46 research outputs found
Pseudoelasticity and Shape Memory Effect in Single Crystal Fe\u3csub\u3e3\u3c/sub\u3eAl
Fe3Al is an intermetallic compound which has shown some excellent engineering properties and has been widely studied for this reason. It also shows interesting mechanical phenomenon like yield stress anomaly and pseudoelasticity. Mechanical behavior and diffraction studies on the pseudoelastic aspect of Fe3Al have been presented in this work.
Single crystalline, D03 ordered Fe3Al is known to show pseudoelastic behavior at room temperature. Pseudoelastic behavior was seen in both tension and compression with a distinct tension-compression asymmetry. No strain hardening occurred under tension even at high applied strains as opposed to compression, where the alloy strain hardened continuously. In-situ observations on the surface revealed reversible features indicating activity on the (211) planes.
The tensile stress-strain curve shows notable changes with varying temperature. At very low temperatures (~100 K) shape memory effect is seen for small amounts (~3% in compression) of applied strain. At high temperatures (~393 K) pseudoelasticity is lost and plasticity commences. Between these two extremes, the reverse stress (stress during strain recovery) follows the Clausius-Clayperon type relationship with temperature but the forward stress remains unchanged.
In-situ Neutron Diffraction experiments in both tension and compression show large reversible changes in the diffraction pattern upon loading. Intensities and position of various peaks changed reversibly by large amounts during the load-unload cycle. All changes in the diffraction pattern revert back close to the original pattern upon unloading. These changes are closely correlated to the load-unload stress-strain curve. These large changes in the diffraction pattern point towards major structural changes inside the crystal and cannot be explained by elastic effects alone.
Closer inspection revealed the appearance of new peaks and satellite reflections on loading, which disappeared upon unloading. Diffraction experiments point towards a phase transformation which might be responsible for the pseudoelastic behavior in Fe3Al
Synergistic deformation pathways in a TWIP steel at cryogenic temperatures:in situ neutron diffraction
Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates
Cold spray (CS) is a solid-state additive material deposition technique, which has gained attention in the aerospace industry as a potentially viable technology for structural repair of high-value parts made of high-strength alloys such as Ti-6Al-4V (Ti-64). Residual stresses build up in the substrate and deposited materials resulting from the CS process can influence the integrity of a coating or repair. However, the nature, magnitude and distribution of residual stresses in Ti-64/Ti-64 CS repairs are currently unknown. This study aims to evaluate the effects of geometrical variables (i.e. the number of CS layers, CS layer thickness, and substrate thickness) and track pattern on the magnitude and distribution of residual stresses in CS deposit-substrate assemblies. Through-thickness stress distributions were measured experimentally by neutron diffraction and contour method. Furthermore, a comparison among different residual stress build-up mechanisms induced by CS processes has been discussed for different combinations of substrate and deposit assemblies. An analytical model based on the force and moment equilibrium requirements was used to interpret the experimental stress profiles and to predict the residual stress distribution. It was found that residual stresses are highly tensile near the free surface of the Ti-64 deposits as well as towards the bottom of the substrate, and compressive near the interface region. Although all the specimens showed similar stress distribution, the magnitudes were found to be higher in one or more of the following cases: specimens with a higher number of CS layers, lower substrate thickness, higher layer thickness (i.e. at lower scanning speed), and deposited with a horizontal track pattern
RESEARCH ON FORMULATION AND EVALUATION OF INSITU MUCOADHESIVE NASAL GELS OF METOCLOPRAMIDE HYDROCHLORIDE
ABSTRACT The prolonged residence of drug formulation in the nasal cavity is of utmost importance for intranasal drug delivery. The objective of the present investigation was to develop a mucoadhesive in situ gel with reduced nasal mucocilliary clearance in order to improve the bioavailability of the antiemetic drug, Metoclopramide Hydrochloride. The in situ gelation upon contact with nasal mucosa was conferred via the use of the thermogelling Methyl cellulose whereas mucoadhesion and drug release enhancement were modulated via the use of sodium alginate and polyethylene glycol polymers respectively. The results revealed that the mucoadhesive polymer increased the gel viscosity but reduced its sol gel transition temperatures and the drug release. The inclusion of polyethylene glycol polymer counteracted the effect of mucoadhesive polymer where by it decreased the gel consistency and increased the sol gel transition as well as in vitro drug diffusion. The in vitro tests performed for mucoadhesive strength and drug diffusion showed that nasal in situ gelling formulations prepared are having good mucoadhesive strength with nearly100percente drug diffusion within four hours. So this study points to the potential of mucoadhesive in situ nasal gel in terms of ease of administration, accuracy of dosing, prolonged nasal residence and improved nasal bioavailability.  Keywords: Nasal Gel, Metoclopramide Hydrochloride, Methyl Cellulose, Mucocilliary Clearance
Texture analysis with a time-of-flight neutron strain scanner
A time-of-flight (TOF) neutron strain scanner is a white-beam instrument optimized to measure diffractograms at precise locations within bulky specimens, typically along two perpendicular sample orientations. Here, a method is proposed that exploits the spatial resolution (∼1 mm) provided by such an instrument to determine in a nondestructive manner the crystallographic texture at selected locations within a macroscopic object. The method is based on defining the orientation distribution function (ODF) of the crystallites from several incomplete pole figures, and it has been implemented on ENGIN-X, a neutron strain scanner at the ISIS facility in the UK. This method has been applied to determine the texture at different locations of Al alloy plates welded along the rolling direction and to study a Zr2.5%Nb pressure tube produced for a CANDU nuclear power plant. For benchmarking, the results obtained with this instrument for samples of ferritic steel, copper, Al alloys and Zr alloys have been compared with measurements performed using conventional X-ray diffractometers and more established neutron techniques. For cases where pole figure coverage is incomplete, the use of TOF neutron transmission measurements simultaneously performed on the specimens is proposed as a simple and powerful test to validate the resulting ODF.Fil: Malamud, Florencia. Comisión Nacional de EnergÃa Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de FÃsica (Centro Atómico Bariloche); Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Santisteban, Javier Roberto. Comisión Nacional de EnergÃa Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de FÃsica (Centro Atómico Bariloche); Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Vicente Alvarez, Miguel Angel. Comisión Nacional de EnergÃa Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de FÃsica (Centro Atómico Bariloche); Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Bolmaro, Raul Eduardo. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Centro CientÃfico Tecnológico Rosario. Instituto de FÃsica de Rosario (i); ArgentinaFil: Kelleher, Joe. ISIS Neutron and Muon Source; Reino UnidoFil: Kabra, Saurabh. ISIS Neutron and Muon Source; Reino UnidoFil: Kockelmann, Winfried. ISIS Neutron and Muon Source; Reino Unid
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys close to liquid helium temperatures
Medium- and high-entropy alloys based on the CrCoNi-system have been shown to
display outstanding strength, tensile ductility and fracture toughness
(damage-tolerance properties), especially at cryogenic temperatures. Here we
examine the JIc and (back-calculated) KJIc fracture toughness values of the
face-centered cubic, equiatomic CrCoNi and CrMnFeCoNi alloys at 20 K. At flow
stress values of ~1.5 GPa, crack-initiation KJIc toughnesses were found to be
exceptionally high, respectively 235 and 415 MPa(square-root)m for CrMnFeCoNi
and CrCoNi, with the latter displaying a crack-growth toughness Kss exceeding
540 MPa(square-root)m after 2.25 mm of stable cracking, which to our knowledge
is the highest such value ever reported. Characterization of the crack-tip
regions in CrCoNi by scanning electron and transmission electron microscopy
reveal deformation structures at 20 K that are quite distinct from those at
higher temperatures and involve heterogeneous nucleation, but restricted
growth, of stacking faults and fine nano-twins, together with transformation to
the hexagonal closed-packed phase. The coherent interfaces of these features
can promote both the arrest and transmission of dislocations to generate
respectively strength and ductility which strongly contributes to sustained
strain hardening. Indeed, we believe that these nominally single-phase,
concentrated solid-solution alloys develop their fracture resistance through a
progressive synergy of deformation mechanisms, including dislocation glide,
stacking-fault formation, nano-twinning and eventually in situ phase
transformation, all of which serve to extend continuous strain hardening which
simultaneously elevates strength and ductility (by delaying plastic
instability), leading to truly exceptional resistance to fracture.Comment: 31 pages, 10 figures, including Supplementary Informatio
Characterisation of nanovoiding in dental porcelain using small angle neutron scattering and transmission electron microscopy
Objectives Recent studies of the yttria partially stabilised zirconia–porcelain interface have revealed the presence of near-interface porcelain nanovoiding which reduces toughness and leads to component failure. One potential explanation for these nanoscale features is thermal creep which is induced by the combination of the residual stresses at the interface and sintering temperatures applied during manufacture. The present study provides improved understanding of this important phenomenon. Methods Transmission electron microscopy and small angle neutron scattering were applied to a sample which was crept at 750 °C and 100 MPa (sample C), a second which was exposed to an identical heat treatment schedule in the absence of applied stress (sample H), and a reference sample in the as-machined state (sample A). Results The complementary insights provided by the two techniques were in good agreement and log-normal void size distributions were found in all samples. The void number density was found to be 1.61 μm−2, 25.4 μm−2 and 98.6 μm−2 in samples A, H and C respectively. The average void diameter in sample A (27.1 nm) was found to be more than twice as large as in samples H (10.2 nm) and C (11.6 nm). The crept data showed the highest skewness parameter (2.35), indicating stress-induced growth of larger voids and void coalescence that has not been previously observed. Significance The improved insight presented in this study can be integrated into existing models of dental prostheses in order to optimise manufacturing routes and thereby reduce the significant detrimental impact of this nanostructural phenomenon.</p
Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere
High material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. This paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 °C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition, examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. This covers a broad field of research from fundamental to technological investigations of various types of materials and components
Auto-generating databases of Yield Strength and Grain Size using ChemDataExtractor.
The emerging field of material-based data science requires information-rich databases to generate useful results which are currently sparse in the stress engineering domain. To this end, this study uses the'materials-aware' text-mining toolkit, ChemDataExtractor, to auto-generate databases of yield-strength and grain-size values by extracting such information from the literature. The precision of the extracted data is 83.0% for yield strength and 78.8% for grain size. The automatically-extracted data were organised into four databases: a Yield Strength, Grain Size, Engineering-Ready Yield Strength and Combined database. For further validation of the databases, the Combined database was used to plot the Hall-Petch relationship for, the alloy, AZ31, and similar results to the literature were found, demonstrating how one can make use of these automatically-extracted datasets