The Sedimentary Carbon-Sulfur-Iron Interplay – A Lesson From East Anglian Salt Marsh Sediments

We explore the dynamics of the subsurface sulfur, iron and carbon cycles in salt marsh sediments from East Anglia, United Kingdom. We report measurements of pore fluid and sediment geochemistry, coupled with results from laboratory sediment incubation experiments, and develop a conceptual model to describe the influence of bioturbation on subsurface redox cycling. In the studied sediments the subsurface environment falls into two broadly defined geochemical patterns – iron-rich sediments or sulfide-rich sediments. Within each sediment type nearly identical pore fluid and solid phase geochemistry (in terms of concentrations of iron, sulfate, sulfide, dissolved inorganic carbon (DIC), and the sulfur and oxygen isotope compositions of sulfate) are observed in sediments that are hundreds of kilometers apart. Strictly iron-rich and strictly sulfide-rich sediments, despite their substantive geochemical differences, are observed within spatial distances of less than five meters. We suggest that this bistable system results from a series of feedback reactions that determine ultimately whether sediments will be sulfide-rich or iron-rich. We suggest that an oxidative cycle in the iron-rich sediment, driven by bioirrigation, allows rapid oxidation of organic matter, and that this irrigation impacts the sediment below the immediate physical depth of bioturbation. This oxidative cycle yields iron-rich sediments with low total organic carbon, dominated by microbial iron reduction and no methane production. In the absence of bioirrigation, sediments in the salt marsh become sulfide-rich with high methane concentrations. Our results suggest that the impact of bioirrigation not only drives recycling of sedimentary material but plays a key role in sedimentary interactions among iron, sulfur and carbon

A year of genomic surveillance reveals how the SARS-CoV-2 pandemic unfolded in Africa.

The progression of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic in Africa has so far been heterogeneous, and the full impact is not yet well understood. In this study, we describe the genomic epidemiology using a dataset of 8746 genomes from 33 African countries and two overseas territories. We show that the epidemics in most countries were initiated by importations predominantly from Europe, which diminished after the early introduction of international travel restrictions. As the pandemic progressed, ongoing transmission in many countries and increasing mobility led to the emergence and spread within the continent of many variants of concern and interest, such as B.1.351, B.1.525, A.23.1, and C.1.1. Although distorted by low sampling numbers and blind spots, the findings highlight that Africa must not be left behind in the global pandemic response, otherwise it could become a source for new variants

The evolving SARS-CoV-2 epidemic in Africa: Insights from rapidly expanding genomic surveillance.

Investment in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sequencing in Africa over the past year has led to a major increase in the number of sequences that have been generated and used to track the pandemic on the continent, a number that now exceeds 100,000 genomes. Our results show an increase in the number of African countries that are able to sequence domestically and highlight that local sequencing enables faster turnaround times and more-regular routine surveillance. Despite limitations of low testing proportions, findings from this genomic surveillance study underscore the heterogeneous nature of the pandemic and illuminate the distinct dispersal dynamics of variants of concern-particularly Alpha, Beta, Delta, and Omicron-on the continent. Sustained investment for diagnostics and genomic surveillance in Africa is needed as the virus continues to evolve while the continent faces many emerging and reemerging infectious disease threats. These investments are crucial for pandemic preparedness and response and will serve the health of the continent well into the 21st century

The evolving SARS-CoV-2 epidemic in Africa: Insights from rapidly expanding genomic surveillance

INTRODUCTION Investment in Africa over the past year with regard to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sequencing has led to a massive increase in the number of sequences, which, to date, exceeds 100,000 sequences generated to track the pandemic on the continent. These sequences have profoundly affected how public health officials in Africa have navigated the COVID-19 pandemic. RATIONALE We demonstrate how the first 100,000 SARS-CoV-2 sequences from Africa have helped monitor the epidemic on the continent, how genomic surveillance expanded over the course of the pandemic, and how we adapted our sequencing methods to deal with an evolving virus. Finally, we also examine how viral lineages have spread across the continent in a phylogeographic framework to gain insights into the underlying temporal and spatial transmission dynamics for several variants of concern (VOCs). RESULTS Our results indicate that the number of countries in Africa that can sequence the virus within their own borders is growing and that this is coupled with a shorter turnaround time from the time of sampling to sequence submission. Ongoing evolution necessitated the continual updating of primer sets, and, as a result, eight primer sets were designed in tandem with viral evolution and used to ensure effective sequencing of the virus. The pandemic unfolded through multiple waves of infection that were each driven by distinct genetic lineages, with B.1-like ancestral strains associated with the first pandemic wave of infections in 2020. Successive waves on the continent were fueled by different VOCs, with Alpha and Beta cocirculating in distinct spatial patterns during the second wave and Delta and Omicron affecting the whole continent during the third and fourth waves, respectively. Phylogeographic reconstruction points toward distinct differences in viral importation and exportation patterns associated with the Alpha, Beta, Delta, and Omicron variants and subvariants, when considering both Africa versus the rest of the world and viral dissemination within the continent. Our epidemiological and phylogenetic inferences therefore underscore the heterogeneous nature of the pandemic on the continent and highlight key insights and challenges, for instance, recognizing the limitations of low testing proportions. We also highlight the early warning capacity that genomic surveillance in Africa has had for the rest of the world with the detection of new lineages and variants, the most recent being the characterization of various Omicron subvariants. CONCLUSION Sustained investment for diagnostics and genomic surveillance in Africa is needed as the virus continues to evolve. This is important not only to help combat SARS-CoV-2 on the continent but also because it can be used as a platform to help address the many emerging and reemerging infectious disease threats in Africa. In particular, capacity building for local sequencing within countries or within the continent should be prioritized because this is generally associated with shorter turnaround times, providing the most benefit to local public health authorities tasked with pandemic response and mitigation and allowing for the fastest reaction to localized outbreaks. These investments are crucial for pandemic preparedness and response and will serve the health of the continent well into the 21st century

Quantitative Analyse der Trocknungsverläufe von Katalysatordispersionen

The production of electrodes for their application in electrolyzers and fuel cells is based on the production of a catalyst-containing, aqueous-alcoholic dispersion. This is processed into a wet layer which, finally, forms the electrode. Many processes before and after the coating are well studied. There is no doubt about the continuous change in the chemical and physical properties in the layer. However, the drying process of the wet layer produced is rarely documented in the literature. This work focuses on the design, development and characterization of a first tool to analyze the chemical composition during the drying process. To quantify the measurement uncertainty statistical methods were used. The calculated standard uncertainty was confirmed experimentally to be less than one percent for most drying trials. The comparison with methods from the literature shows that the developed system has the highest accuracy for chemical analysis in the field of drying. The method was used to correlate the drying process and the cracking of layers. The produced layers showed an increasing amount of cracks when water accumulation occurred in the course of drying. The crack formation is not examined in this work for its electrochemical importance but described as an observation only. Based on this, parameters were varied in order to influence the drying process in a substance-specific manner. The results showed by which the drying selectivity is influenced, meaning the enrichment or depletion of single solvents. For catalyst-containing, aqueous-alcoholic dispersions it was found that avariation of the water content reverses the selectivity without changing significantly the drying behavior of alcoholic solvent content. It was found that the interactions between dispersion and substrate do not influence the drying process but result in different cracking behavior. This is related to the surface energy of various substrates. The drying of dispersions under air atmosphere resulted in a significant occurrence of oxidation products in the sample. The reversal of the drying selectivity in the end of the drying signaled a depletion of alcoholic content in the residual solvent of the dispersion. The present work confirms that the theoretical models for drying are basically transferable to electrode drying. In accordance with models, a strong dependence of thedrying selectivity on the overflow rate and the partial pressure of solvents in the dryinggas were found. As expected, changes in the drying temperature showed an unselectiveeffect on the drying. The three parameters mentioned before act on the total drying timein combinatio

Faculty Spotlight- Dr. Oliver Glanz

Published on Oct 31, 2018 Andrews University Teaching and Learning: Dr. Glanz our student would like to take a moment and say thanks for your wholistic care.https://digitalcommons.andrews.edu/auvideo/1434/thumbnail.jp

A completely slot die coated membrane electrode assembly

This work shows how to manufacture completely coated membrane electrode assemblies (CC-MEAs) for PEM water electrolysis by only using a slot die. Platinum, Nafion®, and IrO2 dispersions are successively coated to the respective dried layer. For comparison reasons, MEAs with the same Iridium loading of 2.1 mg cm−2 and Platinum loading of 0.4 mg cm−2, assembled with a commercial membrane of the same 20 μm thickness, were produced via decal method. Differences in polarization curves are attributed to the lower high frequency resistance of CC-MEAs determined by impedance spectroscopy. The easy-to-scale CC-MEA method presented here offers the advantages of direct membrane deposition (DMD) without the challenge of homogenously coating a porous transport layer (PTL). Therefore, it allows a free choice of different PTLs – regardless if in sintered form or as expanded metal. The comparability between the produced CC-MEAs and published DMD results is shown by means of cross-sectional and electrochemical measurements