Chemical effects in ion mixing of a ternary system (metal-SiO_2)

The mixing of Ti, Cr, and Ni thin films with SiO_2 by low‐temperature (−196–25 °C) irradiation with 290 keV Xe has been investigated. Comparison of the morphology of the intermixed region and the dose dependences of net metal transport into SiO_2 reveals that long range motion and phase formation probably occur as separate and sequential processes. Kinetic limitations suppress chemical effects in these systems during the initial transport process. Chemical interactions influence the subsequent phase formation

The Intensity Profile of the Solar Supergranulation

We have measured the average radial (cell center to network boundary) profile of the continuum intensity contrast associated with supergranular flows using data from the Precision Solar Photometric Telescope (PSPT) at the Mauna Loa Solar Observatory (MLSO). After removing the contribution of the network flux elements by the application of masks based on Ca II K intensity and averaging over more than 10^5 supergranular cells, we find a ~ 0.1% decrease in red and blue continuum intensity from the supergranular cell centers outward, corresponding to a ~ 1.0 K decrease in brightness temperature across the cells. The radial intensity profile may be caused either by the thermal signal associated with the supergranular flows or a variation in the packing density of unresolved magnetic flux elements. These are not unambiguously distinguished by the observations, and we raise the possibility that the network magnetic fields play an active role in supergranular scale selection by enhancing the radiative cooling of the deep photosphere at the cell boundaries.Comment: Accepted to Ap

Methods for identifying surgical wound infection after discharge from hospital: a systematic review.

Background: Wound infections are a common complication of surgery that add significantly to the morbidity of patients and costs of treatment. The global trend towards reducing length of hospital stay post-surgery and the increase in day case surgery means that surgical site infections (SSI) will increasingly occur after hospital discharge. Surveillance of SSIs is important because rates of SSI are viewed as a measure of hospital performance, however accurate detection of SSIs post-hospital discharge is not straightforward. Methods: We conducted a systematic review of methods of post discharge surveillance for surgical wound infection and undertook a national audit of methods of post-discharge surveillance for surgical site infection currently used within United Kingdom NHS Trusts. Results: Seven reports of six comparative studies which examined the validity of post-discharge surveillance methods were located; these involved different comparisons and some had methodological limitations, making it difficult to identify an optimal method. Several studies evaluated automated screening of electronic records and found this to be a useful strategy for the identification of SSIs that occurred post discharge. The audit identified a wide range of relevant post-discharge surveillance programmes in England, Scotland and Wales and Northern Ireland; however, these programmes used varying approaches for which there is little supporting evidence of validity and/or reliability. Conclusion: In order to establish robust methods of surveillance for those surgical site infections that occur post discharge, there is a need to develop a method of case ascertainment that is valid and reliable post discharge. Existing research has not identified a valid and reliable method. A standardised definition of wound infection ( e. g. that of the Centres for Disease Control) should be used as a basis for developing a feasible, valid and reliable approach to defining post discharge SSI. At a local level, the method used to ascertain post discharge SSI will depend upon the purpose of the surveillance, the nature of available routine data and the resources available

Reciprocal Inhibition of Adiponectin and Innate Lung Immune Responses to Chitin and Aspergillus fumigatus

Chitin is a structural biopolymer found in numerous organisms, including pathogenic fungi, and recognized as an immune-stimulating pathogen associated molecular pattern by pattern recognition molecules of the host immune system. However, programming and regulation of lung innate immunity to chitin inhalation in the context of inhalation of fungal pathogens such as Aspergillus fumigatus is complex and our understanding incomplete. Here we report that the systemic metabolism-regulating cytokine adiponectin is decreased in the lungs and serum of mice after chitin inhalation, with a concomitant decrease in surface expression of the adiponectin receptor AdipoR1 on lung leukocytes. Constitutive lung expression of acidic mammalian chitinase resulted in decreased inflammatory cytokine gene expression and neutrophil recruitment, but did not significantly affect lung adiponectin transcription. Exogenous recombinant adiponectin specifically dampened airway chitin-mediated eosinophil recruitment, while adiponectin deficiency resulted in increased airway eosinophils. The presence of adiponectin also resulted in decreased CCL11-mediated migration of bone marrow-derived eosinophils. In contrast to purified chitin, aspiration of viable conidia from the high chitin-expressing A. fumigatus isolate Af5517 resulted in increased neutrophil recruitment and inflammatory cytokine gene expression in adiponectin-deficient mice, while no significant changes were observed in response to the isolate Af293. Our results identify a novel role for the adiponectin pathway in inhibition of lung inflammatory responses to chitin and A. fumigatus inhalation

Epitaxial-tau(Mn,Ni)Al/(Al,Ga)As heterostructures: Magnetic and magneto-optic properties

Ferromagnetic Perpendicularly magnetized epitaxial thin films of tau (Mn,Ni)AI have been successfully grown on AlAs/GaAs heterostructures by molecular beam epitaxy. We have investigated the polar Kerr rotation and magnetization of tau MnAl and (Mn,Ni) Al as a function of Mn and Ni concentration. The largest polar Kerr rotation and remnant magnetization were obtained for Mn0.5Al0.5 thin films with values of 0.16-degrees and 224 emu/cm3, respectively. We observed that the Kerr rotation and magnetization remained constant with Ni additions up to about 12 at. % and subsequently decreased with further Ni additions. We discuss these results and one possible method of enhancing the Kerr rotation

Non-Volatile Memory Characteristics of Submicrometre Hall Structures Fabricated in Epitaxial Ferromagnetic MnAl Films on GaAs

Hall-effect structures with submicrometre linewidths (<0.3pm) have been fabricated in ferromagnetic thin films of Mn[sub 0.60]Al[sub 0.40] which are epitaxially grown on a GaAs substrate. The MnAl thin films exhibit a perpendicular remanent magnetisation and an extraordinary Hall effect with square hysteretic behaviour. The presence of two distinct stable readout states demonstrates the potential of using ultrasmall ferromagnetic volumes for electrically addressable, nonvolatile storage of digital information

The extraordinary Hall effect in coherent epitaxial tau (Mn,Ni)Al thin films on GaAs

Ultrathin coherent epitaxial films of ferromagnetic tau(Mn,Ni)0.60Al0.40 have been grown by molecular beam epitaxy on GaAs substrates. X-ray scattering and cross-sectional transmission electron microscopy measurements confirm that the c axis of the tetragonal tau unit cell is aligned normal to the (001) GaAs substrate. Measurements of the extraordinary Hall effect (EHE) show that the films are perpendicularly magnetized, exhibiting EHE resistivities saturating in the range of 3.3-7.1 muOMEGA-cm at room temperature. These values of EHE resistivity correspond to signals as large as +7 and -7 mV for the two magnetic states of the film with a measurement current of 1 mA. Switching between the two magnetic states is found to occur at distinct field values that depend on the previously applied maximum field. These observations suggest that the films are magnetically uniform. As such, tau(Mn,Ni)Al films may be an excellent medium for high-density storage of binary information

FliPpr: A Prettier Invertible Printing System

When implementing a programming language, we often write a parser and a pretty-printer. However, manually writing both programs is not only tedious but also error-prone; it may happen that a pretty-printed result is not correctly parsed. In this paper, we propose FliPpr, which is a program transformation system that uses program inversion to produce a CFG parser from a pretty-printer. This novel approach has the advantages of fine-grained control over pretty-printing, and easy reuse of existing efficient pretty-printer and parser implementations