Physiological effects of pre-sowing seed treatment with gibberellic acid on Nigella sativa L

Apre-sowing treatment was applied to black cumin (Nigella sativa L.) seeds, which were surface-sterilized and soaked for 5, 10 or 15 h in 10–6, 10–5, or 10–4Maqueous solution of gibberellic acid (GA). The potted plants were then analysed at 50, 70 and 90 days after sowing for leaf chlorophyll (Chl) content, stomatal conductance (gs), carbonic anhydrase (CA) activity, nitrate reductase (NR) activity, total protein content, net photosynthetic rate (PN), capsule number and seed yield at harvest (130 days after sowing). All these parameters were found to be appreciably enhanced by the hormone treatment. The most prominent results were obtained with 10–5M GA following a pre-sowing treatment for 10 h, in which case the values for PN, CAand NR activity, and seed yield were elevated by 44, 40, 30 and 40% respectively over the control at the 70 day stage

Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings

In the present study, HFCVD nanocrystalline, microcrystalline and boron-doped nanocrystalline diamond coatings have been deposited on titanium alloy. The effect of boron doping on coefficient of friction and residual stresses of diamond coatings have been studied.Досліджено нанокристалічні, мікрокристалічні і леговані бором нанокристалічні алмазні покриття, нанесені на титановий сплав. Вивчено вплив легування бором на коефіцієнт тертя і залишкові напруги алмазних покриттів.Исследованы нанокристаллические, микрокристаллические и легированные бором нанокристаллические алмазные покрытия, нанесенные на титановый сплав. Изучено влияние легирования бором на коэффициент трения и остаточные напряжения алмазных покрытий

Influence of uniaxial tensile stress on the mechanical and piezoelectric properties of short-period ferroelectric superlattice

Tetragonal ferroelectric/ferroelectric BaTiO3/PbTiO3 superlattice under uniaxial tensile stress along the c axis is investigated from first principles. We show that the calculated ideal tensile strength is 6.85 GPa and that the superlattice under the loading of uniaxial tensile stress becomes soft along the nonpolar axes. We also find that the appropriately applied uniaxial tensile stress can significantly enhance the piezoelectricity for the superlattice, with piezoelectric coefficient d33 increasing from the ground state value by a factor of about 8, reaching 678.42 pC/N. The underlying mechanism for the enhancement of piezoelectricity is discussed

Epigenome editing of the CFTR-locus for treatment of cystic fibrosis

Background: Mechanisms governing the diversity of CFTR gene expression throughout the body are complex. Multiple intronic and distal regulatory elements are responsible for regulating differential CFTR expression across tissues. Methods: Drawing on published data, 18 high-priority genomic regions were identified and interrogated for CFTR-enhancer function using CRISPR/dCas9-based epigenome editing tools. Each region was evaluated by dCas9p300 and dCas9KRAB for its ability to enhance or repress CFTR expression, respectively. Results: Multiple genomic regions were tested for enhancer activity using CRISPR/dCas9 epigenome editing. dCas9p300 mediates a significant increase in CFTR mRNA levels when targeted to the promoter and a region 44 kb upstream of the transcriptional start site in a CFTR-low expressing cell line. Multiple gRNAs targeting the promoter induced a robust increase in CFTR protein levels. In contrast, dCas9KRAB-mediated repression is much more robust with 10 of the 18 evaluated genomic regions inducing CFTR protein knockdown. To evaluate the therapeutic efficacy of modulating CFTR gene regulation, dCas9p300 was used to induce elevated levels of CFTR from the endogenous locus in ΔF508/ΔF508 human bronchial epithelial cells. Ussing chamber studies demonstrated a synergistic increase in ion transport in response to CRISPR-induced expression of ΔF508 CFTR mRNA along with VX809 treatment. Conclusions: CRISPR/dCas9-based epigenome-editing provides a previously unexplored tool for interrogating CFTR enhancer function. Here, we demonstrate that therapeutic interventions that increase the expression of CFTR may improve the efficacy of CFTR modulators. A better understanding CFTR regulatory mechanisms could uncover novel therapeutic interventions for the development of cystic fibrosis therapies

FGF receptor genes and breast cancer susceptibility: results from the Breast Cancer Association Consortium

Background:Breast cancer is one of the most common malignancies in women. Genome-wide association studies have identified FGFR2 as a breast cancer susceptibility gene. Common variation in other fibroblast growth factor (FGF) receptors might also modify risk. We tested this hypothesis by studying genotyped single-nucleotide polymorphisms (SNPs) and imputed SNPs in FGFR1, FGFR3, FGFR4 and FGFRL1 in the Breast Cancer Association Consortium. Methods:Data were combined from 49 studies, including 53 835 cases and 50 156 controls, of which 89 050 (46 450 cases and 42 600 controls) were of European ancestry, 12 893 (6269 cases and 6624 controls) of Asian and 2048 (1116 cases and 932 controls) of African ancestry. Associations with risk of breast cancer, overall and by disease sub-type, were assessed using unconditional logistic regression. Results:Little evidence of association with breast cancer risk was observed for SNPs in the FGF receptor genes. The strongest evidence in European women was for rs743682 in FGFR3; the estimated per-allele odds ratio was 1.05 (95 confidence interval=1.02-1.09, P=0.0020), which is substantially lower than that observed for SNPs in FGFR2. Conclusion:Our results suggest that common variants in the other FGF receptors are not associated with risk of breast cancer to the degree observed for FGFR2. © 2014 Cancer Research UK

Assessing the transferability and reproducibility of 3D in vitro liver models from primary human multi-cellular microtissues to cell-line based HepG2 spheroids

To reduce, replace, and refine in vivo testing, there is increasing emphasis on the development of more physiologically relevant in vitro test systems to improve the reliability of non-animal-based methods for hazard assessment. When developing new approach methodologies, it is important to standardize the protocols and demonstrate the methods can be reproduced by multiple laboratories. The aim of this study was to assess the transferability and reproducibility of two advanced in vitro liver models, the Primary Human multicellular microtissue liver model (PHH) and the 3D HepG2 Spheroid Model, for nanomaterial (NM) and chemical hazard assessment purposes. The PHH model inter-laboratory trial showed strong consistency across the testing sites. All laboratories evaluated cytokine release and cytotoxicity following exposure to titanium dioxide (TiO2) and zinc oxide (ZnO) nanoparticles. No significant difference was observed in cytotoxicity or IL-8 release for the test materials. The data were reproducible with all three laboratories with control readouts within a similar range. The PHH model ZnO induced the greatest cytotoxicity response at 50.0 μg/mL and a dose-dependent increase in IL-8 release. For the 3D HepG2 spheroid model, all test sites were able to construct the model and demonstrated good concordance in IL-8 cytokine release and genotoxicity data. This trial demonstrates the successful transfer of new approach methodologies across multiple laboratories, with good reproducibility for several hazard endpoints.Toxicolog

Observation of hard scattering in photoproduction events with a large rapidity gap at HERA

Events with a large rapidity gap and total transverse energy greater than 5 GeV have been observed in quasi-real photoproduction at HERA with the ZEUS detector. The distribution of these events as a function of the $\gamma p$ centre of mass energy is consistent with diffractive scattering. For total transverse energies above 12 GeV, the hadronic final states show predominantly a two-jet structure with each jet having a transverse energy greater than 4 GeV. For the two-jet events, little energy flow is found outside the jets. This observation is consistent with the hard scattering of a quasi-real photon with a colourless object in the proton.Comment: 19 pages, latex, 4 figures appended as uuencoded fil

D* Production in Deep Inelastic Scattering at HERA

This paper presents measurements of D^{*\pm} production in deep inelastic scattering from collisions between 27.5 GeV positrons and 820 GeV protons. The data have been taken with the ZEUS detector at HERA. The decay channel $D^{*+}\to (D^0 \to K^- \pi^+) \pi^+$ (+ c.c.) has been used in the study. The $e^+p$ cross section for inclusive D^{*\pm} production with $5<Q^2<100 GeV^2$ and $y<0.7$ is 5.3 \pms 1.0 \pms 0.8 nb in the kinematic region {$1.3<p_T(D^{*\pm})<9.0$ GeV and $| \eta(D^{*\pm}) |<1.5$}. Differential cross sections as functions of p_T(D^{*\pm}), $\eta(D^{*\pm}), W$ and $Q^2$ are compared with next-to-leading order QCD calculations based on the photon-gluon fusion production mechanism. After an extrapolation of the cross section to the full kinematic region in p_T(D^{*\pm}) and $\eta$(D^{*\pm}), the charm contribution $F_2^{c\bar{c}}(x,Q^2)$ to the proton structure function is determined for Bjorken $x$ between 2 $\cdot$ 10$^{-4}$ and 5 $\cdot$ 10$^{-3}$.Comment: 17 pages including 4 figure

Climate Change and COP26: Are Digital Technologies and Information Management Part of the Problem or the Solution? An Editorial Reflection and Call to Action

The UN COP26 2021 conference on climate change offers the chance for world leaders to take action and make urgent and meaningful commitments to reducing emissions and limit global temperatures to 1.5 °C above pre-industrial levels by 2050. Whilst the political aspects and subsequent ramifications of these fundamental and critical decisions cannot be underestimated, there exists a technical perspective where digital and IS technology has a role to play in the monitoring of potential solutions, but also an integral element of climate change solutions. We explore these aspects in this editorial article, offering a comprehensive opinion based insight to a multitude of diverse viewpoints that look at the many challenges through a technology lens. It is widely recognized that technology in all its forms, is an important and integral element of the solution, but industry and wider society also view technology as being part of the problem. Increasingly, researchers are referencing the importance of responsible digitalization to eliminate the significant levels of e-waste. The reality is that technology is an integral component of the global efforts to get to net zero, however, its adoption requires pragmatic tradeoffs as we transition from current behaviors to a more climate friendly society