Unique walnut-shaped porous MnO<inf>2</inf>/C nanospheres with enhanced reaction kinetics for lithium storage with high capacity and superior rate capability

Unique walnut-shaped porous MnO2/carbon nanospheres via in situ carbonization of amorphous MnO2 nanospheres demonstrate enhanced reaction kinetics for lithium storage.This work is realized in the frame of a program for Changjiang Scholars and Innovative Research Team (IRT_15R52) of Chinese Ministry of Education. B. L. Su acknowledges the Chinese Central Government for an “Expert of the State” position in the Program of the “Thousand Talents” and a Life Membership at the Clare Hall, Cambridge and the financial support of the Department of Chemistry, University of Cambridge. Y. Li acknowledges Hubei Provincial Department of Education for the “Chutian Scholar” program. T. Hasan acknowledges funding from the Royal Academy of Engineering (Graphlex) and an Impact Acceleration Award (GRASS). This work is also financially supported by the National Science Foundation for Young Scholars of China (No. 21301133 and 51302204), International Science & Technology Cooperation Program of China (2015DFE52870) and and Self-determined and Innovative Research Funds of the SKLWUT (2015‐ZD‐7). The authors also would like to thank Dr. Bin-Jie Wang from Shanghai Nanoport (FEI, Shanghai) for TEM analysis, and thank Hang Ping from Wuhan University of Technology for the TGA/DSC tests.This is the author accepted manuscript. The final version is available from the Royal Society of Chemistry via http://dx.doi.org/10.1039/C6TA00594

CMOS integration of inkjet-printed graphene for humidity sensing.

We report on the integration of inkjet-printed graphene with a CMOS micro-electro-mechanical-system (MEMS) microhotplate for humidity sensing. The graphene ink is produced via ultrasonic assisted liquid phase exfoliation in isopropyl alcohol (IPA) using polyvinyl pyrrolidone (PVP) polymer as the stabilizer. We formulate inks with different graphene concentrations, which are then deposited through inkjet printing over predefined interdigitated gold electrodes on a CMOS microhotplate. The graphene flakes form a percolating network to render the resultant graphene-PVP thin film conductive, which varies in presence of humidity due to swelling of the hygroscopic PVP host. When the sensors are exposed to relative humidity ranging from 10-80%, we observe significant changes in resistance with increasing sensitivity from the amount of graphene in the inks. Our sensors show excellent repeatability and stability, over a period of several weeks. The location specific deposition of functional graphene ink onto a low cost CMOS platform has the potential for high volume, economic manufacturing and application as a new generation of miniature, low power humidity sensors for the internet of things.S.S. acknowledges Department of Science and Technology (DST), India for Ramanujan Fellowship to support the work (project no. SR/S2/RJN-104/2011). This work was (partly) supported through the EU FP7 project MSP (611887). T.H. acknowledges support from the Royal Academy of Engineering through a fellowship (Graphlex).This is the final version of the article. It was first available from NPG via http://dx.doi.org/10.1038/srep1737

Improving the mechanical behavior of pervious concrete using polypropylene and waste rope fibers

Urbanization has led to the damage of infrastructure due to floods and water accumulation on roads and sidewalks. To address this problem, pervious concrete was designed to drain water smoothly. However, pervious concrete has certain drawbacks, such as brittleness and poor tensile strength. To overcome these shortcomings, it is reinforced with fiber. Polypropylene fibers are commonly used for this purpose. On the other hand, managing waste plastic is a major problem as it has a significant environmental impact and requires large areas for landfills. Waste rope fibers (WRF) are among these wastes. There have been very limited investigations on the use of WRF in pervious concrete. Therefore, this study aims to investigate the effect of polypropylene (PP) fibers and waste rope fibers (WRF) on the mechanical and structural properties of pervious concrete. PP and WRF fibers were added in proportions of 0.25%, 0.5%, and 0.75% by volume of concrete. A range of tests (compressive strength, tensile strength, density, permeability, load-deflection behavior, and ductility) were conducted to evaluate the resulting concrete. The results indicated that although the permeability was decreased by adding fibers, the fibers significantly improved the mechanical and structural properties of pervious concrete. The highest values for compressive strength, splitting tensile strength, and ultimate load were 83.4%, 72.4%, and 89.62% for PP fibers-based mixtures, while they were 49.9%, 41.9%, and 102.83% for mixtures made with WRF at an addition rate of 0.5% for both types of fibers. The results also demonstrated that the existence of fibers improved the ductility of the concrete, which means that WRF can be used successfully in producing eco-friendly pervious concrete with better performance than the control specimen.</jats:p

Anchoring ultrafine metallic and oxidized Pt nanoclusters on yolk-shell TiO2 for unprecedentedly high photocatalytic hydrogen production

We demonstrate an alkali modification process to produce highly dispersed ultrafine Pt nanoclusters with metallic Pt$^0$ and oxidized Pt$^{2+}$ species as co-catalyst anchored on nanosheet-constructed yolk-shell TiO$_2$ (NYTiO$_2$-Pt) acting as light harvesting reactor for highly efficient photocatalytic H$_2$ production. Benefiting from the high surface area, highly dispersed ultrafine Pt nanoclusters (~0.6 nm) with Pt$^0$ and Pt$^{2+}$ species and special nanosheet-constructed yolk-shell structure, this novel light harvesting reactor exhibits excellent performance for photocatalytic H$_2$ production. The NYTiO$_2$-Pt-0.5 (0.188 wt% Pt) demonstrates an unprecedentedly high H$_2$ evolution rate of 20.88 mmol h$^{−1}$ g$^{−1}$ with excellent photocatalytic stability, which is 87 times than that of NYTiO$_2$-Pt-3.0 (0.24 mmol h$^{−1}$ g$^{−1}$, 1.88 wt% Pt), and also much higher than those of other TiO$_2$ nanostructures with the same Pt content. Such H$_2$ evolution rate is the highest reported for photocatalytic H$_2$ production with such a low Pt content under simulated solar light. Our strategy here suggests that via alkali modifying the photocatalysts, we can not only enhance the H$_2$ production for solar energy conversion but also significantly decrease the noble metal content for cost saving.B. L. Su acknowledges the Chinese Central Government for an “Expert of the State” position in the Program of the “Thousand Talents” and a Life Membership at the Clare Hall, Cambridge and the financial support of the Department of Chemistry, University of Cambridge. Y. Li acknowledges Hubei Provincial Department of Education for the “Chutian Scholar” program. T. H. acknowledges support from the Royal Academy of Engineering through a Research Fellowship and an EPSRC Impact acceleration grant. This work is supported by the National Key Research and Development Program of China (2016YFA0202602), Program for Changjiang Scholars and Innovative Research Team in University (IRT_15R52), International Science & Technology Cooperation Program of China (2015DFE52870), National Natural Science Foundation of China (51302204 and 51502225) and the Fundamental Research Funds for the Central Universities (WUT: 2016 029)

Salicylic acid functionalized silica-coated magnetite nanoparticles for solid phase extraction and preconcentration of some heavy metal ions from various real samples

A method for the preconcentration of trace heavy metal ions in environmental samples has been reported. The presented method is based on the sorption of Cu(II), Cd(II), Ni(II) and Cr(III) ions with salicylic acid as respective chelate on silica-coated magnetite nanoparticles. Prepared adsorbent was characterized by XRD, SEM, BET and FT-IR measurements. The metals content of the sorbed complexes are eluted using 4.0 mL of 1.0 mol L-1 nitric acid. The influences of the analytical parameters including pH, amount of solid phase and condition of eluting solution, the effects of matrix ions on the retention of the analytes were examined. The accuracy and precision of suggested method were tested by analyzing of certified reference materials. The detection limits (3Sb/m, N = 8) for Cu(II), Cd(II), Ni(II) and Cr(III) ions are 0.22, 0.11, 0.27 and 0.15 μg L-1, respectively, and the maximum preconcentration factor is 200. The method was successfully applied to the evaluation of these trace and toxic metals in various waters, foods and other samples

Human papillomavirus infection in women with and without cervical cancer in Karachi, Pakistan

BACKGROUND: No data exist on the population prevalence of, or risk factors for, human papillomavirus (HPV) infection in predominantly Muslim countries in Asia. METHODS: Cervical specimens were obtained from 899 married women aged 15-59 years from the general population of Karachi, Pakistan and from 91 locally diagnosed invasive cervical cancers (ICCs). HPV was detected using a GP5+/6+ PCR-based assay. RESULTS: The prevalence of HPV in the general population was 2.8%, with no evidence of higher HPV prevalence in young women. The positivity of HPV was associated with women's lifetime number of sexual partners, but particularly with the age difference between spouses and other husbands' characteristics, such as extramarital sexual relationships and regular absence from home. The HPV16/18 accounted for 24 and 88% of HPV-positive women in the general population and ICC, respectively. CONCLUSION: Cervical cancer prevention policies should take into account the low HPV prevalence and low acceptability of gynaecological examination in this population

Elevated gamma glutamyl transferase levels are associated with the location of acute pulmonary embolism. Cross-sectional evaluation in hospital setting

ABSTRACT CONTEXT AND OBJECTIVE: The location of embolism is associated with clinical findings and disease severity in cases of acute pulmonary embolism. The level of gamma-glutamyl transferase increases under oxidative stress-related conditions. In this study, we investigated whether gamma-glutamyl transferase levels could predict the location of pulmonary embolism. DESIGN AND SETTING: Hospital-based cross-sectional study at Cumhuriyet University, Sivas, Turkey. METHODS : 120 patients who were diagnosed with acute pulmonary embolism through computed tomography-assisted pulmonary angiography were evaluated. They were divided into two main groups (proximally and distally located), and subsequently into subgroups according to thrombus localization as follows: first group (thrombus in main pulmonary artery; n = 9); second group (thrombus in main pulmonary artery branches; n = 71); third group (thrombus in pulmonary artery segmental branches; n = 34); and fourth group (thrombus in pulmonary artery subsegmental branches; n = 8). RESULTS : Gamma-glutamyl transferase levels on admission, heart rate, oxygen saturation, right ventricular dilatation/hypokinesia, pulmonary artery systolic pressure and cardiopulmonary resuscitation requirement showed prognostic significance in univariate analysis. The multivariate logistic regression model showed that gamma-glutamyl transferase level on admission (odds ratio, OR = 1.044; 95% confidence interval, CI: 1.011-1.079; P = 0.009) and pulmonary artery systolic pressure (OR = 1.063; 95% CI: 1.005-1.124; P = 0.033) remained independently associated with proximally localized thrombus in pulmonary artery. CONCLUSIONS : The findings revealed a significant association between increased existing embolism load in the pulmonary artery and increased serum gamma-glutamyl transferase levels

Creation and annihilation of topological meron pairs in in-plane magnetized films

Merons which are topologically equivalent to one-half of skyrmions can exist only in pairs or groups in two-dimensional (2D) ferromagnetic (FM) systems. The recent discovery of meron lattice in chiral magnet Co8Zn9Mn3 raises the immediate challenging question that whether a single meron pair, which is the most fundamental topological structure in any 2D meron systems, can be created and stabilized in a continuous FM film? Utilizing winding number conservation, we develop a new method to create and stabilize a single pair of merons in a continuous Py film by local vortex imprinting from a Co disk. By observing the created meron pair directly within a magnetic field, we determine its topological structure unambiguously and explore the topological effect in its creation and annihilation processes. Our work opens a pathway towards developing and controlling topological structures in general magnetic systems without the restriction of perpendicular anisotropy and Dzyaloshinskii-Moriya interaction