Non-equilibrium gas flow and heat transfer in a bottom heated square microcavity

This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.The flow of a rarefied gas in a square enclosure with a bottom wall at high temperature and the other three walls at the same low temperature is investigated. The flow configuration is simulated both deterministically, using the non-linear Shakhov kinetic model and stochastically, using the DSMC method. Excellent agreement between the two approaches is obtained. The flow is characterized by the reference Knudsen number and the temperature ratio. It is found that along the side walls the velocity of the gas is not necessarily from cold-to-hot regions due to thermal creep, but from hot-to-cold as well. The effect of the flow parameters to this configuration, including the not well theoretically defined flow from hot-to-cold, is investigated and results are provided in the whole range of the Knudsen number for small, moderate and large temperature differences

Treatments of flows through micro-channels based on the Extended Navier-Stokes-Equations

This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.The paper briefly refers to the present treatments of micro-channel flows that are based on the existing Navier-Stokes-Equations and the employment of wall-slip boundary conditions. The Maxwell slip velocity is employed for this purpose. This theoretical treatment is questioned. It is shown by the authors that the existing Navier-Stokes-Equations are incomplete. They do not contain terms for the self diffusion of mass. Introducing these terms yields the extended Navier-Stokes-Equations that allow micro-channel flows to be treated without the assumption of Maxwellian slip velocities at the wall. A pressure driven slip velocity occurs at the wall and it results as part of the solution for flows in micro-channels by the “Extended Navier-Stokes Equations”. Using these equations, analytical treatments of micro-channel flows are presented. Good agreement with existing experimental results is obtained

Anomalous size dependent rheological behavior of alumina based nanofluids

This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.Rheological behaviour of Alumina (Al2O3) based nanofluids (NFs) has been studied and found to be exhibit unexpected behaviour. Two base-fluids viz, water and ethylene glycols (EG). Three particle sizes (11, 45 and 150 nm), varying over an order of magnitude, were used to analyze the effect of particle size. The experimental data has shown typical Newtonian behavior for both W based and EG based alumina NFs The viscosity of EG based NFs is found to be anomalously reduced compared to the base fluid. This reduction in viscosity may be due to hygroscopic nature of EG or due to the presence of water in as-received high concentration sample also, as told by some researchers. However, this phenomenon was absent for water based NFs. The inter-related effects of particle size, concentration and mode of dispersion (mono or poly-dispersed) were investigated. To eliminate the effect of size variation, mono dispersed NFs are obtained by centrifuging and re-suspension of parent NFs. Particle migration under shear is attributed to the reduction of viscosity. The increase in bulk viscosity with particle size reduction is attributed to the surface forces acting between the particles and the medium in a suspension

Measurement of thermal and electrical conductivities of graphene nanofluids

This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.The current work experimentally investigates the thermal and electrical conductivities of nanofluids containing graphene sheets that have very high thermal conductivity. Here, the graphene is prepared from natural graphite by oxidation-reduction process through a single step method. The graphene nanofluid thus obtained exhibited greater stability even after six months of preparation without addition of any surfactants. The detailed characterization process involving TEM, UV absorption and DLS measurements revealed the well dispersed nature of nanofluid with sheets appropriately interconnected and entangled. The DLS measurement indicates a trimodal size distribution of graphene sheet ranging from 5nm to 1500nm. It was also found that the absorption peak of the sample was 269 nm. This reveals the complete reduction of graphene oxide to graphene and the value is in good agreement with the literature. The thermal conductivity is measured using the traditional Transient Hot Wire (THW) method and enhancements are substantial even at lower concentrations while such behaviour is not predicted by the classical Maxwell theory. The thermal conductivity of graphene nanofluids are measured for different concentrations of 0.01 - 0.2 volume % at different temperatures. It is observed that the thermal conductivity increases with increase in concentration of grapheme, which is as expected. The maximum enhancement obtained is 27% at 0.2% concentration. The enhancement also shows a strong temperature dependence which is unlike that of its carbon predecessors like CNT and graphene oxide nanofluids. Electrical conductivity is measured using a 4 cell conductivity meter with inbuilt automatic temperature compensation. Electrical conductivity enhancement is found to be linear with increase in graphene volume fraction

Fabrication and testing of microfluidic devices for blood cell separation

This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.Blood separation is a strategic preliminary step in preparation to on-chip biological analysis. Two microfluidic devices for on-chip blood separation are presented. Both devices will be integrated to form the separation module of a Lab on Chip for non-invasive prenatal diagnosis. In the first device, a blood plasma separator, the separation of blood cells from plasma is made possible in microchannels by bio-physical effects such as an axial migration effect and Zweifach-Fung bifurcation law. Behaviour of mussel and human blood suspensions were studied alongside the effect of different geometries. The second device aims to separate fetal nucleated red blood cells based on their magnetic susceptibility. Biocompatible materials are used in the manufacturing of both devices.The authors acknowledge the financial support of the Engineering and Physical Science Research Council (EPSRC) through the funding of the Grand Challenge Project ‘3DMintegration’, reference EP/C534212/1. This work has also been supported by the EPSRC through a Doctoral Training Account (DTA) and has been performed at the Microsystems Engineering Centre (MISEC), Heriot-Watt University, Edinburgh. We thank Tim Ryan and Phil Summersgill, Epigem Ltd. for the fabrication of the blood plasma chips. The fabrication work was carried out in the Fluence Microfluidics Application Centre supported by the DTI and the OneNE Regional Development Agency as part of the UK's MNT Network

Spin-Glass Model for Inverse Freezing

We analyze the Blume-Emery-Griffiths model with disordered magnetic interaction displaying the inverse freezing phenomenon. The behaviour of this spin-1 model in crystal field is studied throughout the phase diagram and the transition and spinodal lines for the model are computed using the Full Replica Symmetry Breaking Ansatz that always yelds a thermodynamically stable phase. We compare the results both with the quenched disordered model with Ising spins on lattice gas - where no reentrance takes place - and with the model with generalized spin variables recently introduced by Schupper and Shnerb [Phys. Rev. Lett. 93, 037202 (2004)]. The simplest version of all these models, known as Ghatak-Sherrington model, turns out to hold all the general features characterizing an inverse transition to an amorphous phase, including the right thermodynamic behavior.Comment: 6 pages, 4 figures, to appear in the Proceeding for the X International Workshop on Disordered Systems (2006), Molveno, Ital

Prevention of delirium (POD) for older people in hospital: study protocol for a randomised controlled feasibility trial

Background: Delirium is the most frequent complication among older people following hospitalisation. Delirium may be prevented in about one-third of patients using a multicomponent intervention. However, in the United Kingdom, the National Health Service has no routine delirium prevention care systems. We have developed the Prevention of Delirium Programme, a multicomponent delirium prevention intervention and implementation process. We have successfully carried out a pilot study to test the feasibility and acceptability of implementation of the programme. We are now undertaking preliminary testing of the programme. Methods/Design: The Prevention of Delirium Study is a multicentre, cluster randomised feasibility study designed to explore the potential effectiveness and cost-effectiveness of the Prevention of Delirium Programme. Sixteen elderly care medicine and orthopaedic/trauma wards in eight National Health Service acute hospitals will be randomised to receive the Prevention of Delirium Programme or usual care. Patients will be eligible for the trial if they have been admitted to a participating ward and are aged 65 years or over. The primary objectives of the study are to provide a preliminary estimate of the effectiveness of the Prevention of Delirium Programme as measured by the incidence of new onset delirium, assess the variability of the incidence of new-onset delirium, estimate the intracluster correlation coefficient and likely cluster size, assess barriers to the delivery of the Prevention of Delirium Programme system of care, assess compliance with the Prevention of Delirium Programme system of care, estimate recruitment and follow-up rates, assess the degree of contamination due to between-ward staff movements, and investigate differences in financial costs and benefits between the Prevention of Delirium Programme system of care and standard practice. Secondary objectives are to investigate differences in the number, severity and length of delirium episodes (including persistent delirium); length of stay in hospital; inhospital mortality; destination at discharge; health-related quality of life and health resource use; physical and social independence; anxiety and depression; and patient experience. Discussion: This feasibility study will be used to gather data to inform the design of a future definitive randomised controlled trial. Trial registration: ISRCTN01187372. Registered 13 March 2014

Learning by hiring: the effects of scientists’ inbound mobility on research performance in academia

This study investigates the effects of scientists’ inbound mobility on the research performance of incumbent scientists in an academic setting. The theoretical framework integrates insights from learning theory and social comparison theory to suggest two main mechanisms behind these effects, localized learning and social comparison. The authors propose several hypotheses about the conditions that might intensify or weaken such effects. Specifically, the arrival of new scientific personnel is likely to exert stronger positive effects on the performance of incumbent scientists with shorter (cf. longer) organizational tenure; in addition, academic departments with less diversified expertise and with higher levels of internal collaborations likely reap greater benefits from learning by hiring. The empirical findings, based on a longitudinal analysis of a sample of 94 U.S. academic chemical engineering departments, provide empirical support for these contentions