Plant Selection for Ethnobotanical Uses on the Amalfi Coast (Southern Italy)

Background Many ethnobotanical studies have investigated selection criteria for medicinal and non-medicinal plants. In this paper we test several statistical methods using different ethnobotanical datasets in order to 1) define to which extent the nature of the datasets can affect the interpretation of results; 2) determine if the selection for different plant uses is based on phylogeny, or other selection criteria. Methods We considered three different ethnobotanical datasets: two datasets of medicinal plants and a dataset of non-medicinal plants (handicraft production, domestic and agro-pastoral practices) and two floras of the Amalfi Coast. We performed residual analysis from linear regression, the binomial test and the Bayesian approach for calculating under-used and over-used plant families within ethnobotanical datasets. Percentages of agreement were calculated to compare the results of the analyses. We also analyzed the relationship between plant selection and phylogeny, chorology, life form and habitat using the chi-square test. Pearson’s residuals for each of the significant chi-square analyses were examined for investigating alternative hypotheses of plant selection criteria. Results The three statistical analysis methods differed within the same dataset, and between different datasets and floras, but with some similarities. In the two medicinal datasets, only Lamiaceae was identified in both floras as an over-used family by all three statistical methods. All statistical methods in one flora agreed that Malvaceae was over-used and Poaceae under-used, but this was not found to be consistent with results of the second flora in which one statistical result was non-significant. All other families had some discrepancy in significance across methods, or floras. Significant over- or under-use was observed in only a minority of cases. The chi-square analyses were significant for phylogeny, life form and habitat. Pearson’s residuals indicated a non-random selection of woody species for non-medicinal uses and an under-use of plants of temperate forests for medicinal uses. Conclusions Our study showed that selection criteria for plant uses (including medicinal) are not always based on phylogeny. The comparison of different statistical methods (regression, binomial and Bayesian) under different conditions led to the conclusion that the most conservative results are obtained using regression analysis

High-MgO lavas associated to CFB as indicators of plume-related thermochemical effects: the case of ultra-titaniferous picrite-basalt from the Northern Ethiopian-Yemeni plateau

A comprehensive petrological and geochemical dataset is reported in order to define the thermo-compositional characteristics of Ti (Fe)-enriched picrite-basalt lavas (HT2, TiO2 3-7 wt%), erupted close to the axial zone of the inferred Afar mantle plume, at the centre of the originally continuous Ethiopian-Yemeni CFB plateau (ca. 30Ma) which is zonally arranged with progressively lower Ti basalts (HT1, TiO2 2-4 wt%; LT, TiO2 1-3 wt%) toward the periphery. Integrated petrogenetic modelling based on major and trace element analyses of bulk rocks, minerals and melt inclusions in olivines, as well as Sr-Nd-Pb-He-O isotope compositional variations enables us to make several conclusions. 1) The phase equilibria constraints indicate that HT2 primary picrites were generated at ca. 1570°C mantle potential temperatures (Tp) in the pressure range 4-5 GPa whereas the HT1 and LT primary melts formed at shallower level (< 2 to 3 GPa, Tp 1530 °C for HT1 and 1430°C for LT). Thus the Afar plume head was a thermally and compositionally zoned melting region with maximum excess temperatures of 300-350°C with respect to the ambient mantle. 2) The HT2 primary melts upwelled nearly adiabatically to the base of the continental crust (ca. 1 GPa) where fractionation of olivine, followed by clinopyroxene, led to variably differentiated picritic and basaltic magmas. 3) Trace element modelling requires that the primary HT2 melts were generated - either by fractional or batch melting (F 9-10%) - from a mixed garnet peridotite source (85%) with 15% eclogite (derived from transitional MORB protoliths included in Panafrican terranes) that has to be considered a specific Ti-Fe and incompatible element enriched component entrained by the Afar plume. 4) The LT, HT1 and HT2 lavas have 143Nd/144Nd = 0.5131-0.5128, whereas Sr-Pb isotopes are positively correlated with TiO2, varying from 87 Sr/86Sr 0.7032 and 206Pb/204Pb 18.2 in LT basalts to 87Sr/86Sr 0.7044 and 206Pb/204Pb 19.4 in HT2 picrite-basalts. High 3He/4He (15-20 RA) ratios are exclusively observed in HT2 lavas, confirming earlier evidence that these magmas require a component of deep mantle in addition to eclogite, while the LT basalts may more effectively reflect the signature of the pre-existing mantle domains. The comparison between high-MgO (13-22%) lavas from several Phanerozoic CFB provinces (Karoo, Paranà-Etendeka, Emeishan, Siberia, Deccan, North Atlantic Province) shows that they share extremely high mantle potential temperatures (Tp 1550-1700°C) supporting the view that hot mantle plumes are favoured candidates for triggering many LIPs. However, the high incompatible element and isotopic variability of these high-MgO lavas (and associated CFB) suggest that plume thermal anomalies are not necessarily accompanied by significant and specific chemical effects, which depend on the nature of mantle materials recycled during the plume rise, as well as by the extent of related mantle enrichments (if any) on the pre-existing lithospheric section

Co-sintering of dense electrophoretically deposited YSZ films on porous NiO-YSZ substrates for SOFC applications

An original process for the preparation of YSZ dense films with a thickness lower than 10 μm over NiO-YSZ substrates is presented. This process involves the preparation of a green membrane of NiO-YSZ and subsequent electrophoretic deposition (EPD) of commercial YSZ powder on this polymer-rich membrane. A single thermal treatment allowed removal of the organic compounds, sintering of the layers and full densification of the electrolyte. © 2005 Materials Research Society

Electrochemical characterization of anode supported SOFC prepared by co-firing technique

One of the main problems in the fabrication of anode supported solid oxide fuel cells is related to the sintering of electrolyte layer on anodic substrate, because differential densification of the layers may result in cracks during thermal process. Co-firing approach consists of simultaneous sintering of both electrolyte and anode. In this way, shrinkage of porous layer is compatible with the densification of electrolyte film. In this work co-firing technique was used for the sintering of YSZ thick films deposited on green NiO-YSZ layers by electrophoretic deposition (EPD). EPD is a colloidal process based on the motion of charged particles in the electric field in the direction of the electrode with opposite charge, thus forming a compact layer. With respect to other techniques, EPD has several advantages: short formation times, little restriction in the shape of substrates, simple deposition apparatus, possibility to have a mass production, low cost, easy control of the thickness of the deposited film through simple regulation of applied potential and deposition time. The EPD/co-firing combined process allowed to obtain a dense, 10 μm thick, crack free electrolyte layer with a good bonding to the anode. A slurry was prepared starting from a commercial NiOYSZ anodic powder (Praxair), polyvinylidene fluoride (PVDF binder SOLEF 6020, Solvay), a nanometric carbon powder (super P, Carbon Belgium), dispersed in N-methyl-2-pyrrolidone. A green membrane was obtained after evaporation of the solvent. A suspension of YSZ powder was prepared starting from commercial YSZ (TZ8Y, Tosoh) in methanol and deposited by EPD on a green NiO-YSZ membrane using a planar EPD cell setup. Co-firing parameters were assessed from the results of TG-DTA analysis performed on green bodies. Figure 1 shows the results of Hg porosimetry performed on sintered anodes for the determination of residual porosity and surface area. Green and fired samples were characterized in terms of morphology by scanning electron microscopy (FE-SEM), as reported in Figure 2. EDS linescan performed on the cross section of the cell did not show nickel diffusion in the electrolyte layer. A cathode layer was deposited on fully sintered half cells via spray-powder technique, using a suspension of commercial LSFC powder (Nextech), followed by a low temperature sintering process. Electrochemical characterization was performed on button cells in hydrogen in the temperature range 600-800 degrees C. Data of the electrochemical characterization will be presented at the conference

Mode Confinement in Photonic Quasi-Crystal Point-Defect Cavities for Particle Accelerators

In this Letter, we present a study of the confinement properties of point-defect resonators in finite-size photonic-bandgap structures composed of aperiodic arrangements of dielectric rods, with special emphasis on their use for the design of cavities for particle accelerators. Specifically, for representative geometries, we study the properties of the fundamental mode (as a function of the filling fraction, structure size, and losses) via 2-D and 3-D full-wave numerical simulations, as well as microwave measurements at room temperature. Results indicate that, for reduced-size structures, aperiodic geometries exhibit superior confinement properties by comparison with periodic ones.Comment: 4 pages, 4 figures, accepted for publication in Applied Physics Letter

Post-stroke depression increases disability more than 15% in ischemic stroke survivors: a case-control study

We performed a retrospective, case-control study in consecutive ischemic stroke patients admitted to our stroke rehabilitation unit. Patients were matched for severity of neurological impairment (evaluated with the Canadian Neurological Scale, CNS), age (difference within 1 year), and onset admission interval (difference within 3 days). Participants were divided into two subgroups according to the presence or absence of PSD. Aim was to assess the specific influence of post-stroke depression (PSD) and antidepressant treatment on both basal functional status and rehabilitation outcomes. All PSD patients were treated primarily with serotoninergic antidepressants (AD). The final sample included 280 patients with depression (out of 320 found in a whole case series of 993 ischemic patients, i.e., 32.25%) and 280 without depression. Forty patients with depression were excluded because they had a history of severe psychiatric illness or aphasia, with a severe comprehension deficit. On one hand, PSD patients obtained lower Barthel Index (BI) and Rivermead Mobility Index (RMI) scores at both admission and discharge, with minor effectiveness of rehabilitative treatment and longer length of stay; on the other hand, this group had a lower percentage of dropouts. Lastly, PSD patients showed a different functional outcome, based on their response to antidepressant therapy, that was significantly better in responders than in non-responders (13.13%). Our results confirm the unfavorable influence of PSD on functional outcome, despite pharmacological treatment

Hybrid photonic-bandgap accelerating cavities

In a recent investigation, we studied two-dimensional point-defected photonic bandgap cavities composed of dielectric rods arranged according to various representative periodic and aperiodic lattices, with special emphasis on possible applications to particle acceleration (along the longitudinal axis). In this paper, we present a new study aimed at highlighting the possible advantages of using hybrid structures based on the above dielectric configurations, but featuring metallic rods in the outermost regions, for the design of extremely-high quality factor, bandgap-based, accelerating resonators. In this framework, we consider diverse configurations, with different (periodic and aperiodic) lattice geometries, sizes, and dielectric/metal fractions. Moreover, we also explore possible improvements attainable via the use of superconducting plates to confine the electromagnetic field in the longitudinal direction. Results from our comparative studies, based on numerical full-wave simulations backed by experimental validations (at room and cryogenic temperatures) in the microwave region, identify the candidate parametric configurations capable of yielding the highest quality factor.Comment: 13 pages, 5 figures, 3 tables. One figure and one reference added; minor changes in the tex

The impact on disability of initial treatment with methotrexate in patients with rheumatoid arthritis: results from the MARI study

The study aimed to assess in a population of subjects with rheumatoid arthritis (RA) treated with methotrexate (MTX) how the initial approach to the treatment influenced subsequent disability. We performed a cross-sectional analysis of data collected during the baseline visit of the MARI study, a multicenter observational study on patients with RA on treatment with MTX for at least 12 months. Subjects who fulfilled the Health Assessment Questionnaire (HAQ) were included in the evaluation. For every patient we retrospectively evaluated the disease duration, the duration of symptoms before the diagnosis, the time elapsed before first MTX treatment, the initial MTX dose, and the concomitant medications in the first six months of therapy. Disability was defined as a DI-HAQ score ≥1. The study population included 1015 subjects. Patients with a DI-HAQ score ≥1 had a longer duration of symptoms before diagnosis, a higher delay in treatment initiation, a lower initial dose of MTX and a more frequent co-treatment with symptomatic drugs. Disability was found less frequently in subjects treated with other concomitant disease modifying anti-rheumatic drugs (DMARDs) but not with biological agents. Logistic regression analysis identified as significant predictors of disability: older age, female sex, a longer time to complete diagnosis, a delay in starting MTX treatment higher than 6 months, and a concomitant treatment with symptomatic drugs, while a combination therapy with other DMARDs was associated with a lower risk of disability. A late diagnosis and a delay in starting a treatment with MTX are associated with poorer functional outcomes in patients with RA

Brownian bridges to submanifolds

We introduce and study Brownian bridges to submanifolds. Our method involves proving a general formula for the integral over a submanifold of the minimal heat kernel on a complete Riemannian manifold. We use the formula to derive lower bounds, an asymptotic relation and derivative estimates. We also see a connection to hypersurface local time. This work is motivated by the desire to extend the analysis of path and loop spaces to measures on paths which terminate on a submanifold

A parametric study of the lensing properties of dodecagonal photonic quasicrystals

We present a study of the lensing properties of two-dimensional (2-D) photonic quasicrystal (PQC) slabs made of dielectric cylinders arranged according to a 12-fold-symmetric square-triangle aperiodic tiling. Our full-wave numerical analysis confirms the results recently emerged in the technical literature and, in particular, the possibility of achieving focusing effects within several frequency regions. However, contrary to the original interpretation, such focusing effects turn out to be critically associated to local symmetry points in the PQC slab, and strongly dependent on its thickness and termination. Nevertheless, our study reveals the presence of some peculiar properties, like the ability to focus the light even for slabs with a reduced lateral width, or beaming effects, which render PQC slabs potentially interesting and worth of deeper investigation. Key words: Photonic quasicrystals; negative refraction; superlensing.Comment: 12 pages, 8 figures, to be pubblished in Photonics and Nanostructures - Fundamentals and Application