DC current flow controllers for meshed HVDC grids

Premi Extraordinari de Doctorat, promoció 2018-2019. Àmbit d’Enginyeria IndustrialMeshed High Voltage Direct Current (HVDC) grids are seen as solution to transmit and exchange high amounts of power across long distances or using submarine cables with high levels of flexibility and redundancy. Also, they can be especially suitable to integrate offshore energy resources such as offshore wind power plants. This thesis focuses on the DC Current Flow Controllers (CFC) for meshed HVDC grids. The CFCs are being thought as power electronics based devices that may be installed in future meshed HVDC grids to aid in the current flow regulation. The concept is similar to Flexible Alternating Current Transmission Systems (FACTS) but applied to HVDC grids. First, an overview of the different CFC concepts proposed in the literature is presented. Then, the modelling and control of a DC/DC CFC converter is developed and the benefits of installing it in a meshed HVDC grid are analysed. The functionality of the previous CFC is also integrated into a DC Circuit Breaker, in order to have a single device with both capability to interrupt DC faults and provide DC current regulation. Afterwards, an interline DC/DC CFC topology is proposed, which has the advantage of a simplified converter structure. It is validated using dynamic simulations and a prototype is built and tested in a meshed DC grid experimental platform. A single CFC may not be enough to regulate the current flows in complex meshed HVDC grids, thus, this work also considers the concept of Distributed CFCs (DCFC) in a meshed HVDC grid, which are being operated selectively, allowing more flexibility when regulating the current flows. Also, multiple lines can be connected to a certain HVDC node. Therefore, the proposed CFC is extended to be connected to any number of HVDC lines and so, be able to control the current circulating through any of them. The obtained multi-port CFC is validated through simulations. Other devices can help to the current regulation in meshed HVDC grids, for example already installed DC/DC converters that adapt the different voltages of the HVDC systems. A transformerless DC/DC topology is analysed in this work and the design of its AC filter addressed. Finally, taking into account that some HVDC links based on Line Commutated Converters (LCC-HVDC) are installed near to potential offshore wind power resources, this work studies the operation and control of a Current Source Converter (CSC) based tapping station connected in series with the HVDC link to integrate offshore wind power.Les xarxes d'alta tensió mallades en contínua, meshed High voltatge Direct Current (HVDC) grids, es presenten com una solució per transportar grans quantitats d'energia a través de llargues distàncies o mitjançant cables submarins amb alts nivells de flexibilitat i redundància. També, són especialment adequades per la captació d'energia de parcs eòlics marins. Aquesta tesi se centra en els controladors del flux de corrent, Current Flow Controllers (CFC), per a xarxes HVDC mallades. Els CFC es plantegen com dispositius d'electrònica de potència que es podrien instal·lar en les futures xarxes HVDC mallades per tal d'ajudar en la regulació dels fluxos de corrent de les línies. Aquest concepte és similar als dispositius FACTS (Flexible AC Transmission Systems), però aplicat a xarxes HVDC. Primer, es realitza un recull de les diferents propostes de CFCs a la literatura. Després, es modelitza i es dissenya el control d'un convertidor DC/DC CFC i s'analitzen els beneficis d'instal·lar-lo en una xarxa HVDC mallada. La funcionalitat de l'anterior CFC s'inclou en els interruptors de contínua, DC Circuit Breakers (DCCB), per tal de tenir un dispositiu amb capacitat d'interropre faltes DC i també controlar corrents. A continuació, es proposa una topologia de CFC simplicada, que es valida per mitjà de simulacions i se'n construeix un prototip que es prova experimentalment al laboratori. Un únic CFC pot no ser suficient per a controlar els fluxos de corrent en xarxes HVDC mallades d'una certa complexitat. És per això, que també s'introdueix el concepte de CFCs distribuïts en diferents nodes de la xarxa i que s'operen de forma selectiva. Vàries línies HVDC poden estar connectades a un node, per aquest motiu, la topologia de CFC anteriorment presentada s'actualitza per tal de poder ser connectada a un nombre qualsevol de línies. La topologia multi-port obtinguda es valida per mitjà de simulacions. Altres dispositius que poden ajudar a controlar els fluxos de corrent són els propis convertidors DC/DC que s'encarreguen d'adaptar la tensió dels sistemes HVDC. S'analitza també un convertidor DC/DC sense transformador AC i es realitza el disseny del seu filtre AC. Finalment, algunes de les línies HVDC basades en tecnologia Line Commutated Converter (LCC) es troben a prop de zones amb energia eòlica potencial. Per aquest motiu, s'estudia l'operació i control d'un convertidor Current Source Converter (CSC) que actua com una estació de tapping per tal d'injectar l'energia d'un parc eòlic marí a la línia LCC-HVDC.Award-winningPostprint (published version

DC current flow controllers for meshed HVDC grids

Meshed High Voltage Direct Current (HVDC) grids are seen as solution to transmit and exchange high amounts of power across long distances or using submarine cables with high levels of flexibility and redundancy. Also, they can be especially suitable to integrate offshore energy resources such as offshore wind power plants. This thesis focuses on the DC Current Flow Controllers (CFC) for meshed HVDC grids. The CFCs are being thought as power electronics based devices that may be installed in future meshed HVDC grids to aid in the current flow regulation. The concept is similar to Flexible Alternating Current Transmission Systems (FACTS) but applied to HVDC grids. First, an overview of the different CFC concepts proposed in the literature is presented. Then, the modelling and control of a DC/DC CFC converter is developed and the benefits of installing it in a meshed HVDC grid are analysed. The functionality of the previous CFC is also integrated into a DC Circuit Breaker, in order to have a single device with both capability to interrupt DC faults and provide DC current regulation. Afterwards, an interline DC/DC CFC topology is proposed, which has the advantage of a simplified converter structure. It is validated using dynamic simulations and a prototype is built and tested in a meshed DC grid experimental platform. A single CFC may not be enough to regulate the current flows in complex meshed HVDC grids, thus, this work also considers the concept of Distributed CFCs (DCFC) in a meshed HVDC grid, which are being operated selectively, allowing more flexibility when regulating the current flows. Also, multiple lines can be connected to a certain HVDC node. Therefore, the proposed CFC is extended to be connected to any number of HVDC lines and so, be able to control the current circulating through any of them. The obtained multi-port CFC is validated through simulations. Other devices can help to the current regulation in meshed HVDC grids, for example already installed DC/DC converters that adapt the different voltages of the HVDC systems. A transformerless DC/DC topology is analysed in this work and the design of its AC filter addressed. Finally, taking into account that some HVDC links based on Line Commutated Converters (LCC-HVDC) are installed near to potential offshore wind power resources, this work studies the operation and control of a Current Source Converter (CSC) based tapping station connected in series with the HVDC link to integrate offshore wind power.Les xarxes d'alta tensió mallades en contínua, meshed High voltatge Direct Current (HVDC) grids, es presenten com una solució per transportar grans quantitats d'energia a través de llargues distàncies o mitjançant cables submarins amb alts nivells de flexibilitat i redundància. També, són especialment adequades per la captació d'energia de parcs eòlics marins. Aquesta tesi se centra en els controladors del flux de corrent, Current Flow Controllers (CFC), per a xarxes HVDC mallades. Els CFC es plantegen com dispositius d'electrònica de potència que es podrien instal·lar en les futures xarxes HVDC mallades per tal d'ajudar en la regulació dels fluxos de corrent de les línies. Aquest concepte és similar als dispositius FACTS (Flexible AC Transmission Systems), però aplicat a xarxes HVDC. Primer, es realitza un recull de les diferents propostes de CFCs a la literatura. Després, es modelitza i es dissenya el control d'un convertidor DC/DC CFC i s'analitzen els beneficis d'instal·lar-lo en una xarxa HVDC mallada. La funcionalitat de l'anterior CFC s'inclou en els interruptors de contínua, DC Circuit Breakers (DCCB), per tal de tenir un dispositiu amb capacitat d'interropre faltes DC i també controlar corrents. A continuació, es proposa una topologia de CFC simplicada, que es valida per mitjà de simulacions i se'n construeix un prototip que es prova experimentalment al laboratori. Un únic CFC pot no ser suficient per a controlar els fluxos de corrent en xarxes HVDC mallades d'una certa complexitat. És per això, que també s'introdueix el concepte de CFCs distribuïts en diferents nodes de la xarxa i que s'operen de forma selectiva. Vàries línies HVDC poden estar connectades a un node, per aquest motiu, la topologia de CFC anteriorment presentada s'actualitza per tal de poder ser connectada a un nombre qualsevol de línies. La topologia multi-port obtinguda es valida per mitjà de simulacions. Altres dispositius que poden ajudar a controlar els fluxos de corrent són els propis convertidors DC/DC que s'encarreguen d'adaptar la tensió dels sistemes HVDC. S'analitza també un convertidor DC/DC sense transformador AC i es realitza el disseny del seu filtre AC. Finalment, algunes de les línies HVDC basades en tecnologia Line Commutated Converter (LCC) es troben a prop de zones amb energia eòlica potencial. Per aquest motiu, s'estudia l'operació i control d'un convertidor Current Source Converter (CSC) que actua com una estació de tapping per tal d'injectar l'energia d'un parc eòlic marí a la línia LCC-HVDC

Operation and control of a current source converter series tapping of an LCC-HVDC link for integration of offshore wind power plants

This work presents a series tapping station for integrating Offshore Wind Power Plants (OWPP) into a (Line Commutated Converter High Voltage Direct Current) LCC-HVDC transmission system. The tapping station allows to integrate wind power resources without building a new HVDC link and it is based on a Current Source Converter (CSC). However, the CSC requires a minimum DC current to extract the power coming from the OWPP which may not be guaranteed depending on the power conditions of the HVDC corridor. For this reason, this paper proposes a coordinated operation and control of the CSC and the OWPP. A steady-state analysis is performed to determine the appropriate AC voltage level of the CSC. A power reduction algorithm is presented to limit power extraction during a reduction in the current of the HVDC transmission system and under loss of communications between the CSC and the OWPP. The proposed algorithm and the performance of the system are validated through simulation results.Peer ReviewedPostprint (author's final draft

Modelling and control of an interline Current Flow Controller for meshed HVDC grids

This article is focused on the modelling and control of an interline Current Flow Controller (CFC) for meshed HVDC grids. The operation states of the CFC are presented and an average model is derived. The average model is used to perform steady-state analysis on a 3-terminal meshed grid, showing the current change capabilities and the benefits on the operation area. The converter control is designed using a linearised model. The system performance of the CFC is tested by means of simulation in a 3-terminal grid and in a 5-terminal grid.Postprint (author's final draft

Fault mode operation strategies for dual H-bridge current flow controller in meshed HVDC grid

Peer ReviewedPreprin

Flexible converters for meshed HVDC grids: From Flexible AC Transmission Systems (FACTS) to Flexible DC grids

© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksFlexible Alternating Current Transmission Systems (FACTS) have achieved to enhance the flexibility of modern AC power systems, by providing fast, reliable and controllable solutions to steer the power flows and voltages in the network. The proliferation of High Voltage Direct Current (HVDC) transmission systems is leading to the opportunity of interconnecting several HVDC systems forming HVDC Supergrids. Such grids can eventually evolve to meshed systems which interconnect a number of different AC power systems and large scale offshore wind (or other renewable sources) power plants and clusters. While such heavily meshed systems can be considered futuristic and will not certainly happen in the near future, the sector is witnessing initial steps in this direction. In order to ensure the flexibility and controllability of meshed DC grids, the shunt connected AC-DC converters can be combined with additional simple and flexible DC-DC converters which can directly control current and power through the lines. The proposed DC-DC converters can provide a range of services to the HVDC grid, including power flow control capability, ancillary services for the HVDC grid or adjacent grids, stability improvement, oscillation damping, pole balancing and voltage control. The present paper presents relevant developments from industry and academia in the direction of the development of these converters, considering technical concepts, converter functionalities and possible integration with other existing systems. The paper explores a possible vision on the development of future meshed HVDC grids and discusses the role of the proposed converters in such grids.Postprint (published version

Optimal operation of hybrid high voltage direct current and alternating current networks based on OPF combined with droop voltage control

This study focuses on the operation and control of HVDC multi-terminal systems that transmit the power being generated in offshore wind farms to the terrestrial AC grids. The aim of the paper is to propose and validate an algorithm to ensure optimal operation of HVDC-HVAC systems. This algorithm is implemented in a central controller that, knowing the electrical characteristics of the DC and AC systems, the power generation from the wind farms and the power demand, executes periodically an AC/DC Optimal Power Flow (OPF) and sends the appropriate voltage references to the grid side converter's control. The voltage control of the DC grid is distributed and based on droop law, implemented in grid side converters. The droop offset is modified periodically so as to adapt to the actual operating conditions and ensure optimal operation according to a specified objective function. Dynamic simulations show the system optimal operation in terms of loss minimization under wind speed changes, loss of communications and demand variation. These results are validated experimentally after implementing the control scheme in an HVDC scaled experimental platform. Dynamic simulations are also performed to show that the system can still be operated based on the proposed strategy even during contingencies implying the disconnection of a power system element (converter and DC cable).Postprint (author's final draft

Optimal power flow operation of an interline current flow controller in an hybrid AC/DC meshed grid

This paper is meant to show that an interline Current Flow Controller (CFC) is able to reduce the operating costs of hybrid AC/DC meshed grids by alleviating the congestion within the DC lines. The work considers a unidirectional DC/DC CFC with a simple structure and its average model is introduced into the mathematical formulation of the Optimal Power Flow (OPF) problem of an hybrid AC/DC meshed grid, which also considers the losses of the Voltage Source Converters (VSC). The CFC restrictions and the different connection arrangements of the device into the AC/DC grid are also included in the model and show an important effect on the OPF solution. The case studies are conducted in a 5-terminal AC/DC meshed grid and point out that the CFC has a reduced capability to reduce the operating costs of the system if there are no overloads in the DC lines. However, when the power limit of one of the lines is reached, the CFC can redirect part of the DC current and, therefore, reduce the operating costs compared to the case without CFC.Postprint (author's final draft

DC current flow controllers for meshed HVDC grids

Meshed High Voltage Direct Current (HVDC) grids are seen as solution to transmit and exchange high amounts of power across long distances or using submarine cables with high levels of flexibility and redundancy. Also, they can be especially suitable to integrate offshore energy resources such as offshore wind power plants. This thesis focuses on the DC Current Flow Controllers (CFC) for meshed HVDC grids. The CFCs are being thought as power electronics based devices that may be installed in future meshed HVDC grids to aid in the current flow regulation. The concept is similar to Flexible Alternating Current Transmission Systems (FACTS) but applied to HVDC grids. First, an overview of the different CFC concepts proposed in the literature is presented. Then, the modelling and control of a DC/DC CFC converter is developed and the benefits of installing it in a meshed HVDC grid are analysed. The functionality of the previous CFC is also integrated into a DC Circuit Breaker, in order to have a single device with both capability to interrupt DC faults and provide DC current regulation. Afterwards, an interline DC/DC CFC topology is proposed, which has the advantage of a simplified converter structure. It is validated using dynamic simulations and a prototype is built and tested in a meshed DC grid experimental platform. A single CFC may not be enough to regulate the current flows in complex meshed HVDC grids, thus, this work also considers the concept of Distributed CFCs (DCFC) in a meshed HVDC grid, which are being operated selectively, allowing more flexibility when regulating the current flows. Also, multiple lines can be connected to a certain HVDC node. Therefore, the proposed CFC is extended to be connected to any number of HVDC lines and so, be able to control the current circulating through any of them. The obtained multi-port CFC is validated through simulations. Other devices can help to the current regulation in meshed HVDC grids, for example already installed DC/DC converters that adapt the different voltages of the HVDC systems. A transformerless DC/DC topology is analysed in this work and the design of its AC filter addressed. Finally, taking into account that some HVDC links based on Line Commutated Converters (LCC-HVDC) are installed near to potential offshore wind power resources, this work studies the operation and control of a Current Source Converter (CSC) based tapping station connected in series with the HVDC link to integrate offshore wind power.Les xarxes d'alta tensió mallades en contínua, meshed High voltatge Direct Current (HVDC) grids, es presenten com una solució per transportar grans quantitats d'energia a través de llargues distàncies o mitjançant cables submarins amb alts nivells de flexibilitat i redundància. També, són especialment adequades per la captació d'energia de parcs eòlics marins. Aquesta tesi se centra en els controladors del flux de corrent, Current Flow Controllers (CFC), per a xarxes HVDC mallades. Els CFC es plantegen com dispositius d'electrònica de potència que es podrien instal·lar en les futures xarxes HVDC mallades per tal d'ajudar en la regulació dels fluxos de corrent de les línies. Aquest concepte és similar als dispositius FACTS (Flexible AC Transmission Systems), però aplicat a xarxes HVDC. Primer, es realitza un recull de les diferents propostes de CFCs a la literatura. Després, es modelitza i es dissenya el control d'un convertidor DC/DC CFC i s'analitzen els beneficis d'instal·lar-lo en una xarxa HVDC mallada. La funcionalitat de l'anterior CFC s'inclou en els interruptors de contínua, DC Circuit Breakers (DCCB), per tal de tenir un dispositiu amb capacitat d'interropre faltes DC i també controlar corrents. A continuació, es proposa una topologia de CFC simplicada, que es valida per mitjà de simulacions i se'n construeix un prototip que es prova experimentalment al laboratori. Un únic CFC pot no ser suficient per a controlar els fluxos de corrent en xarxes HVDC mallades d'una certa complexitat. És per això, que també s'introdueix el concepte de CFCs distribuïts en diferents nodes de la xarxa i que s'operen de forma selectiva. Vàries línies HVDC poden estar connectades a un node, per aquest motiu, la topologia de CFC anteriorment presentada s'actualitza per tal de poder ser connectada a un nombre qualsevol de línies. La topologia multi-port obtinguda es valida per mitjà de simulacions. Altres dispositius que poden ajudar a controlar els fluxos de corrent són els propis convertidors DC/DC que s'encarreguen d'adaptar la tensió dels sistemes HVDC. S'analitza també un convertidor DC/DC sense transformador AC i es realitza el disseny del seu filtre AC. Finalment, algunes de les línies HVDC basades en tecnologia Line Commutated Converter (LCC) es troben a prop de zones amb energia eòlica potencial. Per aquest motiu, s'estudia l'operació i control d'un convertidor Current Source Converter (CSC) que actua com una estació de tapping per tal d'injectar l'energia d'un parc eòlic marí a la línia LCC-HVDC

Anàlisi i control de tipologies de convertidors per a parcs eòlics marins connectats en HVDC

Aquest projecte presenta l'anàlisi, modelització, el control i la simulació de dues tipologies de convertidors per a sistemes HVDC (High Voltage Direct Current). Els convertidors estudiats són els VSC (Voltage Source Converters) i els CSC (Current Source Converters), els quals formen un enllaç punt a punt en contínua entre la costa i un parc eòlic marí. També es realitza la modelització i control d'una turbina eòlica, i es fa ús d'un model agregat per tal de treballar amb un parc eòlic sencer. Es duu a terme la simulació dels enllaços HVDC amb el model agregat del parc, utilitzant els models promitjats dels VSC i CSC. Finalment, s'addiciona l'emulació d'una turbina eòlica a una plataforma experimental real. La plataforma en qüestió representa una xarxa multiterminal en contínua i consta de quatre màquines asíncrones d'inducció; dues de les quals emulen el vent i les altres dues, el generador. Els convertidors emprats són quatre VSC, dos d'ells actuen com a rectificadors enllaçats amb els generadors i els altres, com a inversors connectats a la xarxa alterna. L'emulació es duu a terme mitjançant l'entorn de programació LABVIEW de NATIONAL INSTRUMENTS. Es realitzen proves experimentals per tal de validar-ne la implementació