8,348 research outputs found
Computational simulation for concurrent engineering of aerospace propulsion systems
Results are summarized for an investigation to assess the infrastructure available and the technology readiness in order to develop computational simulation methods/software for concurrent engineering. These results demonstrate that development of computational simulation methods for concurrent engineering is timely. Extensive infrastructure, in terms of multi-discipline simulation, component-specific simulation, system simulators, fabrication process simulation, and simulation of uncertainties--fundamental to develop such methods, is available. An approach is recommended which can be used to develop computational simulation methods for concurrent engineering of propulsion systems and systems in general. Benefits and issues needing early attention in the development are outlined
Biosinteza, fermentacija, purifikacija i primjena surfaktina
Surfactin, a bacterial cyclic lipopeptide, is produced by various strains of Bacillus subtilis and is primarily recognized as one of the most effective biosurfactants. It has the ability to reduce surface tension of water from 72 to 27 mN/m at a concentration as low as 0.005 %. The structure of surfactin consists of seven amino acids bonded to the carboxyl and hydroxyl groups of a 14-carbon fatty acid. Surfactin possesses a number of biological activities such as the ability to lyse erythrocytes, inhibit clot formation, lyse bacterial spheroplasts and protoplasts, and inhibit cyclic 3\u27,5-monophosphate diesterase. The high cost of production and low yields have limited its use in various commercial applications. Both submerged and solid-state fermentation have been investigated with the mutational approach to improve the productivity. In this review, current state of knowledge on biosynthesis of surfactin, its fermentative production, purification, analytical methods and biomedical applications is presented.Surfaktin, ciklički lipopeptid izoliran iz različitih sojeva bakterije Bacillus subtilis, jedan je od najučinkovitijih biosurfaktanata, koji čak i u koncentraciji od 0,005 % smanjuje površinsku napetost vode sa 72 na 27 mN/m. Sastoji se od 7 aminokiselina vezanih karboksilnim i hidroksilnim skupinama na masnu kiselinu sa 14 ugljikovih atoma. Biološka je aktivnost surfaktina raznovrsna: razgrađuje eritrocite, sprečava zgrušavanje, razgrađuje bakterijske sferoplaste i protoplaste te inhibira 3\u27,5-fosfodiesterazu. Veliki troškovi proizvodnje i mali prinosi ograničavaju njegovu komercijalnu uporabu, pa je ispitana mogućnost povećanja proizvodnje surfaktina uzgojem mutanata Bacillus subtilis u tekućoj i na čvrstoj podlozi. U ovom su revijalnom prikazu opisana najnovija dostignuća u biosintezi, fermentaciji, purifikaciji, analizi i biomedicinskoj primjeni surfaktina
Another method to maintain positive-pressure ventilation through the Montgomery® T tube
We describe airway management in a patient who had a Montgomery® T tube in situ. The main concern pertaining to these patients is the inadequate depth of anaesthesia and ventilation, in view of loss of volume of air and gases, as well as dilution through the proximal end of the Montgomery® T tube. To circumvent these problems, we describe another method of providing ventilation, through the extraluminal horizontal limb of the Montgomery® T tube by introducing an uncuffed endotracheal tube and minimising the loss of carrier gases to the larynx, together with a review of literature for the same.Keywords: Montgomery® T tube, positive-pressure ventilationSouth Afr J Anaesth Analg 2013;19(5):274-27
Biosinteza, fermentacija, purifikacija i primjena surfaktina
Surfactin, a bacterial cyclic lipopeptide, is produced by various strains of Bacillus subtilis and is primarily recognized as one of the most effective biosurfactants. It has the ability to reduce surface tension of water from 72 to 27 mN/m at a concentration as low as 0.005 %. The structure of surfactin consists of seven amino acids bonded to the carboxyl and hydroxyl groups of a 14-carbon fatty acid. Surfactin possesses a number of biological activities such as the ability to lyse erythrocytes, inhibit clot formation, lyse bacterial spheroplasts and protoplasts, and inhibit cyclic 3\u27,5-monophosphate diesterase. The high cost of production and low yields have limited its use in various commercial applications. Both submerged and solid-state fermentation have been investigated with the mutational approach to improve the productivity. In this review, current state of knowledge on biosynthesis of surfactin, its fermentative production, purification, analytical methods and biomedical applications is presented.Surfaktin, ciklički lipopeptid izoliran iz različitih sojeva bakterije Bacillus subtilis, jedan je od najučinkovitijih biosurfaktanata, koji čak i u koncentraciji od 0,005 % smanjuje površinsku napetost vode sa 72 na 27 mN/m. Sastoji se od 7 aminokiselina vezanih karboksilnim i hidroksilnim skupinama na masnu kiselinu sa 14 ugljikovih atoma. Biološka je aktivnost surfaktina raznovrsna: razgrađuje eritrocite, sprečava zgrušavanje, razgrađuje bakterijske sferoplaste i protoplaste te inhibira 3\u27,5-fosfodiesterazu. Veliki troškovi proizvodnje i mali prinosi ograničavaju njegovu komercijalnu uporabu, pa je ispitana mogućnost povećanja proizvodnje surfaktina uzgojem mutanata Bacillus subtilis u tekućoj i na čvrstoj podlozi. U ovom su revijalnom prikazu opisana najnovija dostignuća u biosintezi, fermentaciji, purifikaciji, analizi i biomedicinskoj primjeni surfaktina
Transient Analysis of Primary Feed Pump Trip for 700 MWe IPHWR
700 MWe Indian Pressurized Heavy Water Reactor (IPHWR) is a horizontal channel type reactor with two loops of Primary Heat Transport (PHTS) system. Three (two operating and one stand by) main boiler feed water pumps (BFP) supply feed water to Steam Generators (SGs). In the event of one of the running BFP trip, standby comes on line on auto. Transient analysis for this event is performed using in- house computer code ATMIKA.T .The transient has been initiated by tripping one of the pumps.
Two cases are postulated:
1: BFP Trip and Standby BFP available on auto 2: BFP Trip and Standby pump not available.
This paper provides timelines of following sequence of events which is important for operator’s action to maneuver the event, and the main findings of the study are:
Following the tripping of one BFP, feed flow reduces and SGs level start falling. As SGs level fall, feed control valves open up in level control mode and system resistance in feed water circuit reduces. If the standby pump comes on auto, the SGs level recovers with a slight dip in level. The feed flow increases and settles down to normal value. Subsequently all the parameters converge to steady state value. Reactor continues to operate at 100% FP.
In the event of main BFP trip without the availability of standby BFP, feed flow rate drops. SGs pressure rise slightly due to reduction in sub cooled feed flow and SGs level start to decrease. Reactor setback starts as SG level goes below set back limit. SG level continues to fall and reactor trips on SG Level very very low trip setting
High Temperature Composite Analyzer (HITCAN) demonstration manual, version 1.0
This manual comprises a variety of demonstration cases for the HITCAN (HIgh Temperature Composite ANalyzer) code. HITCAN is a general purpose computer program for predicting nonlinear global structural and local stress-strain response of arbitrarily oriented, multilayered high temperature metal matrix composite structures. HITCAN is written in FORTRAN 77 computer language and has been configured and executed on the NASA Lewis Research Center CRAY XMP and YMP computers. Detailed description of all program variables and terms used in this manual may be found in the User's Manual. The demonstration includes various cases to illustrate the features and analysis capabilities of the HITCAN computer code. These cases include: (1) static analysis, (2) nonlinear quasi-static (incremental) analysis, (3) modal analysis, (4) buckling analysis, (5) fiber degradation effects, (6) fabrication-induced stresses for a variety of structures; namely, beam, plate, ring, shell, and built-up structures. A brief discussion of each demonstration case with the associated input data file is provided. Sample results taken from the actual computer output are also included
A new data analysis framework for the search of continuous gravitational wave signals
Continuous gravitational wave signals, like those expected by asymmetric
spinning neutron stars, are among the most promising targets for LIGO and Virgo
detectors. The development of fast and robust data analysis methods is crucial
to increase the chances of a detection. We have developed a new and flexible
general data analysis framework for the search of this kind of signals, which
allows to reduce the computational cost of the analysis by about two orders of
magnitude with respect to current procedures. This can correspond, at fixed
computing cost, to a sensitivity gain of up to 10%-20%, depending on the search
parameter space. Some possible applications are discussed, with a particular
focus on a directed search for sources in the Galactic center. Validation
through the injection of artificial signals in the data of Advanced LIGO first
observational science run is also shown.Comment: 21 pages, 8 figure
An improved algorithm for narrow-band searches of continuous gravitational waves
Continuous gravitational waves signals, emitted by asymmetric spinning
neutron stars, are among the main targets of current detectors like Advanced
LIGO and Virgo. In the case of sources, like pulsars, which rotational
parameters are measured through electromagnetic observations, typical searches
assume that the gravitational wave frequency is at a given known fixed ratio
with respect to the star rotational frequency. For instance, for a neutron star
rotating around one of its principal axis of inertia the gravitational signal
frequency would be exactly two times the rotational frequency of the star. It
is possible, however, that this assumption is wrong. This is why search
algorithms able to take into account a possible small mismatch between the
gravitational waves frequency and the frequency inferred from electromagnetic
observations have been developed. In this paper we present an improved pipeline
to perform such narrow-band searches for continuous gravitational waves from
neutron stars, about three orders of magnitude faster than previous
implementations. The algorithm that we have developed is based on the {\it
5-vectors} framework and is able to perform a fully coherent search over a
frequency band of width (Hertz) and for hundreds of spin-down
values running a few hours on a standard workstation. This new algorithm opens
the possibility of long coherence time searches for objects which rotational
parameters are highly uncertain.Comment: 19 pages, 8 figures, 6 tables, submitted to CQ
An observational study to determine accuracy of various methods used to assign gestational age and correlate with outcome
Background: Appropriate estimation of gestational age is paramount in obstetric care. Uncertain gestational age may lead to adverse pregnancy outcome like low birth weight, spontaneous or iatrogenic preterm delivery and perinatal mortality independent of maternal characteristics. In India, seeking of early medical attention in pregnancy is still not the norm. Three methods to estimate the estimated date of delivery are available, namely, menstrual history, clinical examination and by ultrasound. This study attempts to analyse the accuracy of the three methods used and their correlation with maternal and fetal outcome.Methods: 260 patients presenting to the outpatient department were enrolled irrespective of the gestational age but as soon as they got registered. Ultrasonography was advised if the patient did not have one. EDD was calculated by various methods and was recorded. If significant discrepancy existed, EDD was reassigned. Patients were followed up till the time of their delivery. After the delivery of the baby gestational age was assessed by the neonatologist and was compared with the gestational age at the time of delivery by the three methods. Maternal and fetal outcomes were compared in the form of avoided inductions and maturity of the baby at the time of delivery by all the three methods.Results: The kappa coefficient for the agreement between dating by ultrasound scan and neonatologist was 0.415 whereas for menstrual dates and clinical examination it was 0.197 and 0.369 respectively thus it can be interpreted that the accuracy of ultrasonography may be slightly better than menstrual dates and clinical examination. 75 patients required reassigning of EDD, Induction of labor for supposed post-term pregnancy was avoided in 13% of the patients.Conclusions: Ultrasonography was found to be accurate for determination of term /preterm/ post-term births followed by clinical examination and then the menstrual EDD. Induction of labor for supposed post-term pregnancy was avoided in 13% of the patients in whom EDD was ”assigned” thus stressing that EDD should be reassigned when there is discrepancy between menstrual EDD, Ultrasonography EDD and EDD by clinical examination
- …