592 research outputs found
Experimental investigations on the fatigue resistance of automatically welded tubular X-joints for jacket support structures
The development within the offshore wind sector towards more powerful turbines combined with increasing water depth for new wind parks is challenging both the designer as well as the manufacturer of bottom fixed support structures. Besides XL-monopiles, the market developed an innovative and economic jacket support structure which is based on automatically manufactured tubular joints combined with standardized pipes. Besides the improvements for a serial manufacturing process the automatically welded tubular joints show a great potential in terms of fatigue resistance e.g. due to a smooth weld geometry without sharp notches. However, these benefits are not considered yet within the fatigue design process of automatically manufactured jacket substructures according to current standards due to the lack of suitable S-N curves. Therefore, 32 axial fatigue tests on single and double-sided automatically welded tubular X-joints have been performed to determine a new hot spot stress related S-N curve. Based on these constant amplitude fatigue tests a new S-N curve equal to a FAT 126 curve was computed which implicitly includes the benefits of the automatically welding procedure. © Published under licence by IOP Publishing Ltd
Short-term soil response under plastic mulching in strawberry cultivation
Plastic mulches (PM) are known for increasing soil temperature and retaining soil moisture, suppressing weeds and avoiding ground contact of on-soil growing products. Thus, the use of PM in agriculture has been significantly increased in the last years, with important economic benefits for the farmers. Most studies dealing with PM emphasize the positive effects of this management, yet recent reports have shown that the use of PM is linked to a decrease of SOM content, soil erosion, soil contamination with plastic residues and in some cases to a high mycotoxin production by soil fungi. This questions the sustainability of the intensive use of PM in agriculture. The aim of this study was to assess the short-term modification of soil physicochemical and microbial parameters under PM, compared to no-mulch (NM). The experiment was conducted in a 2016-planted strawberry field. For each management (PM vs. NM) five plots were selected. Cultivation of strawberry in both PM and NM was done in a ridge-furrow system with subsurface irrigation. Samples were collected prior to the planting (T0) and successively at two (T1) and four months (T2) after planting. Different depths were sampled in the ridges (0-10, 10-30 and 30-60 cm) and in the furrows (0-10 and 10-40 cm). The analysis of the quantity and quality of soil organic matter is ongoing and comprised soil physicochemical analysis: pH, electrical conductivity, water content, bulk density and stability, organic C and N and density fractionation. Moreover, soil microbiology was studied via soil microbial carbon and mycotoxin occurrence as indicator of fungal stress. Additionally, temperature, humidity and pH of soil were daily recorded using an in-field installed measuring station. The continuously recorded environmental data showed differences in the temperature patterns between PM and NM, with highest average temperature under plastic. As well, pH and humidity data indicated differences between the treatments
Morphological aspects of male and female hands
This is an electronic version of an article published in Annals of Human Biology, 1996, 23(6), 491-494. Annals of Human Biology is available online at informaworldTM http://www.informaworld.com/smpp/content~content=a739339013~db=all~order=pageThis journal article discusses a series of hand radiographs from Gwynedd, North Wales, which were assessed for frequencies in digital and metacarpal formulae between the genders
Mechanically induced silyl ester cleavage under acidic conditions investigated by AFM-based single-molecule force spectroscopy in the force-ramp mode
AFM-based dynamic single-molecule force spectroscopy was used to stretch carboxymethylated amylose (CMA) polymers, which have been covalently tethered between a silanized glass substrate and a silanized AFM tip via acid-catalyzed ester condensation at pH 2.0. Rupture forces were measured as a function of temperature and force loading rate in the force-ramp mode. The data exhibit significant statistical scattering, which is fitted with a maximum likelihood estimation (MLE) algorithm. Bond rupture is described with a Morse potential based Arrhenius kinetics model. The fit yields a bond dissociation energy De = 35 kJ mol−1 and an Arrhenius pre-factor A = 6.6 × 104 s−1. The bond dissociation energy is consistent with previous experiments under identical conditions, where the force-clamp mode was employed. However, the bi-exponential decay kinetics, which the force-clamp results unambiguously revealed, are not evident in the force-ramp data. While it is possible to fit the force-ramp data with a bi-exponential model, the fit parameters differ from the force-clamp experiments. Overall, single-molecule force spectroscopy in the force-ramp mode yields data whose information content is more limited than force-clamp data. It may, however, still be necessary and advantageous to perform force-ramp experiments. The number of successful events is often higher in the force-ramp mode, and competing reaction pathways may make force-clamp experiments impossible
Unzipping Kinetics of Double-Stranded DNA in a Nanopore
We studied the unzipping kinetics of single molecules of double-stranded DNA
by pulling one of their two strands through a narrow protein pore. PCR analysis
yielded the first direct proof of DNA unzipping in such a system. The time to
unzip each molecule was inferred from the ionic current signature of DNA
traversal. The distribution of times to unzip under various experimental
conditions fit a simple kinetic model. Using this model, we estimated the
enthalpy barriers to unzipping and the effective charge of a nucleotide in the
pore, which was considerably smaller than previously assumed.Comment: 10 pages, 5 figures, Accepted: Physics Review Letter
Experimental investigations on the fatigue resistance of automatically welded tubular X-joints for jacket support structures
The development within the offshore wind sector towards more powerful turbines combined with increasing water depth for new wind parks is challenging both the designer as well as the manufacturer of bottom fixed support structures. Besides XL-monopiles, the market developed an innovative and economic jacket support structure which is based on automatically manufactured tubular joints combined with standardized pipes. Besides the improvements for a serial manufacturing process the automatically welded tubular joints show a great potential in terms of fatigue resistance e.g. due to a smooth weld geometry without sharp notches. However, these benefits are not considered yet within the fatigue design process of automatically manufactured jacket substructures according to current standards due to the lack of suitable S-N curves. Therefore, 32 axial fatigue tests on single and double-sided automatically welded tubular X-joints have been performed to determine a new hot spot stress related S-N curve. Based on these constant amplitude fatigue tests a new S-N curve equal to a FAT 126 curve was computed which implicitly includes the benefits of the automatically welding procedure
Shift of microbial communities and reduced enzymatic activity in soil under plastic mulching system in strawberry cultivation
The use of plastic mulching (PM) in agriculture has strongly increased in the last years. Improved water saving and higher soil temperature are some advantages of this management. Yet, an intensive use of PM has been recently linked to negative effects on soil quality. The aim of this study is thus to assess the effects of long-term plastic mulching (PM) on soil microbial indicators. PM was compared with the use of wheat straw mulching (SM), an also widely used mulch material. Samples were collected at two depths (0-5 and 5-10 cm) from strawberry fields, after 4-year management. Cultivation in PM and SM was done in a ridge-furrow system with subsurface irrigation. Soil characterization comprised soil texture and aggregate stability, soil organic carbon, pH and water content. Soil microbial analysis included: Soil microbial biomass (Cmic), a fraction of soil cultivable fungi (CFU values), soil bacteria (16S rRNA), denitrifying community (nirK, nirS, narG, napA genes), soil enzyme activity (C-Chitinase, P-Phosphatase and N Leucine-aminopeptidase), deoxynivalenol (DON) content and Cmic:Corg ratio. Positive effects on soil physicochemical properties were observed under PM as compared to SM, reflected by a higher soil carbon content and better aggregate stability (p>0.05). Yet, soil microbial analysis revealed some differences between managements. Cmic values were comparable in both systems, showing no differences in soil microbial biomass. In the same way, the analysis of functional genes of the N cycle and the activity of the enzymes P-Phosphatase and N Leucine-aminopeptidase was not affected by the mulching treatment. But, the abundance of bacteria (18%) and a fraction of soil cultivable fungi were reduced by respectively 18 and 62% under PM. Since the Cmic values remained similar between treatments, this accounts for a shift of microbial communities under PM. Additionally, C-Chitinase activity declined under PM. Interestingly, this enzyme correlated positively with CFU values (r=0.781, p=0.001), suggesting that a reduction of the activity is a consequence of the reduction of the fungal biomass. Additionally, a higher deoxynivalenol concentration (2.2 ± 2.4 µg kg-1) and a reduced Cmic:Corg ratio (1.3±0.3%) were observed under PM, indicative of less appropriate soil conditions after long-term PM management
Mechanically activated rupture of single covalent bonds: evidence of force induced bond hydrolysis.
We have used temperature-dependent single molecule force spectroscopy to stretch covalently anchored carboxymethylated amylose (CMA) polymers attached to an amino-functionalized AFM cantilever. Using an Arrhenius kinetics model based on a Morse potential as a one-dimensional representation of covalent bonds, we have extracted kinetic and structural parameters of the bond rupture process. With 35.5 kJ mol−1, we found a significantly smaller dissociation energy and with 9.0 × 102 s−1 to 3.6 × 103 s−1 also smaller Arrhenius pre-factors than expected for homolytic bond scission. One possible explanation for the severely reduced dissociation energy and Arrhenius pre-factors is the mechanically activated hydrolysis of covalent bonds. Both the carboxylic acid amide and the siloxane bond in the amino-silane surface linker are in principle prone to bond hydrolysis. Scattering, slope and curvature of the scattered data plots indicate that in fact two competing rupture mechanisms are observed
Dragging a polymer chain into a nanotube and subsequent release
We present a scaling theory and Monte Carlo (MC) simulation results for a
flexible polymer chain slowly dragged by one end into a nanotube. We also
describe the situation when the completely confined chain is released and
gradually leaves the tube. MC simulations were performed for a self-avoiding
lattice model with a biased chain growth algorithm, the pruned-enriched
Rosenbluth method. The nanotube is a long channel opened at one end and its
diameter is much smaller than the size of the polymer coil in solution. We
analyze the following characteristics as functions of the chain end position
inside the tube: the free energy of confinement, the average end-to-end
distance, the average number of imprisoned monomers, and the average stretching
of the confined part of the chain for various values of and for the number
of monomers in the chain, . We show that when the chain end is dragged by a
certain critical distance into the tube, the polymer undergoes a
first-order phase transition whereby the remaining free tail is abruptly sucked
into the tube. This is accompanied by jumps in the average size, the number of
imprisoned segments, and in the average stretching parameter. The critical
distance scales as . The transition takes place when
approximately 3/4 of the chain units are dragged into the tube. The theory
presented is based on constructing the Landau free energy as a function of an
order parameter that provides a complete description of equilibrium and
metastable states. We argue that if the trapped chain is released with all
monomers allowed to fluctuate, the reverse process in which the chain leaves
the confinement occurs smoothly without any jumps. Finally, we apply the theory
to estimate the lifetime of confined DNA in metastable states in nanotubes.Comment: 13pages, 14figure
- …