F-16XL Wing Pressure Distributions and Shock Fence Results from Mach 1.4 to Mach 2.0

Chordwise pressure distributions were obtained in-flight on the upper and lower surfaces of the F-16XL ship 2 aircraft wing between Mach 1.4 and Mach 2.0. This experiment was conducted to determine the location of shock waves which could compromise or invalidate a follow-on test of a large chord laminar flow control suction panel. On the upper surface, the canopy closure shock crossed an area which would be covered by a proposed laminar flow suction panel. At the laminar flow experiment design Mach number of 1.9, 91 percent of the suction panel area would be forward of the shock. At Mach 1.4, that value reduces to 65 percent. On the lower surface, a shock from the inlet diverter would impinge on the proposed suction panel leading edge. A chordwise plate mounted vertically to deflect shock waves, called a shock fence, was installed between the inlet diverter and the leading edge. This plate was effective in reducing the pressure gradients caused by the inlet shock system

How Many Lymph Nodes Are Enough? Assessing the Adequacy of Lymph Node Yield for Staging in Favorable Histology Wilms Tumor

© 2019 Elsevier Inc. Purpose: Current investigational priorities in the treatment of favorable histology Wilms tumor (FHWT) center on accurate staging and risk-stratification. The extent of lymph node (LN) sampling has not been clearly defined; its importance cannot be overstated as it guides adjuvant therapy. The identification of a minimum LN yield to minimize the risk of harboring occult metastatic disease could help development of surgical guidelines. This study focuses on using the beta-binomial distribution to estimate the risk of occult metastatic disease in patients with FHWT. Materials & methods: The National Cancer Database was queried for patients with unilateral FHWT from 2004 to 2013. Data were used to characterize nodal positivity for patients who underwent surgery and had ≥ 1 positive LN and ≥ 2 LNs examined. The probability of missing a positive LN (i.e., false negative) for a given LN yield was calculated using an empirical estimation and the beta-binomial model. Patients were then stratified by tumor size. Results: 422 patients met study criteria. To limit the chance of missing a positive LN to ≤ 10%, the empirical estimation and beta-binomial model estimated that 6 and 10 LNs needed to be sampled, respectively. Tumor size did not influence the result. Internal validation showed little variation to maintain a false negative rate ≤ 10%. Conclusions: Using mathematical modeling, it appears that the desired LN yield in FHWT to reduce the risk of false-negative LN sampling to ≤ 10% is between 6 and 10. The current analysis represents an objective attempt to determine the desired surgical approach to LN sampling to accurately stage patients with FHWT. Level of evidence: I

Driven diffusion in a periodically compartmentalized tube: homogeneity versus intermittency of particle motion

We study the effect of a driving force F on drift and diffusion of a point Brownian particle in a tube formed by identical ylindrical compartments, which create periodic entropy barriers for the particle motion along the tube axis. The particle transport exhibits striking features: the effective mobility monotonically decreases with increasing F, and the effective diffusivity diverges as F → ∞, which indicates that the entropic effects in diffusive transport are enhanced by the driving force. Our consideration is based on two different scenarios of the particle motion at small and large F, homogeneous and intermittent, respectively. The scenarios are deduced from the careful analysis of statistics of the particle transition times between neighboring openings. From this qualitative picture, the limiting small-F and large-F behaviors of the effective mobility and diffusivity are derived analytically. Brownian dynamics simulations are used to find these quantities at intermediate values of the driving force for various compartment lengths and opening radii. This work shows that the driving force may lead to qualitatively different anomalous transport features, depending on the geometry design

Overview and preliminary results of the Surface Ocean Aerosol Production (SOAP) campaign

Establishing the relationship between marine boundary layer (MBL) aerosols and surface water biogeochemistry is required to understand aerosol and cloud production processes over the remote ocean and represent them more accurately in earth system models and global climate projections. This was addressed by the SOAP (Surface Ocean Aerosol Production) campaign, which examined air–sea interaction over biologically productive frontal waters east of New Zealand. This overview details the objectives, regional context, sampling strategy and provisional findings of a pilot study, PreSOAP, in austral summer 2011 and the following SOAP voyage in late austral summer 2012. Both voyages characterized surface water and MBL composition in three phytoplankton blooms of differing species composition and biogeochemistry, with significant regional correlation observed between chlorophyll a and DMSsw. Surface seawater dimethylsulfide (DMSsw) and associated air–sea DMS flux showed spatial variation during the SOAP voyage, with maxima of 25 nmol L−1 and 100 µmol m−2 d−1, respectively, recorded in a dinoflagellate bloom. Inclusion of SOAP data in a regional DMSsw compilation indicates that the current climatological mean is an underestimate for this region of the southwest Pacific. Estimation of the DMS gas transfer velocity (kDMS) by independent techniques of eddy covariance and gradient flux showed good agreement, although both exhibited periodic deviations from model estimates. Flux anomalies were related to surface warming and sea surface microlayer enrichment and also reflected the heterogeneous distribution of DMSsw and the associated flux footprint. Other aerosol precursors measured included the halides and various volatile organic carbon compounds, with first measurements of the short-lived gases glyoxal and methylglyoxal in pristine Southern Ocean marine air indicating an unidentified local source. The application of a real-time clean sector, contaminant markers and a common aerosol inlet facilitated multi-sensor measurement of uncontaminated air. Aerosol characterization identified variable Aitken mode and consistent submicron-sized accumulation and coarse modes. Submicron aerosol mass was dominated by secondary particles containing ammonium sulfate/bisulfate under light winds, with an increase in sea salt under higher wind speeds. MBL measurements and chamber experiments identified a significant organic component in primary and secondary aerosols. Comparison of SOAP aerosol number and size distributions reveals an underprediction in GLOMAP (GLObal Model of Aerosol Processes)-mode aerosol number in clean marine air masses, suggesting a missing marine aerosol source in the model. The SOAP data will be further examined for evidence of nucleation events and also to identify relationships between MBL composition and surface ocean biogeochemistry that may provide potential proxies for aerosol precursors and production

Perturbation theory for quantum-mechanical observables

The quantum-mechanical state vector is not directly observable even though it is the fundamental variable that appears in Schrodinger's equation. In conventional time-dependent perturbation theory, the state vector must be calculated before the experimentally-observable expectation values of relevant operators can be computed. We discuss an alternative form of time-dependent perturbation theory in which the observable expectation values are calculated directly and expressed in the form of nested commutators. This result is consistent with the fact that the commutation relations determine the properties of a quantum system, while the commutators often have a form that simplifies the calculation and avoids canceling terms. The usefulness of this method is illustrated using several problems of interest in quantum optics and quantum information processing.Comment: Submitted to Phys. Rev. A. 17 pages, 4 figures. Minor change

Surveillance for pancreatic cancer in high-risk individuals

Background Surveillance of individuals at high risk of pancreatic ductal adenocarcinoma (PDAC) and its precursors might lead to better outcomes. The aim of this study was to determine the prevalence and outcomes of PDAC and high-risk neoplastic precursor lesions among such patients participating in surveillance programmes. Methods A multicentre study was conducted through the International CAncer of the Pancreas Screening (CAPS) Consortium Registry to identify high-risk individuals who had undergone pancreatic resection or progressed to advanced PDAC while under surveillance. High-risk neoplastic precursor lesions were defined as: pancreatic intraepithelial neoplasia (PanIN) 3, intraductal papillary mucinous neoplasia (IPMN) with high-grade dysplasia, and pancreatic neuroendocrine tumours at least 2 cm in diameter. Results Of 76 high-risk individuals identified in 11 surveillance programmes, 71 had undergone surgery and five had been diagnosed with inoperable PDAC. Of the 71 patients who underwent resection, 32 (45 per cent) had PDAC or a high-risk precursor (19 PDAC, 4 main-duct IPMN, 4 branch-duct IPMN, 5 PanIN-3); the other 39 patients had lesions thought to be associated with a lower risk of neoplastic progression. Age at least 65 years, female sex, carriage of a gene mutation and location of a lesion in the head/uncinate region were associated with high-risk precursor lesions or PDAC. The survival of high-risk individuals with low-risk neoplastic lesions did not differ from that in those with high-risk precursor lesions. Survival was worse among patients with PDAC. There was no surgery-related mortality. Conclusion A high proportion of high-risk individuals who had surgical resection for screening- or surveillance-detected pancreatic lesions had a high-risk neoplastic precursor lesion or PDAC at the time of surgery. Survival was better in high-risk individuals who had either low- or high-risk neoplastic precursor lesions compared with that in patients who developed PDAC

Quantitative imaging of concentrated suspensions under flow

We review recent advances in imaging the flow of concentrated suspensions, focussing on the use of confocal microscopy to obtain time-resolved information on the single-particle level in these systems. After motivating the need for quantitative (confocal) imaging in suspension rheology, we briefly describe the particles, sample environments, microscopy tools and analysis algorithms needed to perform this kind of experiments. The second part of the review focusses on microscopic aspects of the flow of concentrated model hard-sphere-like suspensions, and the relation to non-linear rheological phenomena such as yielding, shear localization, wall slip and shear-induced ordering. Both Brownian and non-Brownian systems will be described. We show how quantitative imaging can improve our understanding of the connection between microscopic dynamics and bulk flow.Comment: Review on imaging hard-sphere suspensions, incl summary of methodology. Submitted for special volume 'High Solid Dispersions' ed. M. Cloitre, Vol. xx of 'Advances and Polymer Science' (Springer, Berlin, 2009); 22 pages, 16 fig