2,922 research outputs found
The role of thermal and lubricant boundary layers in the transient thermal analysis of spur gears
An improved convection heat-transfer model has been developed for the prediction of the transient tooth surface temperature of spur gears. The dissipative quality of the lubricating fluid is shown to be limited to the capacity extent of the thermal boundary layer. This phenomenon can be of significance in the determination of the thermal limit of gears accelerating to the point where gear scoring occurs. Steady-state temperature prediction is improved considerably through the use of a variable integration time step that substantially reduces computer time. Computer-generated plots of temperature contours enable the user to animate the propagation of the thermal wave as the gears come into and out of contact, thus contributing to better understanding of this complex problem. This model has a much better capability at predicting gear-tooth temperatures than previous models
Guidelines for initiation of anti-tumour necrosis factor therapy in rheumatoid arthritis: similarities and differences across Europe.
Contains fulltext :
80544.pdf (publisher's version ) (Closed access
Femtosecond Laser-Induced Crystallization of Amorphous Silicon Thin Films under a Thin Molybdenum Layer
A new process to crystallize amorphous silicon without melting and the generation of excessive heating of nearby components is presented. We propose the addition of a molybdenum layer to improve the quality of the laser-induced crystallization over that achieved by direct irradiation of silicon alone. The advantages are that it allows the control of crystallite size by varying the applied fluence of a near-infrared femtosecond laser. It offers two fluence regimes for nanocrystallization and polycrystallization with small and large crystallite sizes, respectively. The high repetition rate of the compact femtosecond laser source enables high-quality crystallization over large areas. In this proposed method, a multilayer structure is irradiated with a single femtosecond laser pulse. The multilayer structure includes a substrate, a target amorphous Si layer coated with an additional molybdenum thin film. The Si layer is crystallized by irradiating the Mo layer at different fluence regimes. The transfer of energy from the irradiated Mo layer to the Si film causes the crystallization of amorphous Si at low temperatures (∼700 K). Numerical simulations were carried out to estimate the electron and lattice temperatures for different fluence regimes using a two-temperature model. The roles of direct phonon transport and inelastic electron scattering at the Mo-Si interface were considered in the transfer of energy from the Mo to the Si film. The simulations confirm the experimental evidence that amorphous Si was crystallized in an all-solid-state process at temperatures lower than the melting point of Si, which is consistent with the results from transmission electron microscopy (TEM) and Raman. The formation of crystallized Si with controlled crystallite size after laser treatment can lead to longer mean free paths for carriers and increased electrical conductivity
Vibration Signature Analysis of a Faulted Gear Transmission System
A comprehensive procedure in predicting faults in gear transmission systems under normal operating conditions is presented. Experimental data was obtained from a spiral bevel gear fatigue test rig at NASA Lewis Research Center. Time synchronous averaged vibration data was recorded throughout the test as the fault progressed from a small single pit to severe pitting over several teeth, and finally tooth fracture. A numerical procedure based on the Winger-Ville distribution was used to examine the time averaged vibration data. Results from the Wigner-Ville procedure are compared to results from a variety of signal analysis techniques which include time domain analysis methods and frequency analysis methods. Using photographs of the gear tooth at various stages of damage, the limitations and accuracy of the various techniques are compared and discussed. Conclusions are drawn from the comparison of the different approaches as well as the applicability of the Wigner-Ville method in predicting gear faults
NMR studies of Successive Phase Transitions in Na0.5CoO2 and K0.5CoO2
59Co- and 23Na-NMR measurements have been carried out on polycrystalline and
c-axis aligned samples of Na0.5CoO2, which exhibits successive transitions at
temperatures T = 87 K (= Tc1) and T = 53 K (= Tc2). 59Co-NMR has also been
carried out on c-axis aligned crystallites of K0.5CoO2 with similar successive
transitions at Tc1 ~ 60 K and Tc2 ~ 20 K. For Na0.5CoO2, two sets of three NMR
lines of 23Na nuclei explained by considering the quadrupolar frequencies nuQ
~1.32 and 1.40 MHz have been observed above Tc1, as is expected from the
crystalline structure. Rather complicated but characteristic variation of the
23Na-NMR spectra has been observed with varying T through the transition
temperatures, and the internal fields at two crystallographically distinct Na
sites are discussed on the basis of the magnetic structures reported
previously. The internal fields at two distinct Co sites observed below Tc1 and
the 591/T1-T curves of Na0.5CoO2 and K0.5CoO2 are also discussed in a
comparative way.Comment: 7 pages, 10 figures, submitted to J. Phys. Soc. Jpn, correction is
made in right colum of p6 (35th line) as K0.5CoO2-->Na0.5CoO
Increased angiogenic factor secretion by decidual natural killer cells from pregnancies with high uterine artery resistance alters trophoblast function.
STUDY QUESTION
Are the concentrations of factors secreted by decidual natural killer (dNK) cells from pregnancies at high risk of poor spiral artery remodelling different to those secreted from pregnancies at low risk?
SUMMARY ANSWER
Expression levels of PLGF, sIL-2R, endostatin and angiogenin were significantly increased by dNK cells from high-risk pregnancies, and angiogenin and endostatin were found to alter trophoblast function.
WHAT IS KNOWN ALREADY
During early pregnancy, maternal uterine spiral arteries are remodelled from small diameter, low-flow, high-resistance vessels into larger diameter, higher flow vessels, with low-resistance. This change is essential for the developing fetus to obtain sufficient oxygen and nutrients. dNK cells have been implicated in this process.
STUDY DESIGN, SIZE, DURATION
dNK cells were isolated from first trimester terminations of pregnancies (obtained with local ethical approval) screened for normal- or high-resistance index, indicative of cases least (21%) likely to have developed pre-eclampsia had the pregnancy not been terminated (n = 18 each group). Secreted factors and the effects of these on the trophoblast cell line, SGHPL-4, were assessed in vitro.
PARTICIPANTS/MATERIALS, SETTING, METHODS
A multiplex assay was used to assess dNK cell-secreted factors. SGHPL-4 cell functions were assessed using time-lapse microscopy, 3D invasion assays, endothelial-like tube formation ability and western blot analysis.
MAIN RESULTS AND THE ROLE OF CHANCE
The expression levels of PLGF (P < 0.01), sIL-2R (P < 0.01), endostatin (P < 0.05) and angiogenin (P < 0.05) were significantly increased by dNK cells from high-risk pregnancies. Endostatin significantly decreased SGHPL-4 invasion (P < 0.05), SGHPL-4 tube formation (P < 0.05) and SGHPL-4 Aktser473 phosphorylation (P < 0.05). Angiogenin significantly decreased SGHPL-4 invasion (P < 0.05), but increased SGHPL-4 tube formation (P < 0.01) and decreased SGHPL-4 Aktser473 phosphorylation (P < 0.05).
LIMITATIONS, REASONS FOR CAUTION
The culture of dNK cells and protein concentrations in vitro may not fully represent the in vivo situation. Although SGHPL-4 cells are extravillous trophoblast derived, further studies would be needed to confirm the roles of angiogenin and endostatin in vivo.
WIDER IMPLICATIONS OF THE FINDINGS
The altered expression of secreted factors of dNK cells may contribute to pregnancy disorders associated with poor spiral artery remodelling.
STUDY FUNDING/COMPETING INTEREST(S)
This study was supported by the Wellcome Trust (project reference 091550). R.F. was a recipient of a PhD studentship from the Division of Biomedical Sciences, St. George's, University of London. The authors have no conflict of interests
High-sensitivity troponin I concentrations are a marker of an advanced hypertrophic response and adverse outcomes in patients with aortic stenosis
Aims:
High-sensitivity cardiac troponin I (cTnI) assays hold promise in detecting the transition from hypertrophy to heart failure in aortic stenosis. We sought to investigate the mechanism for troponin release in patients with aortic stenosis and whether plasma cTnI concentrations are associated with long-term outcome.
Methods and results:
Plasma cTnI concentrations were measured in two patient cohorts using a high-sensitivity assay. First, in the Mechanism Cohort, 122 patients with aortic stenosis (median age 71, 67% male, aortic valve area 1.0 ± 0.4 cm2) underwent cardiovascular magnetic resonance and echocardiography to assess left ventricular (LV) myocardial mass, function, and fibrosis. The indexed LV mass and measures of replacement fibrosis (late gadolinium enhancement) were associated with cTnI concentrations independent of age, sex, coronary artery disease, aortic stenosis severity, and diastolic function. In the separate Outcome Cohort, 131 patients originally recruited into the Scottish Aortic Stenosis and Lipid Lowering Trial, Impact of REgression (SALTIRE) study, had long-term follow-up for the occurrence of aortic valve replacement (AVR) and cardiovascular deaths. Over a median follow-up of 10.6 years (1178 patient-years), 24 patients died from a cardiovascular cause and 60 patients had an AVR. Plasma cTnI concentrations were associated with AVR or cardiovascular death HR 1.77 (95% CI, 1.22 to 2.55) independent of age, sex, systolic ejection fraction, and aortic stenosis severity.
Conclusions:
In patients with aortic stenosis, plasma cTnI concentration is associated with advanced hypertrophy and replacement myocardial fibrosis as well as AVR or cardiovascular death
Limited heat tolerance in a cold-adapted seabird: Implications of a warming Arctic
The Arctic is warming at approximately twice the global rate, with welldocumented indirect effects on wildlife. However, few studies have examined the direct effects of warming temperatures on Arctic wildlife, leaving the importance of heat stress unclear. Here, we assessed the direct effects of increasing air temperatures on the physiology of thick-billed murres (Uria lomvia), an Arctic seabird with reported mortalities due to heat stress while nesting on sun-exposed cliffs.We used flow-through respirometry to measure the response of body temperature, resting metabolic rate, evaporative water loss and evaporative cooling efficiency (the ratio of evaporative heat loss to metabolic heat production) in murres while experimentally increasing air temperature. Murres had limited heat tolerance, exhibiting: (1) a low maximum body temperature (43.3°C); (2) a moderate increase in resting metabolic rate relative that within their thermoneutral zone (1.57 times); (3) a small increase in evaporative water loss rate relative that within their thermoneutral zone (1.26 times); and (4) a low maximum evaporative cooling efficiency (0.33). Moreover, evaporative cooling efficiency decreased with increasing air temperature, suggesting murres were producing heat at a faster rate than they were dissipating it. Larger murres also had a higher rate of increase in resting metabolic rate and a lower rate of increase in evaporative water loss than smaller murres; therefore, evaporative cooling efficiency declined with increasing body mass. As a coldadapted bird, murres\u27 limited heat tolerance likely explains their mortality on warm days. Direct effects of overheating on Arctic wildlife may be an important but under-reported impact of climate change
- …