496 research outputs found
Reproducibility and validity of a food frequency questionnaire
OBJECTIVE: Methods to evaluate food consumption still need improvement. A study was conducted to verify the reproducibility and validity of a food frequency questionnaire (FFQ) among overweight adults. METHODS: The study was carried out in a private university in São Paulo, Brazil. The study sample consisted of 146 individuals of both sex with body mass index =25 kg/m² and age between 18 and 60 years old. For reproducibility the FFQ was applied by trained interviewers at two different instances with a mean interval time of 47 days. For validity, data collected from the FFQ were compared with those obtained from the average of 3 different daily records of a 24-hour dietary recall (mean interval time: 15 days). Validity and reproducibility of data on calories and macronutrients consumption was assessed using pondered kappa statistics and intraclass correlation coefficient. RESULTS: A higher variability in the reporting of regular food consumption was seen among obese than overweight individuals. Concerning reproducibility, kappa statistical values varied from 0.23 (carbohydrates and fats) to 0.40 (calories), and intraclass correlation coefficients ranged from 0.28 (protein) to 0.54 (total calories). For FFQ validity, the highest kappa value was 0.25 (calories), and the intraclass correlation coefficient was 0.21 (protein). CONCLUSIONS: Food consumption reports of overweight individuals tend to be underestimated. Despite its limitations, FFQ could be used in epidemiological studies to assess the regular food consumption of overweight individuals.OBJETIVO: Os métodos que avaliam o consumo alimentar são ainda imperfeitos. Assim, foi realizada pesquisa com o objetivo de verificar a reprodutibilidade e validade do Questionário de Freqüência de Consumo de Alimentos (QFCA) em população adulta com excesso de peso. MÉTODOS: O estudo foi realizado em uma instituição privada de ensino superior de São Paulo. A amostra teve 146 indivíduos, de ambos os sexos, com Índice de Massa Corporal =25kg/m² e idade entre 18 e 60 anos. Para o estudo de reprodutibilidade, o QFCA foi aplicado, mediante entrevista, em dois momentos separados com intervalo médio de 47 dias. No estudo de validade, as informações obtidas com o QFCA foram comparadas àquelas obtidas a partir da média de três dias de recordatório de 24h -- aplicado com intervalo médio de 15 dias. Verificaram-se a validade e a reprodutibilidade das informações referentes ao consumo de calorias e macronutrientes utilizando-se as estatísticas Kappa ponderado e o coeficiente de correlação intraclasse. RESULTADOS: Foi verificada maior variabilidade nos relatos de consumo habitual de alimentos entre os indivíduos obesos quando comparados àqueles com sobrepeso. Os valores da estatística kappa, para o estudo de reprodutibilidade, variaram de 0,23 (carboidratos e gorduras) a 0,40 (calorias), e os dos coeficientes de correlação intraclasse oscilaram de 0,28 (proteína) a 0,54 (calorias totais). No estudo de validade do QFCA, o maior valor de Kappa encontrado foi 0,25 (calorias), e o coeficiente de correlação intraclasse foi de 0,21 (proteína). CONCLUSÕES: Os relatos de consumo realizado por indivíduos com excesso de peso tendem a ser subestimados. Consideradas suas limitações, o QFCA poderá ser usado em estudos epidemiológicos para se conhecer o consumo alimentar habitual de indivíduos com excesso de peso.Universidade Metodista de São PauloUniversidade Federal de São Paulo (UNIFESP) Escola Paulista de Medicina Departamento de Medicina PreventivaUNIFESP, EPM, Depto. de Medicina PreventivaSciEL
BBBW on the spindle
We study the spindle compactification of families of AdS consistent
truncations corresponding to M5 branes wrapped on complex curves in Calabi-Yau
three-folds. From the AdS/CFT correspondence these models are dual to
SCFTs obtained by gluing of blocks. The truncations
considered here have both vector and hyper multiplets and the analysis of the
BPS equations on the spindle allows to extract the central charges. Such
analysis gives also consistency conditions for the existence of the solutions.
The solutions are then found both analytically and numerically for opportune
choices of the charges for some sub-families of truncations. We then compare
our results with the one expected from the field theory side, by integrating
the anomaly polynomial.Comment: 34 pages, 1 figur
Interface stability between bare, Mn-Co spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant
This document is the Accepted Manuscript version of the following article: A. G. Sabato, A. Crysanthou, M. Salvo, G. Tempura, and F. Smeacetto, ‘Interface stability between bare, Mn-Co spinel coated AISA 441 stainless steel and a diopside-based glass-ceramic sealant’, International Journal of Hydrogen Energy, Vol. 43 (13): 1824-1834, January 2018, made available under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives License CC BY NC-ND 4.0 ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is properly cited, and is not altered, transformed, or built upon in any way. Under embargo until 16 December 2018. The final, definitive version of this paper is available online at doi: https://doi.org/10.1016/j.ijhydene.2017.11.150.This study is focused on a diopside-based glass-ceramic sealant for solid oxide fuel cells and its compatibility with AISI 441 stainless steel interconnect. The morphological and chemical stability with both bare and Mn–Co spinel coated AISI 441 steel, after 3500 h exposure at 800 °C in air, is reviewed and discussed. Post-mortem samples are morphologically and chemically analysed by SEM-EDS. Reaction products at the glass-ceramic/bare AISI 441 interface, resulting from the reaction of Mg from the sealant and Cr and Mn from the steel, are detected, without affecting negatively the integrity of the joints. In the case of Mn–Co spinel coated AISI 441, interactions between the glass-ceramic and the outer part of the Mn–Co spinel coating, along with crystallization of oxides rich in Si and Mg, are detected, but still no corrosion phenomena are present. The glass-ceramic is found to be compatible with both bare and coated AISI 441.Peer reviewe
40 years of Acta Botanica Malacitana
40 años de Acta Botanica Malacitana. Se realiza una recensión de los 38 volúmenes de Acta Botanica Malacitana, así como de los dos números de Trabajos y Monografías del Departamento de Botánica. Así mismo se realiza un análisis bibliométrico y se construyen varios índices de autores, temáticas y novedades corológicas, taxonómicas y sintaxonómica
Characterization of the cyanobacterium Oscillatoria sp. isolated from extreme sulphureous water from Los Baños de la Hedionda (S Spain)
Los Baños de la Hedionda (Málaga, S Spain) is a natural sulphureous spa (150-200 µM sulphide). Although this high sulphide levels can affect the photosynthetic process, there are numerous photosynthetic microorganisms inhabiting the spa. Among them, we isolated a strain of the cyanobacterium Oscillatoria sp., a genus well known by its tolerance to sulphide.
Objectives
Firstly, to analyze the photosynthetic characteristics and growth rate of the isolated strain, as well as the effect of the presence of sulphide in both processes. Secondly, to determine the limit of genetic adaptation of this strain to sulphide.
Methods
The resistance of the isolated strain to sulphide was studied by analyzing the effect of increasing sulphide levels (up to 1600 µM) on photosynthetic performance and growth. The limit of genetic adaptation was explored using an evolutionary experimental design named as ratchet protocol. This design allows discerning the maximum capacity of genetic adaptation of Oscillatoria sp. to the exposure of increasing doses of sulphide
Conclusions
The strain showed maximum growth rates at 200 µM sulphide although reduced rates can be found up to 800 µM sulphide. A significant increase in resistance was achieved in all derived populations during the ratchet experiment (surviving at sulphide concentrations higher than 2 mM). Moreover, they showed different evolutionary potential to adapt to sulphide, depending on historical contingency.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.Spanish Ministry of Science and Innovation through CGL2014-53682-P project. Predoctoral State Grant from Scientific and Technical Research and Innovation Plan, Spanish Ministry of Economy, Industry and Competitiveness I+D+i ECC/1402/2013, 201
Disentangling mechanisms involved in the adaptation of the cyanobacterium Microcystis aeruginosa to the extreme sulphureous water from Los Baños de la Hedionda (S Spain)
Backgrounds
Los Baños de la Hedionda (Málaga, S Spain) is a natural sulphureous spa where sulphide can reach a concentration of 150-200 µM. Although this ion has biocide properties, including inhibition of the photosynthetic process, a rich flora can be found in this extreme environment.
Objectives
To study the adaptation mechanisms allowing resistance of photosynthetic microorganisms to these sulphureous waters
Methods
For this purpose, a modified Luria–Delbrück fluctuation analysis was carried out. The adaptation to La Hedionda waters of three different strains of the cyanobacterium Microcystis aeruginosa (Kützing) Kützing (isolated from a non-sulphureous freshwater reservoir) was analyzed in order to find out if it was achieved by a physiological adaptation process (acclimation) or by the selection of rare spontaneous mutations (genetic adaptation).
Conclusions
Several resistant strains were obtained after 6 weeks of cultivation with La Hedionda waters. The fluctuation analysis showed that genetic adaptation was the phenomenon that allowed resistant M. aeruginosa cells from the three strains to survive, with similar mutation rates in the order of magnitude of 1 mutant resistant cell per 106-107 cell division-1. It could be hypothesized that this cyanobacterium could adapt to sulphureous environment by the selection of favoured mutants.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.Spanish Ministry of Science and Innovation through CGL2014-53682-P project. Predoctoral State Grant from Scientific and Technical Research and Innovation Plan, Spanish Ministry of Economy, Industry and Competitiveness I+D+i ECC/1402/2013, 201
Multi-planarizable quivers, orientifolds, and conformal dualities
We study orientifold projections of families of four-dimensional
toric quiver gauge theories. We restrict to quivers that have
the unusual property of being associated with multiple periodic planar diagrams
which give rise, in general, to inequivalent models. A suitable orientifold
projection relates a subfamily of the latter by conformal duality. That is,
there exist exactly marginal deformations that connect the projected models.
The deformations take the form of a sign flip in some of the superpotential
interactions, similarly to the -deformation of SYM. Our
construction generalizes previous results on the orientifold projections of the
PdP and PdP singularities.Comment: 47 pages, 25 figures, 2 appendices. v2: Typos corrected, improved
text, 3 tables adde
Xenon Anesthesia Improves Respiratory Gas Exchanges in Morbidly Obese Patients
Background. Xenon-in-oxygen is a high density gas mixture and may improve PaO2/FiO2 ratio in morbidly obese patients uniforming distribution of ventilation during anesthesia. Methods. We compared xenon versus sevoflurane anesthesia in twenty adult morbidly obese patients (BMI > 35) candidate for roux-en-Y laparoscopic gastric bypass and assessed PaO2/FiO2 ratio at baseline, at 15 min from induction of anaesthesia and every 60 min during surgery. Differences in intraoperative and postoperative data including heart rate, systolic and diastolic pressure, oxygen saturation, plateau pressure, eyes opening and extubation time, Aldrete score on arrival to the PACU were compared by the Mann-Whitney test and were considered as secondary aims. Moreover the occurrence of side effects and postoperative analgesic demand were assessed. Results. In xenon group PaO2-FiO2 ratio was significantly higher after 60 min and 120 min from induction of anesthesia; heart rate and overall remifentanil consumption were lower; the eyes opening time and the extubation time were shorter; morphine consumption at 72 hours was lower; postoperative nausea was more common. Conclusions. Xenon anesthesia improved PaO2/FiO2 ratio and maintained its distinctive rapid recovery times and cardiovascular stability. A reduction of opioid consumption during and after surgery and an increased incidence of PONV were also observed in xenon group
- …