Is Single-Molecule Fluorescence Spectroscopy Ready To Join the Organic Chemistry Toolkit? A Test Case Involving Click Chemistry

Single molecule spectroscopy (SMS) has matured to a point where it can be used as a convenient tool to guide organic synthesis and drug discovery, particularly applicable to catalytic systems where questions related to homogeneous vs heterogeneous pathways are important. SMS can look at intimate mechanistic details that can inspire major improvements of the catalyst performance, its recovery, and reuse. Here, we use the click reaction between alkynes and azides as an example where improvements at the bench have been inspired and validated using single-molecule fluorescence spectroscopy

Expanding the Color Space in the Two-Color Heterogeneous Photocatalysis of Ullmann C–C Coupling Reactions

The Ullmann reaction can be heterogeneously photocatalyzed by UV excitation of Pd@TiO2. While a similar dose of visible light does not initiate the reaction, combination with UV light enhances activity and selectivity toward cross-combination products. The reaction involves photoresponsive intermediates, likely associated with the catalyst, where Pd nanostructures can absorb visible radiation and TiO2, the UV component. Hence, a single hybrid-photoresponsive material can have different reactivity upon two-wavelength irradiation enabling direct tuning of yields and selectivity. This color-space expansion promises unprecedented uses in organic chemistry, where improvement in catalytic activity and selectivity will impact the development of catalytic processes with long-term multicycle performance

Thiol-Stabilized Gold Nanoparticles: New Ways To Displace Thiol Layers Using Yttrium or Lanthanide Chlorides

We use the aurophilic interactions shown by lanthanides to overcome the sulfur–gold interaction. UV–vis and X-ray photoelectron spectroscopy confirm that yttrium or lanthanide chlorides easily displace sulfur ligands from the surface of thiol-stabilized gold nanoparticles

Catalytic farming: reaction rotation extends catalyst performance

The use of heterogeneous catalysis has key advantages compared to its homogeneous counterpart, such as easy catalyst separation and reusability. However, one of the main challenges is to ensure good performance after the first catalytic cycles. Active catalytic species can be inactivated during the catalytic process leading to reduced catalytic efficiency, and with that loss of the advantages of heterogeneous catalysis. Here we present an innovative approach in order to extend the catalyst lifetime based on the crop rotation system used in agriculture. The catalyst of choice to illustrate this strategy, Pd@TiO2, is used in alternating different catalytic reactions, which reactivate the catalyst surface, thus extending the reusability of the material, and preserving its selectivity and efficiency. As a proof of concept, different organic reactions were selected and catalyzed by the same catalytic material during target molecule rotation

Improving the Sunscreen Properties of TiO2 through an Understanding of Its Catalytic Properties

The use of particulate titanium dioxide (TiO2) as an active sunscreen ingredient has raised concerns about potential risks from TiO2-mediated free radical formation. To date, remediation attempts have concentrated on reducing the yield of free radical generation by TiO2 upon sunlight exposure. The problem with this approach is that given the band gap in TiO2, production of radical and the ensuing reactive oxygen species (ROS) is completely normal. Our strategy is based on a nontoxic, biocompatible shell that neutralizes the free radicals by scavenging them with natural antioxidants before they exit the particle. The new lignin@TiO2 composites preserve the scattering and absorption properties of TiO2 because the particles retain their nanoscale dimensions as preferred by the cosmetic industry. Although the target properties for photocatalysis and sun-protection applications are opposite, we argue that exactly the same knowledge is required to optimize either one

Visible Light Production of Hydrogen by Ablated Graphene: Water Splitting or Carbon Gasification?

Reduced graphene oxide modified by pulsed laser ablation causes water splitting under visible light illumination (532 nm). When the light source is a pulsed laser, water splitting is accompanied by carbon gasification (CO formation); however, conventional (LED) light sources produce water splitting exclusively

Mechanistic studies on the photogeneration of o- and p-xylylenes from α,α'-dichloroxylenes

Two-colour two-laser techniques have unambiguously proved that photolysis of the o-/p-(chloromethyl)benzyl radical leads to the sequential two-photon generation of o-/pxylylene from α,α'-dichloro-o-/p-xylene.Perez Prieto, Julia, [email protected]

Copper nanoparticle heterogeneous catalytic 'click' cycloaddition confirmed by single-molecule spectroscopy

Colloidal or heterogeneous nanocatalysts can improve the range and diversity of Cu(I)catalysed click reactions and facilitate catalyst separation and reuse. Catalysis by metal nanoparticles raises the question as to whether heterogeneous catalysts may cause homogeneous catalysis through metal ion leaching, since the catalytic process could be mediated by the particle, or by metal ions released from it. The question is critical as unwanted homogeneous processes could offset the benefits of heterogeneous catalysis. Here, we combine standard bench scale techniques with single-molecule spectroscopy to monitor single catalytic events in real time and demonstrate that click catalysis occurs directly at the surface of copper nanoparticles; this general approach could be implemented in other systems. We use 'from the mole to the molecule' to describe this emerging idea in which mole scale reactions can be optimized through an intimate understanding of the catalytic process at the single-molecule-single catalytic nanoparticle level.The Natural Sciences and Engineering Research Council of Canada supported this work through its Discovery and CREATE programs, while the Canadian Foundation for Innovation enabled the purchase of the instrumentation used in this work. M. L. M. thanks the Spanish Ministerio de Educacion, Cultura y Deporte (Programa Salvador de Madariaga) for its financial support.Decan, MR.; Impellizzeri, S.; Marín García, ML.; Scaiano, J. (2014). Copper nanoparticle heterogeneous catalytic 'click' cycloaddition confirmed by single-molecule spectroscopy. Nature Communications. 5:4612-4615. doi:10.1038/ncomms5612S461246155Rostovtsev, V. V., Green, L. G., Fokin, V. V. & Sharpless, K. B. A stepwise Huisgen cycloaddition process: copper(I)-catalyzed regioselective ‘ligation’ of azides and terminal alkynes. Angew. Chem. Int. Ed. 41, 2596–2599 (2002).Tornøe, C. W., Christensen, C. & Meldal, M. Peptidotriazoles on solid phase: [1,2,3]-triazoles by regiospecific copper(I)-catalyzed 1,3-dipolar cycloadditions of terminal alkynes to azides. J. Org. Chem. 67, 3057–3064 (2002).Hein, J. & Fokin, V. Copper-catalyzed azide–alkyne cycloaddition (CuAAC) and beyond: new reactivity of copper(I) acetylides. Chem. Soc. Rev. 39, 1302–1315 (2010).Kolb, H. C., Finn, M. G. & Sharpless, K. B. Click chemistry: diverse chemical function from a few good reactions. Angew. Chem. Int. Ed. 40, 2004 (2001).Meldal, M. & Tornoe, C. W. Cu-catalyzed azide-alkyne cycloaddition. Chem. Rev. 108, 2952–3015 (2008).Moses, J. E. & Moorhouse, A. D. The growing applications of click chemistry. Chem. Soc. Rev. 36, 1249–1262 (2007).Thirumurugan, P., Matosiuk, D. & Jozwiak, K. Click chemistry for drug development and diverse chemical—biology applications. Chem. Rev. 113, 4905–4979 (2013).Cintas, P., Barge, A., Tagliapietra, S., Boffa, L. & Cravotto, G. Alkyne–azide click reaction catalyzed by metallic copper under ultrasound. Nat. Protoc. 5, 607–616 (2010).Hong, V., Presolski, S., Ma, C. & Finn, M. Analysis and optimization of copper-catalyzed azide-alkyne cycloaddition for bioconjugation. Angew. Chem. Int. Ed. 48, 9879–9883 (2009).Kappe, C. & Van Der Eycken, E. Click chemistry under non-classical reaction conditions. Chem. Soc. Rev. 39, 1280–1290 (2010).Pachón, L., Van Maarseveen, J. & Rothenberg, G. Click chemistry: copper clusters catalyse the cycloaddition of azides with terminal alkynes. Adv. Synth. Catal. 347, 811–815 (2005).Adzima, B. et al. Spatial and temporal control of the alkyne–azide cycloaddition by photoinitiated Cu(II) reduction. Nat. Chem. 3, 258–261 (2011).Jin, T., Yan, M. & Yamamoto, Y. Click chemistry of alkyne-azide cycloaddition using nanostructured copper catalysts. ChemCatChem 4, 1217–1229 (2012).Woo, H. et al. Azide-alkyne Huisgen [3+2] cycloaddition using CuO nanoparticles. Molecules 17, 13235–13252 (2012).Rance, G., Solomonsz, W. & Khlobystov, A. Click chemistry in carbon nanoreactors. Chem. Commun. 49, 1067–1069 (2013).Alonso, F., Moglie, Y., Radivoy, G. & Yus, M. Unsupported copper nanoparticles in the 1,3-dipolar cycloaddition of terminal alkynes and azides. Eur. J. Org. Chem. 10, 1875–1884 (2010).Alonso, F., Moglie, Y., Radivoy, G. & Yus, M. Multicomponent synthesis of 1,2,3-triazoles in water catalyzed by copper nanoparticles on activated carbon. Adv. Synth. Catal. 352, 3208–3214 (2010).Raut, D. et al. Copper nanoparticles in ionic liquids: Recyclable and efficient catalytic system for 1,3-dipolar cycloaddition reaction. Catal. Commun. 10, 1240–1243 (2009).Kumar, B. S. P. A., Reddy, K. H. V., Madhav, B., Ramesh, K. & Nageswar, Y. V. D. Magnetically separable CuFe2O4 nano particles catalyzed multicomponent synthesis of 1,4-disubstituted 1,2,3-triazoles in tap water using ‘click chemistry’. Tetrahedron Lett. 53, 4595–4599 (2012).Hudson, R., Li, C. & Moores, A. Magnetic copper–iron nanoparticles as simple heterogeneous catalysts for the azide–alkyne click reaction in water. Green Chem. 14, 622–624 (2012).Sarkar, A., Mukherjee, T. & Kapoor, S. PVP-stabilized copper nanoparticles: a reusable catalyst for ‘click’ reaction between terminal alkynes and azides in nonaqueous solvents. J. Phys. Chem. C 112, 3334–3340 (2008).Pacioni, N. L., Filippenko, V., Presseau, N. & Scaiano, J. C. Oxidation of copper nanoparticles in water: mechanistic insights revealed by oxygen uptake and spectroscopic methods. Dalton Trans. 42, 5832–5838 (2013).Davies, I. W., Matty, L., Hughes, D. L. & Reider, P. J. Are heterogeneous catalysts precursors to homogeneous catalysts? J. Am.Chem. Soc. 123, 10139–10140 (2001).Witham, C. A. et al. Converting homogeneous to heterogeneous in electrophilic catalysis using monodisperse metal nanoparticles. Nat. Chem. 2, 36–41 (2010).Schmidt, A. F. & Kurokhtina, A. A. Distinguishing between the homogeneous and heterogeneous mechanisms of catalysis in the Mizoroki-Heck and Suzuki-Miyaura reactions: problems and prospects. Kinet. Catal. 53, 714–730 (2012).Nishina, Y., Miyata, J., Kawai, R. & Gotoh, K. Recyclable Pd-graphene catalyst: mechanistic insights into heterogeneous and homogeneous catalysis. RSC Advances 2, 9380–9382 (2012).Esfandiari, N. M. & Blum, S. A. Homogeneous vs heterogeneous polymerization catalysis revealed by single-particle fluorescence microscopy. J. Am.Chem. Soc. 133, 18145–18147 (2011).Hensle, E. M. & Blum, S. A. Phase separation polymerization of dicyclopentadiene characterized by in operando fluorescence microscopy. J. Am.Chem. Soc. 135, 12324–12328 (2013).De Cremer, G. et al. High-resolution single-turnover mapping reveals intraparticle diffusion limitation in Ti-MCM-41-catalyzed epoxidation. Angew. Chem. Int. Ed. 49, 908–911 (2010).Roeffaers, M. B. J. et al. Super-resolution reactivity mapping of nanostructured catalyst particles. Angew. Chem. Int. Ed. 48, 9285–9289 (2009).Roeffaers, M. B. J. et al. Spatially resolved observation of crystal-face-dependent catalysis by single turnover counting. Nature 439, 572–575 (2006).Xu, W., Kong, J. S., Yeh, Y.-T.E. & Chen, P. Single-molecule nanocatalysis reveals heterogeneous reaction pathways and catalytic dynamics. Nat. Mater. 7, 992–996 (2008).Zhou, X., Xu, W., Liu, G., Panda, D. & Chen, P. Size-dependent catalytic activity and dynamics of gold nanoparticles at the single-molecule level. J. Am.Chem. Soc. 132, 138–146 (2010).Zhou, X. et al. Quantitative super-resolution imaging uncovers reactivity patterns on single nanocatalysts. Nat. Nanotechnol. 7, 237–241 (2012).Chen, P. et al. Single-molecule fluorescence imaging of nanocatalytic processes. Chem. Soc. Rev. 39, 4560–4570 (2010).Chen, P. et al. Spatiotemporal catalytic dynamics within single nanocatalysts revealed by single-molecule microscopy. Chem. Soc. Rev. 43, 1107–1117 (2014).Buurmans, I. L. C. & Weckhuysen, B. M. Heterogeneities of individual catalyst particles in space and time as monitored by spectroscopy. Nat. Chem. 4, 873–886 (2012).Cordes, T. & Blum, S. A. Opportunities and challenges in single-molecule and single-particle fluorescence microscopy for mechanistic studies of chemical reactions. Nat. Chem. 5, 993–999 (2013).Zhou, X., Choudhary, E., Andoy, N. M., Zou, N. & Chen, P. Scalable parallel screening of catalyst activity at the single-particle level and subdiffraction resolution. ACS Catal. 3, 1448–1453 (2013).Esfandiari, N. M. et al. Single-molecule imaging of platinum ligand exchange reaction reveals reactivity distribution. J. Am. Chem. Soc. 132, 15167–15169 (2010).Wee, T., Schmidt, L. C. & Scaiano, J. C. Photooxidation of 9-anthraldehyde catalyzed by gold nanoparticles: solution and single nanoparticle studies using fluorescence lifetime imaging. J. Phys. Chem. C 116, 24373–24379 (2012).Fiolka, R., Belyaev, Y., Ewers, H. & Stemmer, A. Even illumination in total internal reflection fluorescence microscopy using laser light. Microsc. Res. Tech. 71, 45–50 (2007).Canham, S. M. et al. Toward the single-molecule investigation of organometallic reaction mechanisms: single-molecule imaging of fluorophore-tagged palladium(II) complexes. Organometallics 27, 2172–2175 (2008).Jares-Erijman, E. & Jovin, T. FRET imaging. Nat. Biotechnol. 21, 1387–1395 (2003).Roy, R., Hohng, S. & Ha, T. A practical guide to single-molecule FRET. Nat. Methods 5, 507–516 (2008).Kasper, L. et al. Probing the free-energy surface for protein folding with single-molecule spectroscopy. Nature 419, 743–747 (2002).Chung, H., Louis, J. & Eaton, W. Distinguishing between protein dynamics and dye photophysics in single-molecule FRET experiments. Biophys. J. 98, 696–706 (2010).Hohlbein, J., Craggs, T. & Cordes, T. Alternating-laser excitation: single-molecule FRET and beyond. Chem. Soc. Rev. 43, 1156–1171 (2014).Greenleaf, W. J., Woodside, M. T. & Block, S. M. High-resolution, single-molecule measurements of biomolecular motion. Annu. Rev. Biophys. Biomol. Struct. 36, 171–190 (2007).Di Fiori, N. & Meller, A. The effect of dye-dye interactions on the spatial resolution of single-molecule FRET measurements in nucleic acids. Biophys. J. 98, 2265–2272.Ahlquist, M. r. & Fokin, V. Enhanced reactivity of dinuclear copper(I) acetylides in dipolar cycloadditions. Organometallics 26, 4389–4391 (2007).Straub, B. μ-Acetylide and μ-alkenylidene ligands in ‘click’ triazole syntheses. Chem. Commun. 37, 3868–3870 (2007)

Decorated titania fibers as photocatalysts for hydrogen generation and organic matter degradation

Heterogenous photocatalysts based on electrospun fibers composed of polyvinylpyrrolidone and titanium propoxide were prepared and heated at 500, 750 and 950 °C to obtain anatase and rutile fibers. The fibers were then decorated with Pd and Co nanoparticles as well as a symmetrical zinc phthalocyanine (Pc). The fibrous materials obtained have a paper-like macroscopic appearance allowing for easy handling and separation. The photocatalytic activities of the new materials were evaluated for the generation of H2 upon UV (368 nm) or visible (630 nm) light excitation. Depending on the heat treatment or the post-synthetic decoration method, the materials show higher, or similar, activity compared to P25-TiO2, with superior ease of separation. The catalysts showed ability to degrade organic matter, with MeOH used as a model compound. This is of considerable importance for potential water treatment applications that will require flow-compatible materials