6,871 research outputs found

    Monitoring of strain and temperature in an open pit using brillouin distributed optical fiber sensors

    Get PDF
    Marble quarries are quite dangerous environments in which rock falls may occur. As many workers operate in these sites, it is necessary to deal with the matter of safety at work, checking and monitoring the stability conditions of the rock mass. In this paper, some results of an innovative analysis method are shown. It is based on the combination of Distributed Optical Fiber Sensors (DOFS), digital photogrammetry through Unmanned Aerial Vehicle (UAV), topographic, and geotechnical monitoring systems. Although DOFS are currently widely used for studying infrastructures, buildings and landslides, their use in rock marble quarries represents an element of peculiarity. The complex morphologies and the intense temperature range that characterize this environment make this application original. The selected test site is the Lorano open pit which is located in the Apuan Alps (Italy); here, a monitoring system consisting of extensometers, crackmeters, clinometers and a Robotic Total Station has been operating since 2012. From DOFS measurements, strain and temperature values were obtained and validated with displacement data from topographic and geotechnical instruments. These results may provide useful fundamental indications about the rock mass stability for the safety at work and the long-term planning of mining activities

    Slope stability analyses and geological risk reduction: two case studies, from engineering-geological characterization to rockfall runout modeling with intervention proposal

    Get PDF
    Rock slope instability is a major risk to human life, often leading to economic losses, property damage and maintenance costs, as well as injuries or death. Because the rock mass behavior is significantly governed by the presence of joints or other discontinuities, several types of slope failure such as plane failure, toppling failure, wedge failure, buckling failure and circular failure are often observed. These failures may be gradual with very slow movement of the sliding block or instantaneous without much warning. To understand this process, it is important to study the rock slope (geological data collections, geotechnical collections, data kinematic stability analysis, runout analyses
) This work is divided in two cases of studies, which are both complementary to study a rock slope stability: 1. The first case of study is an underground quarry of marble located in Levigliani (Luca, Italy), which we did a classification of the rockmass based on the empirical method of Bieniawski (RMR) and also a kinematic analysis of the conditions of stability with the software Rocscience Dips, after a 3D stability analysis was used by the software Rocscience Unwedge which was developed specifically for the use in underground rock mining; 2. For the second case of study is an ex open pit quarry of limestone located in Vecchiano (Pisa, Italy), in which we calculated the trajectories of falling blocks with an advanced numerical method (Rockyfor3D): rigid body approach, capable of analyzing the propagation phase of the volumes detached from the slope; methodology that allowed to simulate the rockfall phenomena through the production of block rebound mechanisms during the descent towards the slope and also we gave an intervention proposal to mitigate the risk; the localization and sizing of the blocks was done by a Digital Terrain Model (DTM)

    Fracture mapping in challenging environment: a 3D virtual reality approach combining terrestrial LiDAR and high definition images

    Get PDF
    ArticleThis is the author accepted manuscript. The final version is available from Springer Verlag via the DOI in this record.The latest technological developments in computer vision allow the creation of georeferenced, non-immersive desktop virtual reality (VR) environments. VR uses a computer to produce a simulated three-dimensional world in which it is possible to interact with objects and derive metric and thematic data. In this context, modern geomatic tools enable the remote acquisition of information that can be used to produce georeferenced high-definition 3D models: these can be used to create a VR in support of rock mass data processing, analysis, and interpretation. Data from laser scanning and high quality images were combined to map deterministically and characterise discontinuities with the aim of creating accurate rock mass models. Discontinuities were compared with data from traditional engineering-geological surveys in order to check the level of accuracy in terms of the attitude of individual joints and sets. The quality of data collected through geomatic surveys and field measurements in two marble quarries of the Apuan Alps (Italy) was very satisfactory. Some fundamental geotechnical indices (e.g. joint roughness, alteration, opening, moisture, and infill) were also included in the VR models. Data were grouped, analysed, and shared in a single repository for VR visualization and stability analysis in order to study the interaction between geology and human activities.The authors gratefully acknowledge the assistance of the personal of the Romana Quarry and particularly Corniani M. This paper was possible because of support from the Tuscany Region Research Project known as “Health and safety in the quarries of ornamental stones—SECURECAVE”. The authors acknowledge Pellegri M and Gullì D (Local Sanitary Agency n.1, Mining Engineering Operative Unit—Department of Prevention) and Riccucci S (Centre of GeoTechnologies, University of Siena) for their support of this research

    Optimal uniform strength design of frame and lattice structures

    Get PDF
    This paper provides a procedure to obtain the uniform strength of frame and lattice structures. Uniform strength condition is achieved by performing the shape optimization of all beam elements of the structure. The beam shape which guarantees uniform strength is analytically deduced from the one-dimensional Timoshenko model. The optimization problem presents itself as the search for the zeros of the objective-functions vector, which is a non-linear system of equations representing the kinematic-congruence and forces balance at every node of the structure. The analytical formulation of the optimization problem allows to construct the objective-functions vector without the use of external structural computation, i.e. not recurring to any Finite Element Analysis to accomplish iterations. This latter feature entails a great advantage in terms of computing time required to perform optimization. The proposed analytical formulation allows to directly insert the uniform strength condition into the objective-functions vector, transforming the optimization into an unconstrained problem. Some examples are shown in which the performance of the optimization procedure is discussed in terms of robustness and rate of computational complexity while increasing the degrees of freedom of the structure. The reliability and the quality of the optimization are verified through Finite Element Analysis

    Mechanical Properties of Porous Ceramics

    Get PDF
    It is widely known that increasing interest in porous ceramics is due to their special properties, which comprise high volumetric porosity (up to 90%) with open or closed pores, and a broad range of pore sizes (micropores: d  d > 2 nm and macropores: d > 50 nm). These properties have many uses comprehending macroscaled devices, mesoscaled materials and microscaled pieces. During their usage, these materials are usually submitted to thermal and/or mechanical loading stresses. Therefore, it is a premise to understand how these porous structures behave under thermomechanical stresses to design materials that show adequate properties for the required application. In this context, the aim of this chapter is to review the mechanical properties of macroporous ceramics

    Oral Lactoferrin in HIV-1 Vertically Infected Children: An Observational Follow-up of Plasma Viral Load and Immune Parameters

    Get PDF
    Lactoferrin (LF) is a mammalian iron-binding glycoprotein with antiviral effects. This preliminary study evaluated 6 months' LF (3 g/day, orally) treatment in 22 human immunodeficiency virus type 1 (HIV-1) vertically infected children. Plasma viral load and CD4+ cell counts were assessed every 3 months; before, during and after LF administration. No significant changes were observed during the pre-treatment period. By 6 months, mean (± SD) plasma viral load (log10) declined from 4.54 (± 0.65) to 4.28 (± 0.60); median percentage CD4+ cell count increased from 21.5% to 24.5%. Two months after treatment discontinuation, mean plasma viral load did not differ significantly from baseline or month 6 levels, but the percentage CD4+ cell count remained significantly higher than the baseline value. LF plus antiretroviral (ARV) therapy was more effective at increasing CD4+ cell count than LF alone. None of the patients showed any new HIV-1-related symptoms at follow-up. LF might be a useful addition to ARV therapy, ..

    Open-addressing hashing with unequal-probability keys

    Get PDF
    This paper describes the use of a drone in collecting data for mapping discontinuities within a marble quarry. A topographic survey was carried out in order to guarantee high spatial accuracy in the exterior orientation of images. Photos were taken close to the slopes and at different angles, depending on the orientation of the quarry walls. This approach was used to overcome the problem of shadow areas and to obtain detailed information on any feature desired. Dense three-dimensional (3D) point clouds obtained through image processing were used to rebuild the quarry geometry. Discontinuities were then mapped deterministically in detail. Joint attitude interpretation was not always possible due to the regular shape of the cut walls; for every discontinuity set we therefore also mapped the uncertainty. This, together with additional fracture characteristics, was used to build 3D discrete fracture network models. Preliminary results reveal the advantage of modern photogrammetric systems in producing detailed orthophotos; the latter allow accurate mapping in areas difficult to access (one of the main limitations of traditional techniques). The results highlight the benefits of integrating photogrammetric data with those collected through classical methods: the resulting knowledge of the site is crucially important in instability analyses involving numerical modelling.Part of the present study was undertaken within the framework of the Italian National Research Project PRIN2009, funded by the Ministry of Education, Universities and Research, which involves the collaboration between the University of Siena, ‘La Sapienza’ University of Rome, and USL1 of Massa and Carrara (Mining Engineering Operative Unit – Department of Prevention). The authors acknowledge M. Pellegri and D. Gullì (USL1, Mining Engineering Operative Unit – Department of Prevention), M. Ferrari, M. Profeti and V. Carnicelli (Cooperativa Cavatori Lorano), X. Chaoshui and P.A. Dowd (School of Civil, Environmental and Mining Engineering, University of Adelaide, South Australia) and M. Bocci (Geographike) for their support of this research
    • 

    corecore