 does not deleteriously affect the thiocarbonylthio end-groups of the RAFT polymers, with high end-group fidelity being observed in all copolymerizations

The white-rot fungus, Phanerochaete chrysosporium, under combinatorial stress produces variable oil profiles following analysis of secondary metabolites

Aims: The effects of combinatorial stress on lipid production in Phanerochaete chrysosporium remains understudied. This species of white‐rot fungi was cultivated on solid‐state media whilst under variable levels of known abiotic and biotic stressors to establish the effect upon fungal oil profiles. Methods and Results: Environmental stressors induced upon the fungus included: temperature; nutrient limitation; and interspecies competition to assess impact upon oil profiles. Fatty acid type and concentration was determined using analytical methods of Gas Chromatography and Mass Spectrometry. Growth rate under stress was established using High Performance Liquid Chromatography with ergosterol as the biomarker. Fungi grown on solid‐state agar were able to simultaneously produce short and long‐chain fatty acids which appeared to be influenced by nutritional composition as well as temperature. Addition of nitrogen supplements increased the growth rate, but lipid dynamics remained unchanged. Introducing competition‐induced stress had significantly altered the production of certain fatty acids beyond that of the monoculture whilst under nutrient‐limiting conditions. Linoleic acid concentrations, for example, increased from an average of 885 ng/μl at monoculture towards 13820 ng/μl at co‐culture, following 7 days of incubation. Conclusions: Interspecies competition produced the most notable impact on lipid production for solid‐state media cultivated fungi whilst the addition of nitrogen supplementation presented growth and lipid accumulation to be uncorrelated. Combinatorial stress therefore influences the yield of overall lipid production as well as the number of intermediate fatty acids produced, deriving similar oil profiles to the composition of vegetable and fish oils. Significance and Impact of Study: Fungal secondary metabolism remains highly sensitive following combinatorial stress. The outcome impacts the research towards optimising fungal oil profiles for biomass and nutrition. Future investigations on fungal stress tolerance mechanisms need to address these environmental factors throughout the experimental design

An alternative approach to the analysis of Si-doped DLC coatings deposited with different bias voltage

A series of diamond-like carbon (DLC) coatings were deposited with increasing bias voltage using magnetron sputtering techniques. Structural changes were observed in the sp2-configuration across the films which were accompanied by a slight increase in the sp3 fraction. With an increasing bias voltage, the thermal stability of the coatings increased from 300 to 450 °C. Oxygen diffusion was observed through the coating as a result of the high-temperature annealing and found to slow down with increasing bias voltage. Coefficients of friction (COF) remained stable with temperature for the individual coatings, with the softer films reporting the lowest COF. Our approach employed Raman spectroscopy to map the wear tracks at different temperatures, providing a deeper understanding of the coating performance and suggested maximum flash temperatures endured during testing

Influence of the tetraalkoxysilane crosslinker on the properties of polysiloxane-based elastomers prepared by the Lewis acid-catalysed Piers-Rubinsztajn reaction

This is an accepted manuscript of an article published by Royal Society of Chemistry in Polymer Chemistry, available online: https://doi.org/10.1039/D1PY00872B The accepted version of the publication may differ from the final published version.We investigate the preparation of polysiloxane-based networks under solvent-free, ambient conditions using the Lewis acid catalysed Piers-Rubinsztajn (PR) reaction of hydride-terminated siloxanes with various tetrafunctional alkoxysilanes (tetraethoxysilane, tetrapropoxysilane, tetra-n-buxoxysilane, tetra-s-butoxysilane, tetra-s-butoxysilane, and tetrakis(2- ethylbutoxy)silane) as crosslinkers. We explore the effects of polysiloxane chain length and crosslinker alkyl group on the rheological performance of the elastomers. By analysing the reaction progress by grazing angle Fourier-transform infrared spectroscopy (FTIR) and determining the rheological properties of the resulting materials, we show that the use of linear or branched alkoxysilanes strongly influences the morphology and properties of these network polymers. We have shown the PR process is can be tailored to reliably produce homogeneous, polysiloxane network materials. This work provides information on the relative rates of network formation under ambient conditions with an emphasis on the impact of crosslinker alkyl chain length. Our results show that electronics and s terics both play critical roles in influencing the the rate of the curing reaction. Crucially, we newly demonstrate the benefit of a having tertiary carbon α to the SiO reaction centre, as is the case for the tetra-s-butoxysilane crosslinker, for delivering exceptionally rapid network cure and a concomitant enhancement in storage modulus of the resultant materials

Near-infrared autofluorescence induced by intraplaque hemorrhage and heme degradation as marker for high-risk atherosclerotic plaques

Atherosclerosis is a major cause of mortality and morbidity, which is mainly driven by complications such as myocardial infarction and stroke. These complications are caused by thrombotic arterial occlusion localized at the site of high-risk atherosclerotic plaques, of which early detection and therapeutic stabilization are urgently needed. Here we show that near-infrared autofluorescence is associated with the presence of intraplaque hemorrhage and heme degradation products, particularly bilirubin by using our recently created mouse model, which uniquely reflects plaque instability as seen in humans, and human carotid endarterectomy samples. Fluorescence emission computed tomography detecting near-infrared autofluorescence allows in vivo monitoring of intraplaque hemorrhage, establishing a preclinical technology to assess and monitor plaque instability and thereby test potential plaque-stabilizing drugs. We suggest that near-infrared autofluorescence imaging is a novel technology that allows identification of atherosclerotic plaques with intraplaque hemorrhage and ultimately holds promise for detection of high-risk plaques in patients

Effect of chromium doping on high temperature tribological properties of silicon-doped diamond-like carbon films

Amorphous carbon films were deposited by means of closed-field unbalanced magnetron sputtering (CFUBMS). The silicon content was fixed at 1.3 at. %, while the chromium content was increased by modification of the current applied to the chromium magnetrons, with two doping levels, 0.3 and 2.7 at. %. Both, hardness and thermal stability were found to decrease as result of increasing chromium. Ball-on-disk tests revealed friction coefficients of 0.06 at room temperature with similar specific wear rate in all films (~4 × 10−13 m3 N−1 m−1). Increasing annealing temperatures were found to reduce the coefficient of friction compared to room temperature values, while increasing the specific wear rate for all films

Entospletinib with decitabine in acute myeloid leukemia with mutant TP53 or complex karyotype: A phase 2 substudy of the Beat AML Master Trial

BackgroundPatients with acute myeloid leukemia (AML) who have tumor protein p53 (TP53) mutations or a complex karyotype have a poor prognosis, and hypomethylating agents are often used. The authors evaluated the efficacy of entospletinib, an oral inhibitor of spleen tyrosine kinase, combined with decitabine in this patient population.MethodsThis was a multicenter, open-label, phase 2 substudy of the Beat AML Master Trial (ClinicalTrials.gov identifier NCT03013998) using a Simon two-stage design. Eligible patients aged 60 years or older who had newly diagnosed AML with mutations in TP53 with or without a complex karyotype (cohort A; n = 45) or had a complex karyotype without TP53 mutation (cohort B; n = 13) received entospletinib 400 mg twice daily with decitabine 20 mg/m2 on days 1-10 every 28 days for up to three induction cycles, followed by up to 11 consolidation cycles, in which decitabine was reduced to days 1-5. Entospletinib maintenance was given for up to 2 years. The primary end point was complete remission (CR) and CR with hematologic improvement by up to six cycles of therapy.ResultsThe composite CR rates for cohorts A and B were 13.3% (95% confidence interval, 5.1%-26.8%) and 30.8% (95% confidence interval, 9.1%-61.4%), respectively. The median duration of response was 7.6 and 8.2 months, respectively, and the median overall survival was 6.5 and 11.5 months, respectively. The study was stopped because the futility boundary was crossed in both cohorts.ConclusionsThe combination of entospletinib and decitabine demonstrated activity and was acceptably tolerated in this patient population; however, the CR rates were low, and overall survival was short. Novel treatment strategies for older patients with TP53 mutations and complex karyotype remain an urgent need

Canagliflozin and renal outcomes in type 2 diabetes and nephropathy

BACKGROUND Type 2 diabetes mellitus is the leading cause of kidney failure worldwide, but few effective long-term treatments are available. In cardiovascular trials of inhibitors of sodium–glucose cotransporter 2 (SGLT2), exploratory results have suggested that such drugs may improve renal outcomes in patients with type 2 diabetes. METHODS In this double-blind, randomized trial, we assigned patients with type 2 diabetes and albuminuric chronic kidney disease to receive canagliflozin, an oral SGLT2 inhibitor, at a dose of 100 mg daily or placebo. All the patients had an estimated glomerular filtration rate (GFR) of 30 to <90 ml per minute per 1.73 m2 of body-surface area and albuminuria (ratio of albumin [mg] to creatinine [g], >300 to 5000) and were treated with renin–angiotensin system blockade. The primary outcome was a composite of end-stage kidney disease (dialysis, transplantation, or a sustained estimated GFR of <15 ml per minute per 1.73 m2), a doubling of the serum creatinine level, or death from renal or cardiovascular causes. Prespecified secondary outcomes were tested hierarchically. RESULTS The trial was stopped early after a planned interim analysis on the recommendation of the data and safety monitoring committee. At that time, 4401 patients had undergone randomization, with a median follow-up of 2.62 years. The relative risk of the primary outcome was 30% lower in the canagliflozin group than in the placebo group, with event rates of 43.2 and 61.2 per 1000 patient-years, respectively (hazard ratio, 0.70; 95% confidence interval [CI], 0.59 to 0.82; P=0.00001). The relative risk of the renal-specific composite of end-stage kidney disease, a doubling of the creatinine level, or death from renal causes was lower by 34% (hazard ratio, 0.66; 95% CI, 0.53 to 0.81; P<0.001), and the relative risk of end-stage kidney disease was lower by 32% (hazard ratio, 0.68; 95% CI, 0.54 to 0.86; P=0.002). The canagliflozin group also had a lower risk of cardiovascular death, myocardial infarction, or stroke (hazard ratio, 0.80; 95% CI, 0.67 to 0.95; P=0.01) and hospitalization for heart failure (hazard ratio, 0.61; 95% CI, 0.47 to 0.80; P<0.001). There were no significant differences in rates of amputation or fracture. CONCLUSIONS In patients with type 2 diabetes and kidney disease, the risk of kidney failure and cardiovascular events was lower in the canagliflozin group than in the placebo group at a median follow-up of 2.62 years

Emulsion-templated porous polymers prepared by thiol-ene and thiol-yne photopolymerisation using multifunctional acrylate and non-acrylate monomers

The chemical and mechanical properties of macroporous polymer substrates play a crucial role in the determination of their end-application. The preparation of highly (macro)porous monolithic polymers (polyHIPEs) by emulsion templating and thiol-ene/yne photopolymerisation, using multifunctional acrylate, allyl ether and alkyne-based monomers with trimethylolpropane tris (3-mercaptopropionate) (TMPTMP), is described in this work. Issues associated with monomer solubility and/or stability of the produced high internal phase emulsions (HIPEs) are tackled. Scanning electron microscopy (SEM) is used to study the morphology and porosity (average void diameters) of the obtained materials. Due to the nature of the photoinitiated thiol-ene reactions, materials obtained from acrylate monomers display residual thiols that are quantified by a colourimetric (Ellman's) assay. Raman spectroscopy is also shown to be a complementary technique to evaluate the residual thiol content. The influence of the monomer functionality on the mechanical properties of the material is explored using compression tests. Significant differences in the surface functionality and mechanical behavior between materials prepared with comonomers able to homopolymerise (acrylates) and those unable to homopolymerise (allyl ethers; alkynes) are demonstrated