405 research outputs found
Growth stages of torch ginger (Etlingera elatior) plant
Torch ginger (Etlingera elatior) is a herbaceous clumping plant. It is a multifunctional crop that has been used for culinary, medicinal, antibacterial agent, ornamental and floral arrangement purpose. However, from the literature, no work has been carried out to study its growth and development morphological characteristics. It is important to understand the developmental morphology of the torch ginger plant for research purpose, commercial usage and apply proper production practices by growers for higher yields and profits. Therefore, the aim of this study was to determine the time course of morphological changes during the growth and development of torch ginger. Results showed that it took 155 days from leafy shoot emerging from rhizome until senescence of inflorescence. The growth and development of torch ginger plant were divided into vegetative and reproductive phases. The vegetative phase mainly involved the growth activities of leafy shoot. The transition of vegetative to reproductive phase happened when the inflorescence shoot emerged from the rhizome. In the reproductive phase, the growth and development of the inflorescence were categorized into four phenological stages which were peduncle elongation, inflorescence emergence, flowering and senescence. The growth pattern of the leafy shoot and inflorescence demonstrated a monocarpic plant growth habit with the remobilization of photoassimilates from senescing plant parts to developing true flowers that caused whole-plant senescence. Further research is needed to study the mechanisms that regulate flowering and senescence in torch ginger plant
Apparent negative motion of vortex matter due to inhomogeneous pinning
We investigate the transport of vortices in superconductors with inhomgeneous pinning under a driving force. The inhomogeneity of pinning is simplified as strong-weak pinning regions. It is demonstrated that the interactions between the vortices captured by strong pinning potentials and the vortices in the weak pinning region cause absolute negative motion (ANM) of vortices: The vortices which are climbing toward the high barriers induced by the strong pinning with the help of driving force move toward the opposite direction of the force and back to their equilibrium positions in the weak pinning region as the force decreases or is withdrawn. Our simulations reveal that the hysteresis of ANM is determined by the competition between the speed of the negative motion which depends on the piining inhomogeneity in superconductors and the speed of the driving force. Under the conditions of either larger force scanning rate or higher pinning inhomogeneity, a marked ANM and a larger hysteretic speed-force loop could be observed. This indicates that the time window to observe the ANM should be chosen properly. Moreover, the V-1 characteristics of Ag-sheathed Bi=2223 tapes are measured, and experimental observations are qualitatively in agreement with the simulation
Metastable behavior of vortex matter in the electronic transport processes of homogenous superconductors
We study numerically the effect of vortex pinning on the hysteresis voltage-temperature (V-T) loop of vortex matter. It is found that different types of the V-T loops result from different densities of vortex pinning center. An anticlockwise V-T loop is observed for the vortex system with dense pinning centers, whereas a clockwise V-T loop is brought about for vortices with dilute pinning centers. It is shown that the size of the V-T loop becomes smaller for lower experimental speed, higher magnetic field, or weak pinning strength. Our numerical observation is in good agreement with experiments
Effect of Na doping on flux pinning of YBa1.9Na0.1Cu3O7-d
We have prepared Na-doped YBa2Cu3Oy (YBa1.9Na0.1Cu3Oy +40mol%Y211) (YBNCO)
and Na-free YBa2Cu3Oy (YBCO) samples by the Melt-Textured Growth (MTG) method
to study the effect of doped Na ion on flux pinning. The ac susceptibility
curves (acs) as well as the hysteresis loops were measured for the samples.
Then the effective pinning energy (U(T,Hdc,J)), irreversibility line (Hirr(T))
and critical current density (jc(Hdc)) were determined, where T, Hdc and J are
temperature, dc magnetic field and current density, respectively. We found
that, with Na doping, the Hirr(T) line shifted to lower temperature while the
Jc(Hdc) and U(T,Hdc,J) became smaller. It indicates that the Na ions play a
negative role in the flux pinning of YBCO. The appearance of the second peak in
the Jc(Hdc) curves and the enhancement of anisotropy in YBNCO further support
this finding.Comment: 7 pages, 7figures. Submited to Physica.
History effect in inhomogeneous superconductors
A model was proposed to account for a new kind of history effect in the
transport measurement of a sample with inhomogeneous flux pinning coupled with
flux creep. The inhomogeneity of flux pinning was described in terms of
alternating weak pinning (lower jc) and strong pinning region (higher jc). The
flux creep was characterized by logarithmic barrier. Based on this model, we
numerically observed the same clockwise V-I loops as reported in references.
Moreover, we predicted behaviors of the V-I loop at different sweeping rates of
applied current dI/dt or magnetic fields Ba, etc. Electric transport
measurement was performed in Ag-sheathed Bi2-xPbxSr2Ca2Cu3Oy tapes immersed in
liquid nitrogen with and without magnetic fields. V-I loop at certain dI/dt and
Ba was observed. It is found that the area of the loop is more sensitive to
dI/dt than to Ba, which is in agreement well with our numerical results.Comment: To appear in Phys Rev B, October 1 Issu
Nonequilibrium dynamics in type-II superconductors with inhomogeneous vortex pinning
We study numerically the dynamics relating to negative vortex motion in inhomogeneous pinning systems. We show that this dynamical phenomenon results from the internal field effect produced by the growing local barriers with decreasing temperature. We find that the negative motion is characterized
by a peak of negative voltage or resistance in resistance–temperature transport measurements. We also demonstrate that the time window to observe the negative motion is determined by the magnitude of driving force in addition to the temperature scanning rat
Measuring the flow properties of small powder samples using an avalanche tester
The feasibility of using a small-scale avalanche tester to measure the flow properties of pharmaceutical lactose powders was examined. The modes of behaviour observed in larger systems were displayed and showed a clear distinction between angular, free-flowing particles and more spherical particles of similar flow characteristics. Angular Lactohale LH100 particles showed slumping behaviour at a rotational frequency of 0.33Hz which disappeared at higher frequencies. Spherical lactose powder with a similar flow function to LH100 only showed rolling behaviour under the same conditions, as did more cohesive powders LH200 and LH300. Further investigation of the LH100 data using Fast Fourier analysis showed that the slumping frequency was 1/10th of the rotational frequency
Synthesis, characterisation and corrosion behaviour of simulant Chernobyl nuclear meltdown materials
Understanding the physical and chemical properties of materials arising from nuclear meltdowns, such as the Chernobyl and Fukushima accidents, is critical to supporting decommissioning operations and reducing the hazard to personnel and the environment surrounding the stricken reactors. Relatively few samples of meltdown materials are available for study, and their analysis is made challenging due to the radiation hazard associated with handling them. In this study, small-scale batches of low radioactivity (i.e., containing depleted uranium only) simulants for Chernobyl lava-like fuel-containing materials (LFCMs) have been prepared, and were found to closely approximate the microstructure and mineralogy of real LFCM. The addition of excess of ZrO2 to the composition resulted in the first successful synthesis of high uranium–zircon (chernobylite) by crystallisation from a glass melt. Use of these simulant materials allowed further analysis of the thermal characteristics of LFCM and the corrosion kinetics, giving results that are in good agreement with the limited available literature on real samples. It should, therefore, be possible to use these new simulant materials to support decommissioning operations of nuclear reactors post-accident
Leaf shape influences the scaling of leaf dry mass vs. area: a test case using bamboos
Key message A highly significant and positive scaling relationship between bamboo leaf dry mass and leaf surface area was observed; leaf shape (here, represented by the quotient of leaf width and length) had a significant influence on the scaling exponent of leaf dry mass vs. area. Context The scaling of leaf dry mass vs. leaf area is important for understanding how plants effectively intercept sunlight and invest carbon to do so. However, comparatively few, if any, studies have focused on whether leaf shape influences this scaling relationship. Aims In order to explore the effects of leaf shape on the scaling relationship between leaf dry mass and area, we examined 101 species, varieties, forms, and cultivars of bamboo growing in China and identified the relationship between the scaling exponent of leaf dry mass vs. area and leaf shape. This taxon was used because its leaf shape is conserved across species and, therefore, easily quantified. Methods Ten thousand and forty-five leaves from 101 bamboo species, varieties, forms, and cultivars growing in China were collected, and leaf dry mass, the quotient of leaf width and length, leaf area, and leaf dry mass per unit area were measured. The effect of leaf shape that can be easily quantified using the quotient of leaf width and length on the relevant and ecologically important scaling exponents was explored using this data base. Results Leaf dry mass and area differed significantly across bamboo genera, and even within the same genus. However, a statistically robust log-log linear and positive scaling relationship was observed for mass and area with a 1.115 scaling exponent (95% CI = 1.107, 1.122; r(2) = 0.907). Leaf shape had a significant influence on the numerical values of the scaling exponent of leaf dry mass vs. area. When the median of the quotient of leaf width and length was below 0.125, the numerical value of the scaling exponent increased with increasing quotient of leaf width and length. When the median of the quotient of leaf width and length was above 0.125, the scaling exponent numerically decreased toward 1.0. Conclusion We show, for the first time, that a significant relationship exists between leaf shape and the numerical values of scaling exponents governing the scaling of leaf dry mass with respect to leaf area. In addition, we show that with the quotient of leaf width and length increasing mean LMA increases, which implies a negative correlation between mean LMA and the estimated exponent of leaf dry mass vs. area for the grouped data based on the sorted quotients of leaf width and length
EGAM Induced by Energetic-electrons and Nonlinear Interactions among EGAM, BAEs and Tearing Modes in a Toroidal Plasma
In this letter, it is reported that the first experimental results are
associated with the GAM induced by energetic electrons (eEGAM) in HL-2A Ohmic
plasma. The energetic-electrons are generated by parallel electric fields
during magnetic reconnection associated with tearing mode (TM). The eEGAM
localizes in the core plasma, i.e. in the vicinity of q=2 surface, and is very
different from one excited by the drift-wave turbulence in the edge plasma. The
analysis indicated that the eEGAM is provided with the magnetic components,
whose intensities depend on the poloidal angles, and its mode numbers are
jm/nj=2/0. Further, there exist intense nonlinear interactions among eEGAM,
BAEs and strong tearing modes (TMs). These new findings shed light on the
underlying physics mechanism for the excitation of the low frequency (LF)
Alfv\'enic and acoustic uctuations.Comment: 5 pages,4 figure
- …