Efficient Video Indexing on the Web: A System that Leverages User Interactions with a Video Player

In this paper, we propose a user-based video indexing method, that automatically generates thumbnails of the most important scenes of an online video stream, by analyzing users' interactions with a web video player. As a test bench to verify our idea we have extended the YouTube video player into the VideoSkip system. In addition, VideoSkip uses a web-database (Google Application Engine) to keep a record of some important parameters, such as the timing of basic user actions (play, pause, skip). Moreover, we implemented an algorithm that selects representative thumbnails. Finally, we populated the system with data from an experiment with nine users. We found that the VideoSkip system indexes video content by leveraging implicit users interactions, such as pause and thirty seconds skip. Our early findings point toward improvements of the web video player and its thumbnail generation technique. The VideSkip system could compliment content-based algorithms, in order to achieve efficient video-indexing in difficult videos, such as lectures or sports.Comment: 9 pages, 3 figures, UCMedia 2010: 2nd International ICST Conference on User Centric Medi

Ground Vibrations Induced by High-Speed Trains in Regions with Sudden Foundation Stiffness Change

In this paper analytical transient solutions of dynamic response of one-dimensional systems with sudden change of foundation stiffness are derived. In more details, cantilever dynamic response, expressed in terms of vertical displacement, is extended to account for elastic foundation and then two cantilever solutions, corresponding to beams clamped on left and right hand side, with different value of Winkler constant are connected together by continuity conditions. The internal forces, as the unknowns, can be introduced by the same values in both clamped beam solutions and solved. Assumption about time variation of internal forces at the section of discontinuity must be adopted and originally analytical solution will have to include numerical procedure

Novel pharmacological actions of Trequinsin Hydrochloride improve human sperm cell motility and function

Background and purposeAsthenozoospermia is a leading cause of male infertility, but the development of pharmaceuticals to improve sperm motility has been hindered by the lack of effective screening platforms and knowledge of suitable molecular targets. We have demonstrated that a high throughput screening (HTS) strategy in conjunction with established in vitro tests can identify and characterise the action of compounds that improve sperm motility. The study aimed to apply HTS to identify new compounds from a novel small molecule library that increase intracellular calcium, [Ca2+]I, promote human sperm cell motility and systemically determine the mechanism of action. Experimental approach A validated HTS fluorometric [Ca2+]i assay was used to screen an in-house library of compounds. Trequinsin hydrochloride (a phosphodiesterase 3 inhibitor) was selected for detailed molecular (plate reader assays, electrophysiology and cyclic nucleotide measurement) and functional (motility and acrosome reaction) testing in sperm from healthy volunteer donors and, where possible, patients.   Key resultsThe fluorometric analysis identified Trequinsin as an efficacious agonist of [Ca2+]i, although less potent than progesterone (P4). Functionally, Trequinsin significantly increased cell hyperactivation and penetration into viscous medium in all donor sperm samples and cell hyperactivation in 22/25 (88%) patient sperm samples. The Trequinsin-induced [Ca2+]i response was cross-desensitised consistently by prostaglandin E1 but not with P4. Whole-cell patch clamp electrophysiology confirmed that Trequinsin activates CatSper and partially inhibits potassium channel activity. Trequinsin also increases intracellular cGMP.   Conclusion and Implications Trequinsin exhibits a novel pharmacological profile in human sperm and may be a suitable lead compound for the development of new pharmaceuticals to improve patient sperm function and fertilisation potential

Perforated peptic ulcer: main factors of morbidity and mortality.

World J Surg. 2003 Jul;27(7):782-7. Perforated peptic ulcer: main factors of morbidity and mortality. Noguiera C, Silva AS, Santos JN, Silva AG, Ferreira J, Matos E, Vilaça H. Surgery Department, Surgery 1, Hospital Geral de Santo António, Instituto de Ciencias Biomédicas Abel Salazar, Largo do Prof. Abel Salazar, 4099-001 Oporto, Portugal. Abstract It is well stated in the literature that medical treatment for peptic ulcer is based on a combination of proton pump inhibitors (PPIs) and antibiotics to eradicate Helicobacter pylori. This treatment is associated with a high rate of immediate success and a low rate of recurrence at 12 months, although it is not effective in all patients. Peptic ulcer (PU) perforation is a serious problem that leads to high complication and mortality rates. Surgical treatment, with its various possibilities, constitutes the ideal treatment. Surgical intervention in these cases, however, can be directed to treating the perforation alone, or it can offer definitive treatment of the ulcer itself. With the hope of establishing why such complications and mortality were seen in the patients in our hospital population, we gathered the facts about PU perforations and the types of surgery performed. We studied 210 consecutive patients (150 men, 60 women) who had undergone surgery at our hospital because of perforation between January 1, 1990 and December 31, 2000. The patients' median age was 53.0 +/- 20.6 years (men 47.7 +/- 17.3 years; women 66.3 +/- 22.0 years). Altogether, 86 patients had significant associated illnesses, 62 were admitted more than 24 hours after the perforation, and 25 were admitted in shock. We performed resections in 10 patients; 88 patients were treated by suturing the perforation with or without a patch of epiploon; and 112 underwent a troncular vagotomy with drainage (VT + Dr). A total of 21 patients died (10%). Significant risk factors that led to complications were identified by statistical studies. They were a perforation that had been present more than 24 hours, the coexistence of significant associated illnesses, and resection surgery. The significant risk factors that led to death were the presence of shock at admission, the coexistence of significant illnesses, and resection surgery. There was no statistically significant difference concerning morbidity and mortality between simple closure of the perforation and definitive surgery (VT + Dr). PMID: 14509505 [PubMed - indexed for MEDLINE

Early gastric cancer: ten years of experience

World J Surg. 2002 Mar;26(3):330-4. Epub 2001 Dec 21. Early gastric cancer: ten years of experience. Nogueira C, Silva AS, Santos JN, Silva AG, Ferreira J, Matos E, Vilaça H. Surgery Department, Surgery 1, Hospital Geral de Santo António, Largo Prof. Abel Salazar, 4000 Oporto, Portugal. [email protected] Abstract Gastric cancer is a disease in which the main treatment is surgical extirpation. The modifications introduced in the surgical treatment over the last decades were accompanied by a clear increase of survival, which reaches global values of 61% at 5 years in Japan. One of the reasons that contribute to this improvement is early diagnosis of the lesions. In the period between January 1, 1990 and December 31, 1999 662 patients with gastric adenocarcinoma were treated in the Service of Surgery 1 of our hospital; 110 were refused surgical treatment. Of the resected patients, 91 (21.4%) were classified as early gastric cancer according to the definition of the Japanese Society of Digestive Endoscopy. There were 30 women and 61 men, with a median age of 60.2 +/- 15 years; 3 patients had a preoperative diagnosis of gastric ulcer; 2 others were operated without recent histology; and 1 patient was urgently resected for a bleeding ulcer. In all the remaining patients biopsy confirmed the presence of cancer (89%) or serious dysplasia (4.6%). The lesions had been distributed essentially in the medium 1/3 (48.3%) and distal 1/3 of the stomach. Subtotal gastrectomy was accomplished in 48 patients, total gastrectomy in 40, total desgastrogastrectomy in 3, and in 9 patients the surgery involved the spleen (8 patients) and the spleen and tail of the pancreas in 1 patient. Lymphadenectomy was not performed in 5 patients, lymph nodes by the first lymph node barrier were removed in 25 patients and by the second barrier in 61 patients (67%). Median tumor size was 26 +/- 1.8 mm. The lesion reached the mucosa in 46 patients and the mucosa and submucosa in 45. In 6 patients the removed lymph nodes were microscopically invaded (6.7%). Five patients died (5.7%). The median follow-up of the patients is 41 +/- 26 months; 7 patients died (8.1%) during this period; 4 died unequivocally of disease progression. The median survival of patients was 85% at 5 years and 80% at 10 years. In our series, survival was affected by the presence of invaded lymph nodes, not by the penetration in depth of the lesion or the size of the tumor. PMID: 11865370 [PubMed - indexed for MEDLINE

Designing a Novel System for the Introduction of Lubricant in Control Cables for the Automotive Industry

The increasing competitiveness installed in the automotive industry implies continuous improvements in all fields of knowledge and action. Thus, it is very important to be aware of the wastes generate across all the productive and logistics operations. In this regard, and considering the production process of command cables for the automotive industry, it was detected that a significant volume of lubricant is wasted during the task of introducing grease into the spiral used in the command cables utilized to drive the doors, windows and brakes of motor vehicles. The industrial operation was carefully followed leading to identify the main causes of the wastes and a brainstorming was carried out allowing the discussion of new ideas on how to overcome the problem. A novel equipment was developed, being also cared all the logistics around the supplying task. The new solution developed, as well as the redefinition of the logistic process of supplying the lubricating grease to the production lines, made it possible to make the process more flexible for the admission of different grease packs, as well as a better utilization of the existing grease in the reservoirs, resulting in a cut of grease waste by more than 70%. It was also produced a prototype of the grease supply system, which allowed validate the previously developed system.info:eu-repo/semantics/publishedVersio

Improvement and validation of Zamak die casting moulds

The automotive industry, like many other industries, uses a wide range of parts produced by the die-cast process. Parts like engine blocks, wheel spacers, alternator housings and command cable terminals, are made by die casting with different kinds of materials like aluminium and zinc alloys. Despite being a reliable process both in terms of quantity and quality, it is very important to keep the process parameters controlled, in order to achieve a minimum percentage of defective parts, which may be caused by several factors such as, porosities, segregations, incomplete fill, soldering, cracks, etc. The main goal of the die casting industry is to achieve the zero per cent defects target, a goal that goes along with the automotive industry and its quality system, and to accomplish this objective the stakeholders need to invest in research and development. In the casting industry, for instance, it is very important to have a complete knowledge of the entire process developed inside the casting machine, from the melting pot to the die, in order to obtain data so one can improve the filling parameters, machine parts, and moulds. The focus of the presented study is the improvement of the methodologies used to design moulds for control cable terminals in Zamak alloys. The work starts by characterizing the flow happening inside the mould at the moment of cavity fill by analysing computer fluid dynamics simulations (CFD). The study proceeds by quantifying the porosities detected on cut terminal surfaces, and the ultimate goal is achieved with the modification of molten metal flow systems, like channels and sprues, and the introduction of venting systems, with a resource to mathematical and geometrical calculus developed in MATLAB® specifically for that purpose. The paper ends with the validation of the improvements, by comparing the initial results with the ones obtained through an improved mould, building bases for novel design concepts of moulds for this kind of parts, as well as new studies trying to improve the results now achieved.info:eu-repo/semantics/publishedVersio

Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study

Purpose: The purpose of this article is to explore the optimization of internal process is assumed as a critical factor to be capable of answering to the moulds industries. Consequently, it has been considered essential to adopt high-valued methodologies to support tooling industry in order to achieve global competitive advantages. For that purpose, this work aims to apply LEAN principles and techniques to support mould design and manufacturing processes. Methodology/Approach: The methodology used was based on PDCA/DMAIC, with the following stages: Define, Measure, Analyze, Improve and Control. For each stages was taken some of Lean Six Sigma techniques, such as Continuous Improvement, Value Stream Mapping, Pareto analysis and Overall Equipment Effectiveness. Findings: This study results was revealed that there are many areas on the organizations in the Mould Industry, when they utilize otimizations tools obtain hugt successes. With the Pareto analysis was carried out to show that events that contributes the most to the stops. The results were: unavailability of the operator (16.4%), programming the machine (14.4%) and tool exchange (12.4%) In the case of this Mould Industry study was obtained for the CNC machines studies, with the implementation of Lean Six Sigma tools as obtained a improvement about 20% of global OEE. Research Limitation/implication: This research was revealed that there the moulds are Project unique and difficult to analyze. Moreover, this paper reports that the approach LEAN Six Sigma is very interesting for the continuous improvement of processes and profitability of moulds industry. Originality/Value of paper: This research highlight areas of future research using of quality management methods and Lean Six Sigma tools to analyse and optimize production in the moulds industry. Therefore this research It is considered to promote and adopt high-valued methodologies to support tooling industry in order to achieve global competitive advantages.info:eu-repo/semantics/publishedVersio

SENSITIVITY ANALYSIS OF TRACK VIBRATIONS DUE TO VERTICAL STIFFNESS VARIATION IN HIGH-SPEED RAILWAYS

High speed trains, when crossing regions with abrupt changes in vertical stiffness of the track and/or subsoil, may generate excessive ground and track vibrations. There is an urgent need for specific analyses of this problem so as to allow reliable esimates of vibration amplitude. Full understanding of these phenomena will lead to new construction solutions and mitigation of undesirable features. In this paper analytical transient solutions of dynamic response of one-dimensional systems with sudden change of foundation stiffness are derived. Results are expressed in terms of vertical displacement. Sensitivity analysis of the response amplitude is also performed. The analytical expressions presented herein, to the authors’ knowledge, have not been published yet. Although related to one-dimensional cases, they can give useful insight into the problem. Nevertheless, in order to obtain realistic response, vehicle- rail interaction cannot be omitted. Results and conclusions are confirmed using general purpose commercial software ANSYS. In conclusion, this work contributes to a better understanding of the additional vibration phenomenon due to vertical stiffness variation, permitting better control of the train velocity and optimization of the track design

The Best You: Gym Based Machine Learning Application

Use of artificial intelligence (AI) and machine learning is rapidly becoming more widespread in the 21st century. Both are quickly emerging increasingly vital aspects of today's standard exercise routines. Artificial intelligence has become inextricably linked to health and fitness. Experts in the field of technology believe that AI will solve all problems. When it comes to fitness, it has the ability to empower the app by drastically increasing engagement, which may lead to long-term income. In other words, it has the potential to make money. Apps that are equipped with AI have the potential to provide consumers a wide range of benefits. It is feasible for a person who is interested in fitness to save money because an artificial intelligence fitness trainer is more cost-effective than a human trainer. On the other hand, joining a gym may be cost prohibitive or just not doable given our hectic schedules. Aside from that, using fitness software that is powered by AI might make working out more fascinating and fun. In this section, we will discuss some of the best fitness applications that are powered by AI and machine learning models. This app creates unique training plans for each user using artificial intelligence This app was originally designed exclusively for use in gyms, but it recently changed its focus to meet the rising demand for at-home exercise. Simply put, FitnessAI pushes users to effectively build muscle every time they exercise by optimizing their weight lifting sets, repetitions, and weights for each activity. The main purpose of proposing this application system is to provide gym-goers with the right information at the right time, preventing them from taking the wrong supplements to maintain their body well