Effects of optical beam angle on quantitative optical coherence tomography (OCT) in normal and surface degenerated bovine articular cartilage

2010-2011 > Academic research: refereed > Publication in refereed journalAccepted ManuscriptPublishe

Depth-wise progression of osteoarthritis in human articular cartilage: investigation of composition, structure and biomechanics

SummaryObjectiveOsteoarthritis (OA) is characterized by the changes in structure and composition of articular cartilage. However, it is not fully known, what is the depth-wise change in two major components of the cartilage solid matrix, i.e., collagen and proteoglycans (PGs), during OA progression. Further, it is unknown how the depth-wise changes affect local tissue strains during compression. Our aim was to address these issues.MethodsData from the previous microscopic and biochemical measurements of the collagen content, distribution and orientation, PG content and distribution, water content and histological grade of normal and degenerated human patellar articular cartilage (n=73) were reanalyzed in a depth-wise manner. Using this information, a composition-based finite element (FE) model was used to estimate tissue function solely based on its composition and structure.ResultsThe orientation angle of collagen fibrils in the superficial zone of cartilage was significantly less parallel to the surface (P<0.05) in samples with early degeneration than in healthy samples. Similarly, PG content was reduced in the superficial zone in early OA (P<0.05). However, collagen content decreased significantly only at the advanced stage of OA (P<0.05). The composition-based FE model showed that under a constant stress, local tissue strains increased as OA progressed.ConclusionFor the first time, depth-wise point-by-point statistical comparisons of structure and composition of human articular cartilage were conducted. The present results indicated that early OA is primarily characterized by the changes in collagen orientation and PG content in the superficial zone, while collagen content does not change until OA has progressed to its late stage. Our simulation results suggest that impact loads in OA joint could create a risk for tissue failure and cell death

Iterative and discrete reconstruction in the evaluation of the rabbit model of osteoarthritis

Micro-computed tomography (µCT) is a standard method for bone morphometric evaluation. However, the scan time can be long and the radiation dose during the scan may have adverse effects on test subjects, therefore both of them should be minimized. This could be achieved by applying iterative reconstruction (IR) on sparse projection data, as IR is capable of producing reconstructions of sufficient image quality with less projection data than the traditional algorithm requires. In this work, the performance of three IR algorithms was assessed for quantitative bone imaging from low-resolution data in the evaluation of the rabbit model of osteoarthritis. Subchondral bone images were reconstructed with a conjugate gradient least squares algorithm, a total variation regularization scheme, and a discrete algebraic reconstruction technique to obtain quantitative bone morphometry, and the results obtained in this manner were compared with those obtained from the reference reconstruction. Our approaches were sufficient to identify changes in bone structure in early osteoarthritis, and these changes were preserved even when minimal data were provided for the reconstruction. Thus, our results suggest that IR algorithms give reliable performance with sparse projection data, thereby recommending them for use in µCT studies where time and radiation exposure are preferably minimized. © 2018, The Author(s).Peer reviewe

Design and development of poly-L/D-lactide copolymer and barium titanate nanoparticle 3D composite scaffolds using breath figure method for tissue engineering applications

In tissue engineering, the scaffold topography influences the adhesion, proliferation, and function of cells. Specifically, the interconnected porosity is crucial for cell migration and nutrient delivery in 3D scaffolds. The objective of this study was to develop a 3D porous composite scaffold for musculoskeletal tissue engineering applications by incorporating barium titanate nanoparticles (BTNPs) into a poly-L/D-lactide copolymer (PLDLA) scaffold using the breath figure method. The porous scaffold fabrication utilised 96/04 PLDLA, dioleoyl phosphatidylethanolamine (DOPE), and different types of BTNPs, including uncoated BTNPs, Al2O3-coated BTNPs, and SiO2-coated BTNPs. The BTNPs were incorporated into the polymer scaffold, which was subsequently analysed using field emission scanning electron microscopy (FE-SEM). The biocompatibility of each scaffold was tested using ovine bone marrow stromal stem cells. The cell morphology, viability, and proliferation were evaluated using FE-SEM, LIVE/DEAD staining, and Prestoblue assay. Porous 3D composite scaffolds were successfully produced, and it was observed that the incorporation of uncoated BTNPs increased the average pore size from 1.6 mu m (PLDLA) to 16.2 mu m (PLDLA/BTNP). The increased pore size in the PLDLA/BTNP scaffolds provided a suitable porosity for the cells to migrate inside the scaffold, while in the pure PLDLA scaffolds with their much smaller pore size, cells elongated on the surface. To conclude, the breath figure method was successfully used to develop a PLDLA/BTNP scaffold. The use of uncoated BTNPs resulted in a composite scaffold with an optimal pore size while maintaining the honeycomb-like structure. The composite scaffolds were biocompatible and yielded promising structures for future tissue engineering applications.Peer reviewe

Determining collagen distribution in articular cartilage using contrast-enhanced micro-computed tomography

Objective: Collagen distribution within articular cartilage (AC) is typically evaluated from histological sections, e.g., using collagen staining and light microscopy (LM). Unfortunately, all techniques based on histological sections are time-consuming, destructive, and without extraordinary effort, limited to two dimensions. This study investigates whether phosphotungstic acid (PTA) and phosphomolybdic acid (PMA), two collagen-specific markers and X-ray absorbers, could (1) produce contrast for AC X-ray imaging or (2) be used to detect collagen distribution within AC. Method: We labeled equine AC samples with PTA or PMA and imaged them with micro-computed tomography (micro-CT) at pre-defined time points 0, 18, 36, 54, 72, 90, 180, 270 h during staining. The micro-CT image intensity was compared with collagen distributions obtained with a reference technique, i.e., Fourier-transform infrared imaging (FTIRI). The labeling time and contrast agent producing highest association (Pearson correlation, BlandeAltman analysis) between FTIRI collagen distribution and micro-CT -determined PTA distribution was selected for human AC. Results: Both, PTA and PMA labeling permitted visualization of AC features using micro-CT in non-calcified cartilage. After labeling the samples for 36 h in PTA, the spatial distribution of X-ray attenuation correlated highly with the collagen distribution determined by FTIRI in both equine (mean +/- S.D. of the Pearson correlation coefficients, r = 0.96 +/- 0.03, n = 12) and human AC (r = 0.82 +/- 0.15, n = 4). Conclusions: PTA-induced X-ray attenuation is a potential marker for non-destructive detection of AC collagen distributions in 3D. This approach opens new possibilities in development of non-destructive 3D histopathological techniques for characterization of OA. (C) 2015 The Authors. Published by Elsevier Ltd and Osteoarthritis Research Society International.Peer reviewe

Comparison of ultrasonographic, radiographic and intra-operative findings in severe hip osteoarthritis

Aim of this study was to assess the US findings of patients with late-stage hip OA undergoing total hip arthroplasty (THA), and to associate the US findings with conventional radiography (CR) and intraoperative findings. Moreover, the inter-rater reliability of hip US, and association between the US and Oxford Hip Score (OHS) were evaluated. Sixty-eight hips were included, and intraoperative findings were available on 48 hips. Mean patient age was 67.6 years and 38% were males. OA findings—osteophytes at femoral collum and anterosuperior acetabulum, femoral head deformity and effusion—were assessed on US, CR and THA. The diagnostic performance of US and CR was compared by applying the THA findings as the gold standard. Osteoarthritic US findings were very common, but no association between the US findings and OHS was observed. The pooled inter-rater reliability (n = 65) varied from moderate to excellent (k = 0.538–0.815). When THA findings were used as the gold standard, US detected femoral collum osteophytes with 95% sensitivity, 0% specificity, 81% accuracy, and 85% positive predictive value. Concerning acetabular osteophytes, the respective values were 96%, 0%, 88% and 91%. For the femoral head deformity, they were 92%, 36%, 38% and 83%, and for the effusion 49%, 85%, 58% and 90%, respectively. US provides similar detection of osteophytes as does CR. On femoral head deformity, performance of the US is superior to CR. The inter-rater reliability of the US evaluation varies from moderate to excellent, and no association between US and OHS was observed in this patient cohort.</p

Effects of Articular Cartilage Constituents on Phosphotungstic Acid Enhanced Micro-Computed Tomography

Contrast-enhanced micro-computed tomography (CE mu CT) with phosphotungstic acid (PTA) has shown potential for detecting collagen distribution of articular cartilage. However, the selectivity of the PTA staining to articular cartilage constituents remains to be elucidated. The aim of this study was to investigate the dependence of PTA for the collagen content in bovine articular cartilage. Adjacent bovine articular cartilage samples were treated with chondroitinase ABC and collagenase to degrade the proteoglycan and the collagen constituents in articular cartilage, respectively. Enzymatically degraded samples were compared to the untreated samples using CE mu CT and reference methods, such as Fourier-transform infrared imaging. Decrease in the X-ray attenuation of PTA in articular cartilage and collagen content was observed in cartilage depth of 0-13% and deeper in tissue after collagen degradation. Increase in the X-ray attenuation of PTA was observed in the cartilage depth of 13- 39% after proteoglycan degradation. The X-ray attenuation of PTA-labelled articular cartilage in CE mu CT is associated mainly with collagen content but the proteoglycans have a minor effect on the X-ray attenuation of the PTA-labelled articular cartilage. In conclusion, the PTA labeling provides a feasible CE mu CT method for 3D characterization of articular cartilage.Peer reviewe

Ultrasonographic Assessment of the Normal Femoral Articular Cartilage of the Knee Joint: Comparison with 3D MRI

ObjectiveUltrasonography (US) has a promising role in evaluating the knee joint, but capability to visualize the femoral articular cartilage needs systematic evaluation. We measured the extent of this acoustic window by comparing standardized US images with the corresponding MRI views of the femoral cartilage.DesignTen healthy volunteers without knee pathology underwent systematic US and MRI evaluation of both knees. The femoral cartilage was assessed on the oblique transverse axial plane with US and with 3D MRI. The acoustic window on US was compared to the corresponding views of the femoral sulcus and both condyles on MRI. The mean imaging coverage of the femoral cartilage and the cartilage thickness measurements on US and MRI were compared.ResultsMean imaging coverage of the cartilage of the medial femoral condyle was 66% (range 54%–80%) and on the lateral femoral condyle 37% (range 25%–51%) compared with MRI. Mean cartilage thickness measurement in the femoral sulcus was 3.17 mm with US and 3.61 mm with MRI (14.0% difference). The corresponding measurements in the medial femoral condyle were 1.95 mm with US and 2.35 mm with MRI (21.0% difference), and in the lateral femoral condyle, they were 2.17 mm and 2.73 mm (25.6% difference), respectively.ConclusionTwo-thirds of the articular cartilage of the medial femoral condyle, and one-third in the lateral femoral condyle, can be assessed with US. The cartilage thickness measurements seem to be underestimated by US. These results show promise for the evaluation of the weight-bearing cartilage of the medial femoral condyle with US.</p

3D morphometric analysis of calcified cartilage properties using micro-computed tomography

Objective: Our aim is to establish methods for quantifying morphometric properties of calcified cartilage (CC) from micro-computed tomography (mu CT). Furthermore, we evaluated the feasibility of these methods in investigating relationships between osteoarthritis (OA), tidemark surface morphology and open subchondral channels (OSCCs). Method: Samples (n = 15) used in this study were harvested from human lateral tibial plateau (n = 8). Conventional roughness and parameters assessing local 3-dimensional (3D) surface variations were used to quantify the surface morphology of the CC. Subchondral channel properties (percentage, density, size) were also calculated. As a reference, histological sections were evaluated using Histopathological osteoarthritis grading (OARSI) and thickness of CC and subchondral bone (SCB) was quantified. Results: OARSI grade correlated with a decrease in local 3D variations of the tidemark surface (amount of different surface patterns (r(s) = -0.600, P = 0.018), entropy of patterns (EP) (r(s) = -0.648, P = 0.018), homogeneity index (HI) (r(s) = 0.555, P = 0.032)) and tidemark roughness (TMR) (r(s) = -0.579, P = 0.024). Amount of different patterns (ADP) and EP associated with channel area fraction (CAF) (r(p) = 0.876, P <0.0001; r(p) = 0.665, P = 0.007, respectively) and channel density (CD) (r(p) = 0.680, P = 0.011; r(p) = 0.582, P = 0.023, respectively). TMR was associated with CAF (r(p) = 0.926, P <0.0001) and average channel size (r(p) = 0.574, P = 0.025). CC topography differed statistically significantly in early OA vs healthy samples. Conclusion: We introduced a mu-CT image method to quantify 3D CC topography and perforations through CC. CC topography was associated with OARSI grade and OSCC properties; this suggests that the established methods can detect topographical changes in tidemark and CC perforations associated with OA. (c) 2018 The Authors. Published by Elsevier Ltd on behalf of Osteoarthritis Research Society International. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Peer reviewe